User’s Manual CAMILEO X100
Introduction Welcome and thank you for choosing a TOSHIBA product. For your convenience, your TOSHIBA product is furnished with two guides: a) a Quick Start Guide, and b) this comprehensive PDF User’s Manual.
Contents Section 1 Getting to Know Your Camcorder......................................... 6 Overview................................................................................. 6 Check the Components......................................................... 6 Safety Instructions................................................................. 7 System Requirements........................................................... 7 Front View . ..................................................................
Contents Picture Effect........................................................................ 22 Section 4 Playback Mode..................................................................... 24 Button Function................................................................... 24 LCD Monitor Information..................................................... 25 Operations for Playback Mode .......................................... 27 Movie Playback..............................................................
Contents Section 11 Specifications .................................................................... 47 Section 12 Troubleshooting................................................................. 48 Section 13 Other Information............................................................... 49 TOSHIBA Support................................................................ 49 Operating Environment Conditions................................... 49 Regulatory Information.......................................
Section 1 Getting to Know Your Camcorder Overview The camcorder with 10 Mega Pixel sensor can take H.264 movies. By way of using H.264 technology, more videos can be taken within certain amount of memory. High quality images with up to 16 megapixels can also be delivered smoothly. With a color LCD monitor, users can compose images and examine them easily. The camcorder features 3” LCD touch panel which is an ideal platform for you to operate your camcorder.
Safety Instructions 1. Do not drop, puncture or disassemble the camcorder; otherwise the warranty will be voided. 2. Avoid all contact with water, and dry hands before using. 3. Do not expose the camcorder to high temperature or leave it in direct sunlight. Doing so may damage the camcorder. 4. Use the camcorder with care. Avoid pressing hard on the camcorder body. 5. For your own safety, avoid using the camcorder when there is a storm or lightning. 6. Do not use batteries of different specifications.
Front View Tele/Wide Button Speaker Flash Microphone Lens Rear View Movie Mode LED Indicator Playback LED Indicator Picture Mode LED Indicator Playback Button Mode Button Rolling Wheel OK Button 8 EN
Side View LCD Touch Panel SD card Slot Power Button Pre -Record/YouTube Direct Button Mini USB 2.
Section 2 Getting Started Loading the Battery Before using the camcorder, users must load the Lithiumion rechargeable battery come within the package. 1. Slide the safety latch to the unlocked position and open the battery cover. 2. Insert the battery according to the correct polarity marks ( + or -). 3. Close the battery cover firmly, and slide the safety latch to the locked position. Note Please remove the insulator on battery connection before use.
Turning the Camcorder On and Getting Started • To turn on the camcorder: 1. Flip out the LCD panel; the camcorder will turn on automatically. 2. Or press Power Button for one second to turn it on. • To record movies: Press Mode Button or touch mode .(The Movie Mode LED Indicator on the screen to switch to the Movie Record will light up.) Press OK Button to record movies. on the screen to switch to the Picture Record • To take a picture: Press Mode Button or touch mode.
Section 3 Record Mode Button Function Rolling Wheel: Rotate to move between the wheel menu options. Right Button: LCD Information ON/OFF. In Record menu, press to switch to the submenu. Left Button: Flash Auto/Red-Eye-Reduction/Digital Light/ Flash OFF. In Record menu, press to return to the main menu. Up Button: Move between the option items. Down Button: Delete the current or all movies/pictures. Move between the option items. OK Button: 1. Validate the setting. 2.
LCD Monitor Information The indicators shown below may display on LCD when movies and pictures are recorded: Movie Resolution FHD (1080i 60) FHD (1080p 30) HD (720p 60) HD (720p 30) (1) VGA (4:3) Slow Motion (Record movies at 320x240 resolution.
Scene Skin (6) Night Backlight (7) Macro Position Focusing (8) Manual White Balance (9) Motion Detection Zoom meter: (10) 1X~100X (10X Optical zoom and 10X Digital zoom) (11) Record Menu (12) Playback Mode (13) Movie/Picture Record Mode Movie Mode Digital Light Picture Mode Flash Auto (14) Red Eye Reduction Digital Light Flash Off (15) SD Card Inserted Battery: full power Battery: medium power (16) Battery: low power Battery: empty power DC power mode Note Scene: B/W / Classic / Negat
Movie Recording • In Movie Record Mode (The Movie Mode LED Indicator lights up), press OK Button to start recording. When a movie is being recorded, a time indicator will display on the LCD monitor. To stop recording, press OK Button again. • Optional function 1. Dual record: press Mode Button ( ) to capture the image. The Dual record icon( ) appears on the LCD monitor. • Press Playback Button to view the recorded movies.
