All in One Printer User Manual
Table Of Contents
- Purpose of the Imaging Manual
- Table of Contents
- 1. General Adjustments – Copying, Printing and e-Filing (Output from Box)
- 1.1 To Obtain a Darker Image
- 1.2 To Adjust the Density on a Solid Colored Image
- 1.3 To Achieve the Image Quality Most Suitable for the Paper Used (To eliminate blur and graininess from an image)
- 1.4 To Minimize Variations in the Image Quality under the Operating Conditions (To optimally program image quality control)
- 1.5 To Correct Out-of-Registration Colors
- 2. Copier-specific Adjustments
- 2.1 To Copy Text Clearly (To eliminate faint, smudged or blurred text)
- 2.2 To Closely Match the Color Balance of the Original
- 2.3 To Improve the Reproducibility of Gray
- 2.4 To Copy in Vivid Colors
- 2.5 To Make the Pale Area of the Original Look Darker and Sharper (To improve the highlight reproducibility)
- 2.6 To Eliminate the Background Color
- 2.7 To Avoid Copying the Image Seen through the Back of a Page Printed on Thin Paper
- 2.8 To Eliminate Moiré
- 2.9 To Copy Sharply (To enhance sharpness)
- 2.10 To Make Photo Edges Look Softer
- 2.11 To Make Solid Filled Bold Text (Logo) Highly Colored
- 2.12 To Sharply Contrast the Hues of Highlighters on the Copy
- 2.13 To Obtain a Good Color Balance on Thick Paper
- 2.14 To Obtain Smooth Gray-Scale Photo Images
- 2.15 To Change the Threshold in Auto Color Mode (To change the threshold between the Full Color mode and the Black mode to meet the user’s needs)
- 2.16 To Adjust the Twin-Color Copy Image Quality
- 2.17 To Adjust the Image Quality Scanned from the RADF
- 2.18 To Program Frequently Used Copy Settings (To Use Custom Mode)
- 2.19 To Copy While Erasing Shadow Outside of Image
- 2.20 To Avoid Copying Blank Page of Original Scanned with RADF
- 2.21 To Obtain Image in Even Density Level
- 3. Printer-specific Adjustments
- Restrictions on Use of Printer Functions
- 3.1 To Maintain a Steady Color Balance
- 3.2 To Maintain a Steady Color Balance on Thick Paper or Special Paper
- 3.3 To Obtain the Desired Color Balance
- 3.4 To Closely Match the Color Balance on the Monitor
- 3.5 To Maintain a Uniform Gray Hue(To maintain Consistency in Gray among Text, Photos and Graphics)
- 3.6 To Use Only the Black Toner to Reproduce Gray Areas(To use only the black toner to reproduce black-and-white photos or gradational images)
- 3.7 To Easily Adjust the Overall Brightness
- 3.8 To Adjust the Overall Saturation
- 3.9 To Easily Adjust the Overall Contrast
- 3.10 To Obtain a Sharper Print Image
- 3.11 To Obtain a Softer Image
- 3.12 To Make Low-resolution Data Look Finer (To soften an image)
- 3.13 To Eliminate Smudges from Highly Colored Text and Lines (To prevent toner scattering around text and lines where a large amount of toner is used)
- 3.14 To Clearly Print Light-Colored Thin Lines or Text
- 3.15 To Make the Light-Colored Area Darker on the Printout
- 3.16 To Clearly Print Thin Lines/Double Lines
- 3.17 To Decrease the Image Density and Save Toner (To Print in the Toner Save Mode)
- 3.18 To Adjust the Image Density in the Toner Save Mode
- 3.19 To Print Illegible Gray or Colored Text in Black
- 3.20 To Ignore Blank Pages for Printing
- 3.21 To Sharply Print Black Text
- 3.22 To Prevent Dark Toner from Coming Off
- 3.23 To Register the Image Quality Adjusted Corresponding to a Preference(To use the Custom Color Settings)
- 3.24 To Print a Full-Color Original in Two Colors
- 3.25 To Use ICC Profile
- 3.25.1 To Create ICC Profiles for Printing on the Paper to be Used
- 3.25.2 To Print Precise Colors Using Existing RGB Source ICC Profiles
- 3.25.3 To Perform Simulated Printing with CMYK Inks of Each Ink Manufacturer
- 3.25.4 To Convert Colors with Specified Source ICC Profiles (Not Using Embedded ICC Profiles)
- 3.25.5 To Perform Further Adjustment After Using ICC Profiles
- 4. e-Filing-specific Adjustments
- 4.1 To Clearly Store a B/W Image in the Auto Color Mode
- 4.2 To Store an Original while Reducing the File Size
- 4.3 To Store a Color Photo Image, while Minimizing Moiré
- 4.4 To Match the Color Balance on the Original(To adjust the color balance in Print to Box)
- 4.5 To Scan and Print, while Minimizing Moiré
- 4.6 To Finely Print the Image Stored in the e-Filing box(To print images stored through Copy to Box or Print to Box)
- 4.7 To Store an Image Suitable for Displaying on the Monitor or Image Editing
- 4.8 To Finely Print Color Images Scanned and Stored(To print images stored through Scan to Box)
- 4.9 Appendix
- 5. Scanning-specific Adjustments
- 5.1 To Clearly Scan Text (To reduce noise around text)
- 5.2 To Scan an Original, while Eliminating the Background Color(To eliminate the background density)
- 5.3 To Clearly Scan and Print an Original in Black and White(To improve gradation and reduce graininess)
- 5.4 To Scan the Original, while Reducing the File Size
- 5.5 To Sharply Scan the Original (To increase the sharpness intensity)
- 5.6 To Scan an Original, while Enhancing Black
- 5.7 To Scan an Original with the Desired Gradation
- 5.8 To Register the Original Mode Optimal for a Particular Type of Original(To have "Custom" selected)
e-STUDIO5520C/6520C/6530C © 2008 TOSHIBA TEC CORPORATION All rights reserved
3-37
3. Printer-specific Adjustments
3.11 To Obtain a Softer Image
Before the adjustment After the adjustment
Unadjusted settings. A softer image is obtained.
Explanation
Decrease the sharpness intensity under the menu on the printer driver, in order to obtain a softer print image.
* The sharpness adjustment will have an effect particularly on photo images, such as BMP, GIF, JPEG and TIFF.