Operator's Manual

ControlsSystem
Maintenance
AdjustingtheTiltKnob
1.SettheDyna-ClutchlevertotheStopposition,
shutofftheengine,andwaitforallmovingparts
tostop.
2.Disconnectthewirefromthesparkplug.
3.Attachanoverheadlifttotheliftingpointonthe
machineandliftitoffoftheground.
4.Turnthetiltknobuntilthereisenoughcable
slacktoaccessthetiltlocknut(Figure27).
g019446
Figure27
1.Tiltknob6.Nut
2.Bearing7.Tiltblock
3.Tiltrod8.Tiltcable
4.Tiltlocknut
9.Setscrew
5.Washer
5.Tightenthelocknutagainstthebearingthen
loosenitslightly.Setitwiththesetscrew(Figure
27).
6.Adjustthenutsinsidethetiltblocktotakeup
anycableslack.
Note:Replacethecablesiffulltiltisnolonger
obtainable.
AdjustingtheProPitch
LinkageRod
1.SettheDyna-ClutchlevertotheStopposition,
shutofftheengine,andwaitforallmovingparts
tostop.
2.Disconnectthewirefromthesparkplug.
3.Attachanoverheadlifttotheliftingpointonthe
machineandliftifoffoftheground.
4.Loosenthenutontheupperendofthelinkage
rodtoallowslackintheliftcable(Figure28).
g019445
Figure28
1.Nut4.Linkagerod
2.Swivel
5.Nut
3.Nut6.Yokeend
5.PositiontheProPitchhandleinthefulltilt
position.
6.Adjustthenutonthebacksideoftheswivel
attheupperendofthelinkageroduntilyou
achievethepropergapofapproximately0.4
mm(1/64inch)betweenthetiltleverandthe
gearcase.
7.Tightenthenutontheoutsideoftheswivelto
lockthelinkagerodintoposition.
22