User guide

23
English
• [Color Space]
Select a predened Colour space of
picture.
{RGB} – Select RGB Colour space.
{YCbCr} – Select YCbCr Colour space.
{YCbCr422} – Select YCbCr422 Colour
space.
{Full RGB} – Select Full RGB Colour
space.
• [HDMI Deep Color]
This feature is available only when the
display device is connected by a HDMI
cable, and when it supports Deep
Colour feature.
{30 bits} – Output 30 bits Colour.
{36 bits} – Output 36 bits Colour.
{Off} – Output standard 24 bits Colour.
Note:
- When the colour space is "YCbCr422", even if
HDMI Deep Color is set to 30bits/36bits, it is not
output with Deep Colour.
• [HDMI 1080/24p]
{On} – Enable 1080/24p video
resolution setting.
{Off} – Disable 1080/24p video
resolution setting.
Notes about HDMI 1080/24p:
If you want the 1080/24p output, it should fulll
below 3 conditions:
1.TV supports the 1080/24p display;
2.Player choose the 1080/24p option in the setup
menu;
3.Media must be the 1080/24p video.
Notes:
- This resoluon becomes eecve only when
the playing Blu-ray Disc™ contents are Film
source.
- During HDMI 1080/24p playback, there will
be no composite output.
• [HDMI 3D]
Turn on or off the 3D function.
{Auto} – Opening the 3D function of
player.
{Off} – Turn off the 3D function.
When you play a side by side 3D disc,
which is a kind of 3D disc and it is make
up of two frames, the player will playback
this disc and export the content based on
the TV's settings. So if you want to do
some settings, such as OSC or program,
please ensure that the 3D TV's setting is
correct.
Note:
If you do some 3D TV's seng during 3D disc
playback, the TV screen may be abnormal. To
recover, load the 3D TV's default seng rst.
[Video Process]
TV
Video Adjust More...
Low
Video Process
Sharpness
Display Setting
SETUP
Exit
Move cursor key to select menu option
then use “OK ” key to select
• [Video Adjust]
Select a predened setting of the video.
1. Press OK.
2. Press/ to adjust the video
Brightness, Contrast, Hue and
Saturation.
{Brightness} - Press / to adjust
the brightness of display, goes left
means dark and right means bright.
{Contrast} - Press / to adjust the
contrast of display, goes left means low
contrast and right means high contrast.
{Hue} - Press / to adjust the Hue of
display, goes left means low hue and
right means high hue.
{Saturation} - Press / to adjust the
saturation of display, goes left
means low Saturation and right means
high saturation.
3. Press RETURN to exit.
Brightness
Contrast
Hue
Saturation
RETURN
ExitChange




• [Sharpness]
Select the level of sharpness: High,
Middle, Low.
{High} - Select High sharpness level.
{Middle} - Select Middle sharpness.
level.
{Low} - Select Low sharpness level.