9/22/26/32AV71*B AV71*B1 and 32/40LV71*B DIGITAL Series
Contents Safety Precautions........................................ 3 Sound controls............................................ 25 Installation and important information........ 4 Volume...................................................... 25 The remote control........................................ 6 Balance, Bass, Treble.............................. 25 Inserting batteries and effective range of the remote.................................................. 7 Surround Sound........................
REGZA-LINK Controls................................. 36 Digital on-screen information and programme guide........................................ 46 Equipment Control.................................. 36 Information............................................... 46 Input Source Selection............................ 37 Guide......................................................... 47 Pass-Through Control............................. 37 EPG Timer.................................................
SETTING UP English Safety Precautions DO be careful with glass panels on equipment. This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased.
English SETTING UP Installation and important information Where to install Locate the television away from direct sunlight and Sturdy tie strong lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Hook Place the TV set on a stable, level surface that can support the weight of the TV.
SETTING UP English SYMBOL SYMBOL DEFINITION DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated "DANGEROUS VOLTAGE" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
English SETTING UP The remote control Simple at-a-glance reference of your remote control.
SETTING UP English Inserting batteries and effective range of the remote Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round. Suitable battery types for this remote are AAA, IEC R03 1.5V. Do not combine a used, old battery with a new one or mix battery types. Remove dead batteries immediately to prevent acid from leaking into the battery compartment. Dispose of them in accordance with instructions on page 56 of this manual.
English SETTING UP Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. Connect the power cord into the AC-IN socket found at the back of the TV. Model 19/22 *a decoder could be Digital Satellite or any other compatible decoder.
SETTING UP English Aerial cables: - - - - - - - - - - - - - - - - Connect the aerial to the ANT socket on the rear of the television. If you use a decoder and/or a media recorder, it is essential that the aerial cable is connected through the aerial socket on the decoder and/ or on the media recorder to the TV. SCART leads: - - - - - - - - - - - - - - - - Connect the video recorder IN/OUT or decoder TV socket to the television. Connect the media recorder SAT socket to the decoder MEDIA REC. socket.
English SETTING UP REGZA-LINK Connections The basic functions of connected audio/video equipment can be controlled using the television's remote control if a REGZA-LINK compatible device is connected.
SETTING UP English Connecting an HDMI® or DVI device to the HDMI input The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device.
English SETTING UP Model 26/32/40 1 2 HDMI device HDMI out To view the HDMI device video, press to select the mode.
SETTING UP Connect an HDMI-to-DVI adapter cable (HDMI type A connector) to HDMI1 terminal and audio cables to the PC/HDMI1 Audio socket (see illustration). • he recommended HDMI-to-DVI adapter cable length is 6.6 ft (2m). T An HDMI-to-DVI adapter cable transfers video only. • Separate analogue audio cables are required.
English SETTING UP Model 26/32/40 PC/HDMI 1 (AUDIO) 1 2 Audio cable for HDMI to television connection (not supplied) HDMI-to-DVI adapter cable (not supplied) DVI device NOTE: To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures: • hen turning on your electronic components, turn on the television first, and then the HDMI or W DVI device.
SETTING UP English Connecting a computer With the HDMI connection, you can watch your computer’s display on the television and hear the sound from the televisions speakers. To connect a PC to the HDMI terminal When connecting a PC to the HDMI terminal on the television, use an HDMI-to-DVI adapter cable and analogue audio cables. If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). Separate analogue cables are not necessary (see page 11).
English SETTING UP Acceptable Video signals through HDMI terminals Format Resolution Refresh Rate H. Frequency Pixel Clock VGA 640 x 480 60.000Hz 31.500kHz 25.200MHz 59.940Hz 31.469kHz 25.175MHz 72.809Hz 37.861kHz 31.500MHz 75.000Hz 37.500kHz 31.500MHz 60.000Hz 15.750kHz 27.000MHz 59.940Hz 15.734kHz 27.000MHz 480i 720 x 480 576i 720 x 576 50.000Hz 15.625kHz 27.000MHz 480p 720 x 480 60.000Hz 31.500kHz 27.027MHz 59.940Hz 31.469kHz 27.000MHz 576p 720 x 576 50.
SETTING UP English Using the controls Whilst all the necessary adjustments and controls for the television are done using the remote control, the buttons on the television may be used for some functions. NOTE: COMMON INTERFACE (CI) The common interface is for a Conditional Access Module (CAM). Contact a service provider for details.
English SETTING UP Switching on Before switching on the television, make sure to connect the aerial cable, and select TV as the input source. If the RED LED is off, check that the mains plug is connected to the power supply. If the picture does not appear, press on the remote control, it may take a few seconds to appear. To put the television into Standby mode, press on the remote control. To view the picture, press again. The picture may take a few seconds to appear.
TUNING THE TELEVISION Before switching on the television, put your decoder and media recorder to Standby if they are connected. ress ▲ or ▼ to select your country and P press ► to the next step. Initial Setup Country Please select your country: Make sure to connect the aerial cable, and select TV as the input source. United Kingdom Italy Netherlands Sweden Bulgaria Greece Russia To set up the television, press the buttons on the remote control as detailed on page 6.
English TUNING THE TELEVISION Select Auto Scan and press Setting the programmes NOTE: When Channel Block is activated the 4-digit password is needed to enter the Channels submenu under SETUP menu. Channels Auto Scan Update Scan Analogue Manual Scan Favorite Network Select Auto Scan Channel Skip Channel Sort Channel Edit The Auto Scan will completely re-tune the television and can be used to update the channel list.
TUNING THE TELEVISION Favorite Network Select Search the new channels that are not in the programme list. Press MENU and press ◄ or ► to select SETUP. If there are more than two networks detected after running the Auto Scan in Channels menu, you can select the network you prefer. Select Channels from the SETUP menu. Press ▼ to highlight Channels and press ► or . Select Update Scan and press scanning. Highlight Favorite Network Select and press ► or to enter.
English TUNING THE TELEVISION Channel Skip Select Analogue Manual Scan and press ► or to confirm it. To prevent certain programmes from being viewed, the programme position can be skipped. The remote control must be removed as the channels will still be available using the number buttons. Programmes can then be watched as normal using the controls on the television, but the television will not show the skipped programme position.
TUNING THE TELEVISION Change the order of the programme list. Select Channels from the SETUP menu. Highlight Channel Sort and press ► or to enter. The number buttons on the remote control have the following characters assigned to them. Use the language characters to enter text. Repeatedly pressing the numbered key changes the text character, pressing ◄ deletes the previous text character.
English CONTROLS AND FEATURES Analogue Channel Fine Tune When the reception is poor, you can use this function to do the fine tuning. In the SETUP menu, press ▼ to highlight Channels and press ► or to enter. ress ▼ to highlight Analogue Channel P Fine Tune and press to enter. Highlight and press channel. 4 Common Interface This function enables you to watch some pay services (encrypted services). When the module is inserted into the CI slot, you can access the module menu.
CONTROLS AND FEATURES Selecting programme positions Quick access menu helps you access some options quickly, such as Picture Mode, Picture Size, Sleep, REGZA-LINK, and Media Player. Press QUICK button to display the Quick access menu and press ▲ or ▼ to select the option. To select a programme position, press the numbered buttons on remote control. The programme positions can also be selected by pressing P and P . Quick access Picture Mode Standard To display on-screen information, i.e.
English CONTROLS AND FEATURES Surround Sound Audio Description This function enriches (expanding and deepening) the sound quality. In the SOUND menu, press ▼ to select Surround Sound. Press ◄ or ► to switch function On or Off. Audio Description is an additional narration describing on-screen action, body language, expressions and movements for people with visual disabilities whilst watching the TV. This function enables you to choose the type of narrations. Press MENU and press ◄ or ► to select SOUND.
CONTROLS AND FEATURES English 4 Make sure the Speaker Out option is set to On. Press ▼ to highlight Volume option, and press ◄ or ► to adjust the volume. Manufactured under licence from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Visually Impaired Speaker Out Volume On 20 Select RETURN Back EXIT Exit Advanced Audio Settings The Advanced Audio settings help to create an enhanced surround sound experience with deep, rich bass from stereo sound sources.
English CONTROLS AND FEATURES Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Native Wide This setting is available when watching video signal source via HDMI, and will show the picture without over scan. Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.
CONTROLS AND FEATURES English Use this setting when watching a 14:9 broadcast. 14:9 PC Wide Use this setting for PC connected via HDMI or RGB/PC terminal when receiving PC signal format. This setting will display the image without picture clipping. PC Normal Use this setting for PC connected via HDMI or RGB/PC terminal when receiving PC signal format. This setting will display the image correctly without distortion or picture clipping. Dot by Dot “Dot by Dot” is a non-scaling display.
English CONTROLS AND FEATURES Back Light Adjustment Picture controls Adjusting the Back Light can improve the clarity of the screen when viewing. Picture Mode Press MENU and press ◄ or ► to select PICTURE. You can adjust the best picture appearance by selecting the preset value in picture mode based on the programme category. Press ▼ to highlight Back Light and press ◄ or ► to adjust. Press MENU and press ◄ or ► to select PICTURE.
CONTROLS AND FEATURES Press ▲ or ▼ to highlight NR and press ► or to enter. ress ▲ or ▼ to highlight DNR and press P ◄ or ► to select Low, Middle, High, Auto or Off. Colour Temperature Colour Temperature User R Gain 0 G Gain 0 B Gain 0 NR Select RETURN Back EXIT DNR Auto MPEG NR Low Exit NOTE: R/G/B Gain: Increase or decrease the red/green/blue levels in the picture.
English CONTROLS AND FEATURES Adaptive Luma Control 3D Colour Management Automatically adjusts the brightness and contrast after analyzing the input signal. This function enriches the colours and the depth of the picture. When 3D Colour Management is selected, it allows the ‘Base Colour Adjustment’ feature to become available. In the PICTURE menu, press ▼ to highlight Advanced Video and press ► or to enter. In the PICTURE menu, press ▲ or ▼ to highlight Advanced Video and press ► or to enter.
CONTROLS AND FEATURES H./V. Position Adjust the horizontal and vertical position of the picture. Advanced Video Cinema Mode In the PICTURE menu, press ▲ or ▼ to highlight Advanced Video and press ► or to enter. On NR CTI Auto Adaptive Luma Control 7 Active Backlight On Blue Screen Off 3D Colour Management On Press ▼ to highlight H./V. Position and press ► or to enter. Base Colour Adjustment OK Enter English Press ▲ or ▼ to highlight Base Colour Adjustment and then press ► or .
English CONTROLS AND FEATURES Time Timer control The time is set automatically when receiving a digital signal. (You can set the time manually only if the TV has no DTV signal.) Time Zone When you select a Time Zone, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal. You must set the time correctly before using Power On/Off Timer function.
CONTROLS AND FEATURES The television can be set to turn itself Off automatically after a preset time. Press ▼ to highlight Sleep Timer in the APPLICATIONS menu. Press ◄ or ► to set the timer from Off, 10, 20, 30, 40, 50, 60, 90 or 120 Minutes. Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 8 for a clear view of the back connection recommendations.
English CONTROLS AND FEATURES Input signal selection REGZA-LINK Controls This specifies the type of signal going into SCART on the back of the television. Please refer to the manufacturers instructions for the connected equipment. In the SETUP menu, press ▼ to highlight SCART, then press ► or to enter. This feature uses CEC (Consumer Electronics Control) technology, and allows the control of Toshiba REGZA-LINK compatible equipment from the television’s remote control.
CONTROLS AND FEATURES When any equipment using CEC technology is connected, the REGZA-LINK icon will appear in the input source list allowing selection of individual devices. Press . A list will appear on screen showing modes and all stored external equipment. The following features are dependent on the connected equipment. For operating information, refer to the operation manual for all connected equipment.
English CONTROLS AND FEATURES PC Link REGZA-LINK Menus This feature automatically adjusts the suitable widescreen formats and picture preferences when connected to a REGZA-LINK PC. By activating the Enable REGZA-LINK feature in the REGZA-LINK setup menu, individual REGZA-LINK features can then be activated. NOTE: This feature is dependent on the connected equipment.
CONTROLS AND FEATURES When the Auto Standby is enabled, switching off the television will automatically switch off all connected REGZA-LINK equipment. In the REGZA-LINK Setup menu, press ▼ to highlight Auto Standby. Press ◄ or ► to select On or Off. English Auto Standby Media Player Enter Media Player The Media Player allows the viewing of photos (JPEG files) and music (MP3 files) stored in a USB storage device. (Connectivity is not guaranteed for all devices.
English CONTROLS AND FEATURES Photo Multi-View Playing Photo Slideshow This view mode allows all the images within a selected folder to be viewed simultaneously, using thumbnail views in a grid. The initial highlighted position will be the top left image within the grid. This view mode displays all the images in a selected folder as a slideshow, scrolling through them automatically. In the Multi View grid, press ▲, ▼, ◄, or ► to highlight an image. Press .
CONTROLS AND FEATURES Playing Music This view mode allows all the music files within a selected folder to be viewed simultaneously, using thumbnail views in a grid. The initial highlighted position will be the top left image within the grid. The Music feature plays MP3 files stored on a USB storage device. In the Multi View grid, press ▲, ▼, ◄, or ► to highlight a music file. Press to start playing all the music files in the selected folder. Open Media Player. Press ▼ to highlight Music.
English CONTROLS AND FEATURES Digital Subtitle Preference control Use the Digital Subtitle function when two or more subtitle languages are broadcasted. If subtitle data in a selected language is not broadcasted, the default language subtitle will be displayed. Analogue Subtitle You can set the subtitle on or off whilst watching TV. Highlight Subtitle in the PREFERENCES menu, and press ► or to enter. Highlight Subtitle in the PREFERENCES menu, and press ► or to enter.