Picture Recording • In Picture Record Mode (The Picture Mode LED Indicator lights up), press OK Button halfway down until the focusing frame turns from white to green. Then, press it fully down to take a picture. • Press Playback Button to view the picture.
Options for Record Menu Movie Record Mode Menu Movie Resolution • • • • • FHD (1080i 60) FHD (1080p 30) HD (720p 60) HD (720p 30) VGA (4:3) White Balance • • • • Auto Daylight Fluorescent Tungsten Scene • • • • • • • Auto Skin Night Backlight B/W (Black/White) Classic Negative Effect • Stabilization • Macro Mode • Motion Detect.
Movie Resolution Five resolution settings are available. • • • • • FHD(1080i 60): Record movies at 1920x1080i 60 resolution. FHD(1080p 30): Record movies at 1920x1080p 30 resolution. HD(720p 60): Record movies at 1280x720p 60 resolution. HD(720p 30): Record movies at 1280x720p 30 resolution. VGA(4:3): Record movies at 640x480p 30 resolution. Operation 1. In Movie Record Mode, touch Display Screen (on-screen icon) to show the wheel menu. 2. Scroll and stop on [Resolution].
White Balance The camcorder adjusts the color balance of images automatically. Three manual white balance settings are available: • Auto: The camcorder automatically adjusts white balance. • Daylight: Under outdoor condition. • Fluorescent: Under fluorescent light condition. • Tungsten: Under tungsten light condition. Operation 1. In Movie/Picture Record Mode, touch Display Screen (on- screen icon) to show the wheel menu. 2. Scroll and stop on [White Balance]. The submenu of White Balance pops up. 3.
Movie Effect Operation 1. In Movie Record Mode, touch Display Screen (on-screen icon) to show the wheel menu. 2. Scroll and stop on [Effect]. The submenu of Effect pops up. 3. Touch the desired Effect option to enter its option screen. 4. The Movie Effect submenu contains 5 options-Stabilization, Macro Mode, Motion Detection, Slow Motion, and Time Lapse --for you to adjust the camcorder’s settings. Stabilization Record with an effect of reducing camcorder shake to result in more stable videos.
Motion Detection Record videos automatically when the camcorder detects a movement. Operation Display Screen 1. In the Effect submenu, touch [Motion Detect.] to enter the option screen. 2. Touch the desired option. 3. Touch [OK] to validate the setting. 4. Camcorder will start to record video automatically if it detects a movement. Stop recording if it does not detect a movement. Slow Motion Record videos with slow motion effect.
Picture Effect Operation 1. In Picture Record Mode, touch Display Screen (on-screen icon) to show the wheel menu. 2. Scroll and stop on [Effect]. The submenu of Effect pops up. 3. Touch the desired Effect option to enter its option screen. 4. The Picture Effect submenu contains 3 options --Self Timer, Macro Mode, and ISO-- for you to adjust the camcorder’s setting. Self-Timer The self-timer allows you to take pictures with a ten-second time delay.
ISO The camcorder adjusts the ISO sensitivity of its images automatically. Three manual ISO sensitivity settings are available. (800/1600/3200) The larger the number is, the higher the ISO sensitivity is set to. Select a small number to shoot a smoother image. Select a large number to shoot an image in a dark location or to shoot a subject moving at high speed. Operation Display Screen 1. In the Effect submenu, touch [ISO] to enter the option screen. 2. Touch the desired option. 3.
Section 4 Playback Mode Button Function The Buttons have the following functions in Playback Mode. Rolling Wheel: Rotate to move to the previous/next movie/ picture. Right Button: LCD Information ON/OFF; Fast forward. Left Button: Fast rewind. Down Button: Delete the current movie/picture or all movies/ pictures. OK Button: 1. Enter Movie/Picture Playback Mode. 2. Validate the setting. 3. In Picture Playback Mode, press to start/stop the slideshow.
LCD Monitor Information Indicators on the LCD screen while in Playback Mode: Playback Preview Screen Movie Playback Mode Picture Playback Mode Movie Resolution FHD (1080i 60) FHD (1080p 30) HD (720p 60) HD (720p 30) VGA (4:3) (1) Slow Motion (320x240) Picture Resolution High (16MP) Standard (10MP) Low (3MP) Dual Record (The image resolution captured during movies recording is the same as the video resolution.
(2) 0003/0005 Current number/ Total number of picture/movie.
Operations for Playback Mode The Playback Mode is for viewing and managing movies and pictures on the built-in memory or on an SD Card. Operation Display Screen ) or press 1. Press Playback Button ( screen to switch to the Playback mode. on the 2. In the Playback preview screen, press Mode Button or touch on the screen to switch between the Movie mode and the Picture mode. 3. Sweep to the left to go to the previous picture/movie; sweep to the right to go to the next picture/movie. 4.
Delete Movies Operation 1. Touch Display Screen to go to the Delete option screen. 2. Touch [Yes] to delete the current movie or [No] to cancel the operation and to exit; touch [All] to delete all movies. 3. Before all movies are about to be deleted, a confirmation screen will appear; touch [Yes] to execute the operation and [No] to cancel the operation. Note • If a memory card has been inserted, you can only delete those movies stored on the card.
Picture Playback Operation Display Screen 1. When in the Picture Playback mode, sweep to to go to the previous the right or touch picture; sweep to the left or touch to go to the next picture. 2. While the picture is selected, press on the screen as well as go up to enter Magnification Mode.( The magnification Indicator appears on the screen) 3. In the Magnification Mode, sweep to the top to zoom in or to the bottom to zoom out. 4. To navigate the magnified picture, press on the screen and move as well.
Delete Picture Operation 1. Touch Display Screen to go to the Delete option screen. 2. Touch [Yes] to delete the current picture or [No] to cancel the operation and to exit; touch [All] to delete all pictures. 3. Before all pictures are deleted, a confirmation screen will appear; touch [Yes] to execute the operation and [No] to cancel the operation. Note • If a memory card has been inserted, you can only delete those pictures stored on the card.
Section 5 Setting Your Camcorder Setting Menu Operation Display Screen 1. Touch (on-screen icon) when in Record Mode. The Record wheel menu will show on the screen. 2. Scroll and stop on [Setting]. The submenu of Setting pops up. 3. The Setting submenu contains 6 options for configuring your camcorder setup. They are Sound (operation sound), TV, Language, Time Setting, Format, and Default Setting. 4. Touch / on the screen to change between the pages.
TV Ensure that the appropriate TV standard of your area is selected – either NTSC or PAL. Wrong TV system setting may cause image flickers. • NTSC(60Hz): USA, Canada, Japan, South Korea and Taiwan, etc. • PAL(50Hz): UK, Europe, China, Australia, Singapore and Hong Kong, etc. Operation Display Screen 1. In the Setting submenu, touch [TV] to enter the option screen. 2. Touch the desired option. 3. Touch [OK] to validate the setting. Language Use this option to select the language of the user interface.
Time Setting Operation Display Screen 1. In the Setting submenu, touch [Time Setting] on the screen to go to the Time Setting menu. 2. Touch Year, Month, Day, Hour, or Minute to set. 3. Adjust the numeric value by touching / . 4. Touch [OK] to validate the settings. Format Yes: Format the built-in memory ( When there is no SD card in the camcorder ) / SD Card (When there is an SD card in the camcorder).
Default Setting To restore the default factory setting, select this option. Operation Display Screen 1. In the Setting submenu, touch [Default Setting] on the screen to go to the Default Setting confirmation screen. 2. Touch [Yes] to execute the operation and [No] to cancel the operation.
Section 6 Viewing Pictures and Movies on TV Connecting to a High-Definition 16:9(Wide) TV 1. Connect the HDMI cable to your camcorder’s HDMI Out port. 2. Connect the other end of the cable to a television. 3. Set the video input source of your TV to “ HDMI.” (16:9) 4. Use the buttons to view the stored pictures and movies on the TV. Operation On TV 1. Press OK Button to play movies and press it again to pause. 2.
Section 7 Viewing Pictures and Movies on PC Installing Bundled Software The CD-ROM supplied with this camcorder contains 3 pieces of software. • ArcSoft MediaImpression is a user-friendly application that helps you managing your media, burning your video into DVD, and uploading your videos to YouTube easily. • ArcSoft MediaConverter is a powerful application that converts multiple video formats into compatible format with your camcorder.
Section 8 Burning the Recorded Clip into a DVD The bundled software CD contains ArcSoft MediaImpression which can be used to burn movie clips onto a DVD. You can share this DVD movie with your family or friends by using a regular DVD player. To create a DVD: 1. Install ArcSoft MediaImpression (Refer to Section 7). 2. Click on Windows [ Start ] g[ (All) Programs ] g[ ArcSoft MediaImpression ]. 3. The ArcSoft MediaImpression main screen will appear on your desktop. 4. Click on [ Videos ] .
5. The operation screen will appear: • Select the folder that contains the video files you want to burn. • Select the files in the display area. • Click on [Make Movie] at the bottom menu. 6. Click on [Add Media] ( ) to add the files into slide. 7. Click on [Save/Share].
