Operation Manual

English
21
TUNING THE TELEVISION
Update Scan
Search the new channels that are not in the
programme list.
Press MENU and press ◄ or ► to select
SETUP.
Press ▼ to highlight Channels and press
► or .
Select Update Scan and press to start
scanning.
Update Scan
Cancel Exit
EXITRETURN
Status: Scanning..
Digital Channels: 0 Analogue Channels: 0
0%
NOTE: This option is available for DVB_T only.
Single RF Scan
Scan single RF channels. You can check the
Signal Strength and the Signal Quality.
Select Channels from the SETUP menu.
Highlight Single RF Scan and press ► or
to enter.
Press ◄ and ► to select the RF Channel,
then press to start scanning.
0
Single RF Scan
BackScan Exit
EXITOK RETURN
Scan single RF channel. (Digital Only)
Start Frequency (KHz)
Modulation
Symbol Rate (Ksym/s)
474000
6875
Auto
Signal Strength
0%
NOTE: This option is available for DVB_C and
DVB_T only.
Favorite Network Select
If there are more than two networks detected
after running the Auto Scan in Channels menu,
you can select the network you prefer.
Select Channels from the SETUP menu.
Highlight Favorite Network Select and
press ► or to enter.
Auto Scan
Update Scan
Single RF Scan
Favorite Network Select
Channel Skip
Channel Sort
Channels
Clean Channel List
Select Back Exit
EXIT
Enter
OK RETURN
Channel Edit
Press ▲ or ▼ to select the network you
prefer, and then press to set.
Please select your favorite network:
TVBS Network
Oslo og Akershus
Favorite Network Select
Exit
EXIT
Select
OK
NOTE: This feature is available only for the
Country option of Norway, and with DVB_T
input source.
Analogue Manual Scan
The television can be tuned-in manually using
Analogue Manual Scan. For example: if the
television cannot be connected to a media
recorder/decoder with a SCART lead or to tune-in
a station on another System.
Press MENU and press ◄ or ► to select
SETUP.
Press ▼ to highlight Channels and press
► or .