Product Manual

INTENDED USE
This jack is designed to lift and raise outboard marine engines only. The jack features an
overload valve bypass system to prevent jack damage and user injury. Compact design allows
use in confined spaces. Easily fits under low mounted marine engines. Meets ASME PALD
safety standards.
TECHNICAL SPECIFICATIONS
Item
Description
Rated Capacity
750-lbs.
Min. Lift Height (in.)
18.89in.
Max. Lift Height (in.)
33.1in.
Forward Tilt Degree
5°
Aft Tilt Degree
12°
Left Tilt Degree
9.5°
Right Tilt Degree
13°
Base L x W x h(in.)
45.87 x 25.98 x 18.9in.
Safe Operating Temperature is between 40°F – 105°F (4°C - 41°C)
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions
listed below may result in serious injury.
CAUTION: Do not allow persons to operate or assemble this jack until they have
read this manual and have developed a thorough understanding of how the jack works.
WARNING: The warnings, cautions, and instructions discussed in this
instruction manual cannot cover all possible conditions or situations that could occur.
It must be understood by the operator that common sense and caution are factors that cannot
be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS