Operation Manual

English
19
TUNING THE TELEVISION
Tuning the television
Before switching on the television, put your
decoder and media recorder to Standby if they
are connected.
Make sure to connect the aerial cable, and select
TV as the input source.
To set up the television, press the buttons on the
remote control as detailed on page 6.
Initial Setup
Connect the television to the main power
and press the button. The Initial Setup
screen will appear at the rst use.
Press to start the initial setup.
Initial Setup
Welcome to the initial
setup wizard.
Please press [OK] to
start the wizard.
Welcome
Next
Press ▲ or ▼ to select your language, and
then press ►.
Initial Setup
Please select your
language:
Back Select Next Exit
EXIT
English
Language
Français
Español
Italiano
Ελληνικά
Български
Deutsch
Press ▲ or ▼ to select between Home or
Store mode (for normal home use, select
Home), and then press ►.
If Home mode is selected, the Standard
picture mode will be selected
Initial Setup
To use this TV for
displaying in a retail
showroom, please select
[Store].
[Home] mode is
recommended for normal
home use.
Back Select Next Exit
EXIT
Home
Engrgy Saving Mode
Store
4
Press ▲ or ▼ to select your country and
press ► to the next step.
Initial Setup
Please select your
country:
Back Select Next
EXIT
United Kingdom
Country
Netherlands
Italy
Bulgaria
Greece
Russia
Sweden
Exit
To start channel scan, press ►.
Initial Setup
First, please connect
antenna.
Start channel scan now ?
If you skip this step, the
channel scan can be
performed in the TV
Menu.
0%
Back Select Next
EXIT
Scan
Channel Scan
Skip Scan
Exit
The search will begin for all available stations.
The slide bar will move along the line as the
search progresses.
The initial setup is now complete. Press
to exit the wizard.
Initial Setup
Congratulations!!
Initial Setup Complete.
Please press [OK] to exit
the wizard.
Complete
Back Select Next Exit
EXIT
NOTE 1: If you skip this step, the channel scan
can be performed in the TV Menu.
NOTE 2: The time will be set automatically using
the broadcaster data but can be advanced or
decreased by from -12 to +13 hours using Time
Zone in Time Setup. (See page 34)
PLEASE NOTE
The Factory Default
menu can also be accessed at any
time in the Parental control from the SETUP menu.