CONTROLS AND FEATURES Game Mode If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time the programme positions are changed, and then disappear after a few seconds. If the broadcast is not in stereo, the word Mono will appear. The Game Mode helps to speed up video response for game application. In the PREFERENCES menu, press ▼ to highlight Audio Channel. Press ◄ or ► to select Stereo, Dual1, Dual2, or Mono.
English CONTROLS AND FEATURES Parental control Press ▼ to highlight the Channel Block and press ► or to enter. This function blocks channels or programmes that you do not want to or that you do not want your children to watch. A password is required to access this function. The factory default password is “0000”. Parental Channel Block Programme Block Input Block Change Password OK 4 Channel Block This function blocks channels that you do not want to or that you do not want your children to watch.
CONTROLS AND FEATURES English 4 Model 26/32/40 Press ◄ or ► to set the Age Rating from age 4~18 or select None to turn this function off. Input Block 1 Programme Block Age Rating None TV 2 SCART 1 3 SCART 2 4 AV 5 Component 6 HDMI 1 7 HDMI 2 8 HDMI 3 9 PC OK Select RETURN Back EXIT Exit Set Select RETURN Back EXIT Exit NOTE: The "HDMI 3" port is available for model 32/40LV71*B only. NOTE: This function is available for the programme with Age Rating information.
English CONTROLS AND FEATURES Panel Lock You can lock the control buttons on your TV by using this Panel Lock. When this function enables, the TV can be controlled only by the remote control. Highlight Parental in the SETUP menu, and press ► or to enter. Digital on-screen information and programme guide The on-screen information and programme guide give access to programme details for all available channels. Information Enter the 4-digit password.
CONTROLS AND FEATURES Software upgrade and system information Select the on-screen guide by pressing GUIDE, the guide screen will appear highlighting details of the programme and event currently being viewed. This may take a few moments to appear. Auto Download This feature enables your TV to download new software by air automatically. Press ◄ or ► for information on other events scheduled for the programme selected. In the SETUP menu, press ▼ to highlight Software Upgrade and press ► or to enter.
English CONTROLS AND FEATURES Manual OAD System Information This feature enables upgrading your TV software by air manually. This feature can be used to check the version of software currently installed. In the SETUP menu, press ▼ to highlight Software Upgrade and press ► or to enter. In the SETUP menu, press ▼ to highlight Software Upgrade and press ► or to enter. Press ▼ to highlight Manual OAD and press ► or to enter. Press ▼ to highlight System Information.
TEXT SERVICES This television has a multi-page text memory, which takes a few moments to load. Setting the Language You can set the teletext language. In the PREFERENCES menu, press ▼ to highlight Teletext, then press ► or to confirm. PREFERENCES REGZA-LINK Setup Teletext Subtitle Stereo Audio Channel Auto Format Off 4:3 Stretch Off Side Panel 1 OK Select RETURN Back Enter EXIT Exit Press ▲ and ▼ to select the options, and then press ◄ and ► to select the language.
English PROBLEM SOLVING Questions and Answers Below are the answers to some of the most common queries. Q A Q A Q A Q A Q A Q A Q A Q A Q A Q Why is there no sound or picture? Check the television is not in standby mode. Check the mains plug and all mains connections. Why is there incorrect or no sound when in DTV mode? Press to ensure the hard of hearing option has not been selected.
PROBLEM SOLVING English Q A Q A Q A Q A Q A Why does the TV turn off by itself? After roughly 15 minutes without any input video signal at TV mode, the TV will turn off to save power. Does this TV support the DPMS? This set is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer which supports VESA DPMS. To exit DPMS mode, press button on the remote control to wake up the TV.
English INFORMATION Specifications and accessories • • This television complies with the specification listed below. Design and specifications are subject to change without notice.
INFORMATION The software pre-installed in the TOSHIBA Digital Televisions consists of multiple, independent software components. Each software component is copyrighted by TOSHIBA or a third party. The TOSHIBA Digital Televisions uses software components that are distributed as freeware under a third-party end-user license agreement or copyright notice (hereinafter referred to as a “EULA”).
English INFORMATION Exhibit A Portions of this software are copyright © <2007> The FreeType Project (www.freetype.org). All rights reserved Exhibit B ICU License - ICU 1.8.1 and later COPYRIGHT AND PERMISSION NOTICE Copyright © 1995-2006 International Business Machines Corporation and others All rights reserved.
INFORMATION English DVB is a registered trademark of the DVB Project HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Printed on recycled paper. 100% Chlorine free. © TOSHIBA Television Central Europe Sp. z o.o. All rights reserved. Reproduction in whole or part without written permission is strictly prohibited. TOSHIBA Television Central Europe Sp. z o.o. ul.
English INFORMATION Notes For your own records Cleaning the screen and cabinet… Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. Disposal… The following information is only for EU-member states: Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste.
