Operation Manual
Topcom Butler 3250 9
Topcom Butler 3250
ENGLISH
To change the mode of dialling:
•Press and hold the flash R button to toggle between dialling modes:
‘P’ will appear when set to pulse or ‘T’ when set to tone (DTMF) dialling
•After 5 sec. the unit returns to standby
6. CALLER-ID FUNCTION (CLIP)
The Topcom B3250 displays the telephone numbers of incoming calls. This function is only possible if you are
subscribed to a telephone operator that provides this service. Contact your telephone provider for more information.
When you receive a call, the numbers are saved in a Call list. This list can hold 20 telephone numbers (each of max.
25 digits). If the number is longer then 14 digits, you can press the key to show the other digits!
6.1 NEW CALLS
When you’ve received a new unanswered call, the CLIP symbol will blink on the display.
6.2 CONSULTING THE CALL LIST
•Press the Call Log button . The last received call is shown on the display. If the list is empty, ‘NO CLIP’ is shown
on the display.
•The following will be shown on the display:
•After 5 seconds, the telephone number will be shown. You can skip the date/time by pressing the button.
•Use the left scroll key
to scroll to the previous call. Use the button to show the next call.
•You can leave the Call list by pressing the button.
* ONLY WHEN THE NETWORK SENDS THE TIME/DATE TOGETHER WITH THE TELEPHONE NUMBER!!! On
some networks with caller ID, time and date will not be displayed
6.3 CALLING A NUMBER FROM THE CALL LIST
•Scroll through the Call list until the desired number is shown on the display.
•Press the Line button . The number will be dialled automatically.
6.4 ERASING A NUMBER FROM THE CALL LIST
•Scroll through the Call list until the desired number is shown on the display.
•Press and hold the Mute button for 3 sec. to erase the number.
6.5 STORE A NUMBER FROM THE CALL LOG INTO THE MEMORY
•Scroll through the Call list until the desired number is shown on the display.
•Press and hold the Memory button for 3 sec.
•Enter the memory location (0-9) where you want to store the number
•Enter the Memory button again to confirm and to go back to standby
Date (DD-MM) *
Progress number Time (24h format) *
HL_B3250_eur.book Page 9 Wednesday, September 15, 2004 1:19 PM