8. Select [ Burn ] and click on [ Next ] to proceed. 9. Click on [ Start ] to start the VCD/DVD burning. Note Please insert a blank, writable VCD or DVD into the CD/DVD Writer before clicking on [Start].
Section 9 Uploading Video Files to YouTube The built-in YouTube Direct application offers you an easy way to upload your video clips to YouTube instantly. It helps you share them with your family and friends on the YouTube website. Also, the bundled software, ArcSoft MediaImpression, can be used to upload your video clips to YouTube. 9.1 YouTube Direct To upload video files marked with to YouTube: 1. Select the video clips in Movie Playback Mode by pressing YouTube Direct Button . 2.
4. Upload video clips: 1. Press YouTube Direct Button on the camcorder again. 2. The videos clips marked with will be uploaded to the website automatically. (You may be asked to fill in your account information before uploading or you can fill in the information firstly by click on ) 3. Click on “ CANCEL” to stop uploading. To upload video files selected manually to YouTube: 1. Follow the step 2 and 3 on page 40. 2. On the thumbnail screen, click on the up/down icon to change the pages.
To playback the video file: 1.Double click on the video clip on the thumbnail screen. 2.Click on the Play/Pause icon to play/pause. Click on the Return icon to return to the thumbnail preview screen. To setup your account information for YouTube: 1. Click on to go to the setup screen. 2. Fill in your account information in the blanks. Then click on “Save”. (If you do not have a account, please sign up on YouTube first.
9.2 ArcSoft MediaImpression To upload video files to YouTube: 1. Install ArcSoft MediaImpression (Refer to Section 7). 2. Click on Windows [ Start ] g[ (All) Programs ] g[ ArcSoft MediaImpression ]. 3. The ArcSoft MediaImpression main screen will appear on your desktop. 4. Click on [ Videos ] . 5. The operation screen will appear: • Select the folder that contains the video files you want to upload. • Select the files in the display area. • Click on [Upload to YouTube] at the bottom menu.
6. Fill in your YouTube account information in the blanks, and then click on [Login] 7.
Section 10 Video File Converter The bundled software CD contains ArcSoft MediaConverter that features video file converter to convert multiple video formats into compatible format with your camcorder. In this way, you can convert various video files formats and playback your favorite movies on your camcorder. To convert a video file: 1. Install ArcSoft MediaConverter ( Refer to section 7). 2. Click on Windows [ Start ] g[ (All) Programs ] g[ ArcSoft MediaConverter ]. 3.
5. Select the video file you want to convert. Then, click on [Open] to convert the file. 6. The converted files will be renamed “ IMAG0001.avi”, “ IMAG0002.avi”,and so on. 7. Rename the converted file to “ IMAGXXXX. avi” before transferring the converted file to your camcorder. (XXXX should be a four figures,e.g. 0001 to 9999) (Please note that the converted file names can not be the same as the ones having existed in your camcorder, otherwise the video files in your camcorder may be overwritten.) 8.
Section 11 Specifications Specification Image sensor 10 Mega pixel CMOS sensor Operation modes Movie record, Picture record Lens Wide: F2.0 ~ 5.6 Tele: F2.8 ~ 7.8 Focus range Macro mode: wide:1cm~Infinite( 0.39 inch ~infinit) , tele:60cm~Infinite( 23.4 inch ~infinit) Auto mode: wide:10cm~Infinite( 3.9 inch ~ infinite) , tele:100cm~Infinite( 39 inch ~ infinite) Zoom 1X~100X (10X Optical zoom and 10X Digital zoom) Shutter Electronic LCD monitor 3”/ 7.
Section 12 Troubleshooting Troubleshooting 111 If the LCD preview is not clear while shooting, how can the focus be adjusted? Try to switch between Macro and Auto Mode. 222 The flash is not working. The battery power is low. The camcorder is in DC power mode. 333 The files on the memory card do not display smoothly when the LCD shows the “!” marking. The “!” means the SD card is low speed or is having wrong content inside.
Section 13 Other Information TOSHIBA Support Need help? For the latest driver updates, user’s manuals & FAQ’s please have a look at the TOSHIBA options & services support page: computers.toshiba.eu/options-support Please see computers.toshiba.eu/options-warranty for the TOSHIBA hotline numbers.
of this product due to possible strong electromagnetic fields especially near to big machinery or power units. Medical environment: The compliance to the Medical Product Directive has not been verified by Toshiba, therefore this product cannot be used as a medical product without further verification. The use in usual office environments e.g. in hospitals should be no problem if there is no restriction by the responsible administration.
Disposal of batteries and/or accumulators The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed of separately from household waste. If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the Battery Directive (2006/66/EC), then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.
0970T9360L-A01S 73 52 For more information, please visit: www.toshiba-multimedia.