Operation Manual

English
36
CONTROLS AND FEATURES
Input signal selection
This species the type of signal going into SCART
on the back of the television. Please refer to the
manufacturers instructions for the connected
equipment.
In the SETUP menu, press ▼ to highlight
SCART, then press ► or to enter.
OSD Language
SCART
Automatic Power Down
Location
Software Upgrade
SETUP
Reset TV
Home
On
English
Select Back Exit
EXIT
Enter
OK RETURN
Parental
Model 19/22:
Press ◄ or ► to select Auto, Mixed,
RGB, Composite, or S-Video.
SCART
Select Back Exit
EXITRETURN
SCART Auto
Model 26/32/40:
• Press ▲ or ▼ to select SCART 1 and
press ◄ or ► to select Auto, Mixed, RGB,
Composite, or S-Video.
• Press ▲ or ▼ to select SCRAT 2 and
press ◄ or ► to select Auto, Composite,
or S-Video.
SCART
Select Back Exit
EXITRETURN
SCART 1
SCART 2
Auto
Auto
Check the signal output of the DVD or compatible
device, please select the correct setting for
“SCART input”.
REGZA-LINK Controls
This feature uses CEC (Consumer Electronics
Control) technology, and allows the control of
Toshiba REGZA-LINK compatible equipment
from the television’s remote control.
NOTE: Not all Toshiba products currently support
REGZA-LINK.
Equipment Control
The REGZA-LINK mode on the television’s
remote control allows the control of connected
REGZA-LINK equipment being watched.
To control the REGZA-LINK input source, rst
select the equipment with REGZA-LINK input
source selection, then switch the mode on the
remote control to REGZA-LINK and press any
buttons.
The available functions are dependent on the
equipment connected. Not all the remote control
keys may be available. Please refer to the
operation manual for each piece of equipment
connected.
NOTE: The television features that can be
controlled by the connected equipment are:
Standby, Volume, Channel, Sound Mute, Display
Information, Number Buttons and Previous
Programme.