Operation Manual

English
20
TUNING THE TELEVISION
Setting the programmes
NOTE: When Channel Block is activated the
4-digit password is needed to enter the Channels
submenu under SETUP menu.
Auto Scan
The Auto Scan will completely re-tune the
television and can be used to update the channel
list.
It is recommended that Auto Scan is run
periodically to ensure that all new services
are added.
NOTE: All the current programmes and settings
i.e. the locked programmes, will be lost.
Press MENU and press ◄ or ► to select
SETUP.
Country
OSD Language
Channels
Automatic Power Down
Location
Software Upgrade
SETUP
Reset TV
Home
On
English
United Kingdom
Select Back Exit
EXIT
Enter
OK RETURN
Parental
Press ▼ to highlight Country and press ◄
or ► to select.
NOTE: In order to receive the information from
the broadcaster correctly, please set the correct
country.
Press ▼ to highlight OSD Language and
press ◄ or ► to select.
4
Press ▼ to highlight Channels and press
► or to enter.
Country
OSD Language
Channels
Automatic Power Down
Location
Software Upgrade
SETUP
Reset TV
Home
English
United Kingdom
Select Back Exit
EXIT
Enter
OK RETURN
Parental
On
Select Auto Scan and press .
Auto Scan
Update Scan
Analogue Manual Scan
Favorite Network Select
Channel Skip
Channel Sort
Channels
Channel Decode
Analogue Channel Fine Tune
Clean Channel List
Select Back Exit
EXIT
Scan
OK RETURN
Channel Edit
Press Cancel for no change, or press to
enter Auto start screen.
Previous settings will be lost ! Press Cancel for
no change, Press OK to start Auto scan.
OK Cancel
For Country option of Finland, Germany,
Switzerland, Norway, Sweden or Others,
the Scan Mode option will be available if
the Tuner Mode in SETUP menu is set to
Cable.
• Scan Mode: The options are Full, Quick,
and Advance. The Quick scan is a
simplified version of the Full scan designed
to complete in less time, and is available for
Country option of Finland or Others only.
Auto Scan
Exit
EXIT
Scan All Channels.
0%
End Frequency (KHz) 362000
6900
100
362000
Modulation
Symbol Rate (Ksym/s)
Network ID
Scan
Scan Mode
Start Frequency (KHz)
Advance
Auto
Select
NOTE: The options Start Frequency, End
Frequency, Modulation, Symbol Rate, and
Network ID is available for Advance mode only.
Press ▲ or ▼ to highlight Scan and press
► or to start scanning. Press RETURN
to cancel, or press EXIT to stop scanning.