user manual

14
EN
ON timer and OFF timer
Setting the ON Timer
a ON button
Press the ON button. Set the timer to the desired time.
Each time the ON button is pressed, the time changes in ten minute increments.
Holding down the ON button changes the time in one hour increments.
b SET button
Press the SET button to set the timer.
The timer time is displayed, and the timer starts.
c CLR button
Press the CLR button to cancel the timer setting.
Setting OFF Timer
a OFF button
Press the OFF button.
Set the timer to the desired time.
Each time the OFF button is pressed, the time changes in ten minute increments.
Holding down the OFF button changes the time in one hour increments.
b SET button
Press the SET button to set the timer.
The timer time is displayed, and the timer starts.
c CLR button
Press the CLR button to cancel the timer setting.
.
Once you select timer operation mode, the settings are saved in the remote controller.
Thereafter, the air conditioner will start operating under the same conditions as you adjusted by the or button on the remote
controller.
You cannot set the timer when the clock display is flashing.
Follow the instructions in the section “Setting the clock” on page 7 to set the clock, and then set the timer.
TIMER OPERATION
CAUTION
• When you select timer operation, the remote controller automatically transmits the timer signal to the indoor unit at the
specified time. Therefore, keep the remote controller in a location where it can transmit the signal to the indoor unit
properly.
• If you do not press the SET button within 30 seconds after setting the time, the setting will be cancelled.
b
c
a
ON
ON
SET
SET
CLR
CLR
OFF
OFF
SET
SET
CLR
CLR
SET
ON
OFF