Operator's Manual

ManualsBrandsToro ManualsGas Snow BlowersPower TRX 32 in. Two-Stage Electric Start Gas Snow Blower 1432 OHXE with Steel Chute, Power Steering and Heated Grips

9.Wait3minutesfortheoiltosettleintheengine.

10.Wipethedipstickcleanwithacleancloth.

11.Insertthedipstickintotheoil-lltubeandscrew

itin,thenremovethedipstick.

12.Readtheoillevelonthedipstick.

•Iftheoillevelonthedipstickistoolow,

carefullypourasmallamountofoilinto

theoil-lltube,wait3minutes,andrepeat

steps10through12untiltheoillevelonthe

dipstickiscorrect.

•Iftheoillevelonthedipstickistoohigh,

draintheexcessoiluntiltheoillevelonthe

dipstickiscorrect.

Important:Iftheoillevelintheengineistoo

lowortoohighandyouruntheengine,you

maydamagetheengine.

13.Installthedipstickintotheoil-lltubesecurely.

ReplacingtheSparkPlug

ServiceInterval:Every100hours—Replacethe

sparkplug.

WARNING

Replacingthesparkplugwhiletheengineis

hotcanresultinburns.

Waituntiltheengineiscooltoreplacethe

sparkplug.

UseaT orosparkplugorequivalent(Champion®

RN9YCorNGKBPR6ES).

1.Removetheboot(Figure37).

g016645

Figure37

1.Spark-plugboot

2.Cleanaroundthebaseofthesparkplug.

g016646

Figure38

3.Removeanddiscardtheoldsparkplug.

Note:Youwillneedaratchetwrenchextension

toremovethesparkplug.

4.Setthegapbetweentheelectrodesonanew

sparkplugat0.76mm(0.030inch)asshown

inFigure39.

g001029

Figure39

1.0.76mm(0.030inch)

5.Installthenewsparkplug,tightenitrmly,and

attachtheignitionwiretothesparkplug.

Note:Ensurethattheignitionwiresnaps

completelyintoplaceonthesparkplug.

ReplacingtheDriveBelts

Iftheauger/impellerdrivebeltorthetraction-drivebelt

becomesworn,oil-soaked,orotherwisedamaged,

haveanAuthorizedServiceDealerreplacethebelt.

21