Product Manual

SAFETY MARKINGS
WARNING:
1. Study, understand, and follow all instructions before operating this device.
2. Do not exceed rated capacity.
3. Use only on hard, level surfaces.
4. Lifting device only. Immediately after lifting, support the marine engine with appropriate
means.
5. Do not move or dolly the boat while on the jack.
6. Lift only on areas of the marine engine as specified by the marine engine
manufacturer.
7. No alterations shall be made to this product.
8. Only attachments and/or adapters supplied by the manufacturer shall be used.
9. Do not get under or allow anyone under the marine engine until it has been supported
with appropriate means.
10. Center load on saddle prior to lifting.
11. Use wheel chocks or other blocking device on opposing wheels before using jack.
12. Secure boat hull and trailer to ensure no shifting, movement, or tipping will occur when
removing the marine engine.
13. Do not use this jack for any use other than the manufacturer specified usage.
14. Failure to heed these markings may result in personal injury and/or property damage.
GENERAL SAFETY INSTRUCTIONS:
Position the Jack
Position the jack to only lift on the areas of the marine engine as specified by the manufacturer.
After lifting the marine engine always support the load with appropriate means before working
on the marine engine.
Do Not Overload Jack
Do not overload this jack beyond its rated capacity. Overloading this jack beyond its rated
capacity can cause damage to or failure of the jack.
Always Use on Hard Level Surfaces
This jack is designed only for use on hard level surfaces capable of sustaining the load. Use
on unstable or other possible loss of load.
Chock and Block (Stabilize)
Apply parking brake in vehicle before operating jack.
A chock is a wedge for steadying an object and holding it motionless, or for preventing the
movement of a wheel
Chock the wheel opposite the end being lifted.