Operation Manual

Butler 1200/1210

• Press the Up or Down key repeatedly until ‘BASE SEL’ appears on the display.

• Press the Programming key .

• Press the Up or Down key repeatedly until ‘AUTO’ appears on the display.

• Press the Programming key .

• ‘SEARCHING’ and the symbol appear on the display.

• A signal sounds once the handset has found a base unit.

4.26.2 Manual selection

If you set the handset to ‘manual selection’, the handset will only choose the base unit you

have set.

• Press the Programming key .

• Press the Up or Down key repeatedly until ‘SETTING’ appears on the display.

• Press the Programming key .

• Press the Up or Down key repeatedly until ‘BASE SEL’ appears on the display.

• Press the Programming key .

• Press the Up or Down key repeatedly until ‘MANUAL’ appears on the display.

• Press the Programming key .

• ‘BASE -‘ appears on the display.

• Enter the number of the base unit you want to select (1-4). Use the number keypad.

• Press the Programming key .

• ‘SEARCHING’ and the symbol appear on the display.

• A signal sounds once the selected base unit has been found.

Notes :

• Before you can select a base unit, the base unit must be subscribed to the handset ﬁrst.

• If ‘NOT SUB’ appears on the display, this means the selected base unit does not exist or the handset has

not been subscribed.

4.27 Barring outgoing calls

You can program the handsets to bar calls to certain telephone numbers so that for instance ‘00’

international numbers cannot be called. Up to 5 numbers (of max. 5 digits) can be barred.

To do this, do the following:

• Press the Programming key .

• Press the Up or Down key repeatedly until ‘SETTING’ appears on the display.

• Press the Programming key .

• Press the Up or Down key repeatedly until ‘BARRING’ appears on the display.

• Press the Programming key .

• ‘PIN’ appears on the display.

• Enter your PIN code

• Press the Programming key .

• ‘BAR NUM ’ appears on the display. You are in memory “1. _ _ _ _ _”.

• Press the Up or Down key to select one of the 5 memories.

• Enter the number (max. 5 digits) to be barred, e.g. 01486.

• Press the Programming key .

• ‘HS _ _ _ _ _’ (= number on the handset (1-5)) ‘01486’ (= the barred numbers) appear on

the display.