Operation Manual

English
37
CONTROLS AND FEATURES
Input Source Selection
When any equipment using CEC technology is
connected, the REGZA-LINK icon will appear
in the input source list allowing selection of
individual devices.
Press . A list will appear on screen
showing modes and all stored external
equipment.
Main
TV
1
2
3
HDMI 1
HDMI 2
HDMI 3
PC
4C
NOTE: The "HDMI 3" port is available for model
32/40LV71*B only.
The REGZA-LINK icon appears
automatically after detected with REGZA-
LINK compatible equipment. Press ▼ to
highlight the input source shown with the
REGZA-LINK icon.
TV
1
2
3
HDMI 1
HDMI 2
REGZA-LINK
HDMI 3
PC
4C
Main
Press ►. A second selection screen will
appear showing all connected REGZA-
LINK equipment.
4
Press ▲ or ▼ to highlight an input source,
and then press to select.
NOTE 1: When the television is switched on,
it will take a few minutes for the REGZA-LINK
icon to appear in the list, when an HDMI cable is
removed, it will take a few minutes for the logo to
disappear.
NOTE 2: If the HDMI cable from the connected
equipment is changed, or HDMI equipment
settings are changed, the Enable REGZA-LINK
in the REGZA-LINK setup menu may need to be
reset to On.
NOTE 3: When the REGZA-LINK input source
is selected, some REGZA-LINK equipment may
automatically switch on.
The following features are dependent on the
connected equipment. For operating information,
refer to the operation manual for all connected
equipment.
Pass-Through Control
The Pass-Through feature allows you to control
the connected REGZA-LINK device by the
television’s remote control.
Press ▲ or ▼ to select REGZA-LINK in
the Quick Access Menu, and then press
OK. The control panel will appear.
When there are two or more REGZA-LINK
devices connected to the television, a
device selection menu will appear. Highlight
the device you want to control, and then
press to select.
GUIDE EXIT
MENU
MENU
CONTENTSROOT TOP DVD
RETURN
Press the key on the television’s remote
control as guided by the control panel
shown.
NOTE: The available functions are dependent
on the connected equipment, not all the remote
functions may be available. Please refer to the
operation manual of the connected equipment.