ON-LINE MANUAL 24D143*DB / 24W143*DB / 24D343*DB LED Backlight LCD TV During the life of your TV firmware updates will be made available to ensure that your TV maintains optimum performance. You can download the latest version of firmware from www.toshiba-om.net/firmware.php Some features listed in this document are limited due to local legislation and may not be available in all countries. “Register your TV online at: www.toshiba-europe.
Get started with Freeview Freeview gives you over 50 TV channels to play with, not to mention 25 radio stations. Start watching all your favourite TV content today, just connect your aerial and tune in. Keep up-to-date New channels are launched on Freeview from time to time along with other updates to the service. So it pays to retune your digital TV periodically to make sure your Digital TV/Radio channels are up to date. To retune your Toshiba Digital TV, please refer to the Re-tune section for guidance.
Contents English Viewing Channel List......................................... 20 Moving a Channel.............................................. 20 Deleting a Channel............................................ 20 Renaming a Channel......................................... 20 Locking a Channel............................................. 20 Viewing Info Banner, Electronic Programme Guide..................................................................... 21 Viewing Info Banner.............................
English Language........................................................... 29 Parental............................................................. 29 Timers................................................................ 29 Date/Time.......................................................... 29 Sources............................................................. 29 Network Settings............................................... 29 Other Settings....................................................
Safety Precautions Air Circulation Do not Leave more than 10cm around all edges when wall mounting the television to allow adequate ventilation. This will prevent overheating and possible damage to the television. Dusty places should also be avoided. DON’T remove any fixed cover as this may expose dangerous voltages. Heat Damage Damage may occur if the television is left in direct sunlight or near a heater.
Installation and Important Information English Where to install * Button and stand style is dependent on model. Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV on a stable, level surface that can support the weight of the TV.
Important safety information • Even if the television conforms to the required DVB - T/C specifications, the compatibility with future digital DVB - T/C transmissions is not guaranteed. • Some digital television functions may not be available in certain countries. • The DVB - T/C system present in this device, allows reception of both FTA (Free To Air) and Encrypted channels. Note; Encrypted channels require a specific encryption system to view, which may not be available in certain countries.
Fitting or Removing the pedestal stand English Fitting or Removing the pedestal stand (1) Carefully lay the front of the unit face down on a flat, cushioned surface with the stand hanging over the edge. (2) To fit the stand use the screws supplied. or (3) Remove the screws fixing the pedestal stand (4) After the screws are removed, hold the pedestal stand in place,then remove the pedestal stand and the plastic moulding from the TV.
The Remote Control (TV - DVD) (RC1910) Simple at-a-glance reference of your remote control. SCREEN FAV LANG. SWAP SOURCE 2. Image size 21. Picture mode selection 3. Sleep Timer 22. No function 4. Mono/Stereo - Dual I-II / Current Language (in DVB channels) Language selection (Set language) 23. Teletext / Mix (in TXT mode) DISP. 5. No function 6. Numeric buttons Numeric buttons 7. Electronic programme guide(in DVB channels) 8. No function 9. Media Browser Angle 10.
The Remote Control (TV - DVD) (RC4826) Simple at-a-glance reference of your remote control. English 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
Connecting External Equipment Before connecting any external equipment, remove the mains plug from the wall socket. English (*) Number of these inputs may change according to the model of your TV. (**) LAN Socket available if Your TV supports LAN Home Networks.. Before running first time installation, any connected devices need to be set to standby mode. HDMI® (High-Definition Multimedia Interface) is for using with a DVD decoder or other equipment with digital audio and video output.
Connecting an HDMI® or DVI Device to the HDMI Input English The HDMI input on your TV receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device such as a set-top box or DVD player with HDMI or DVI output. NOTE: Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.
Connecting a home network (If TV is equipped with a LAN Port.) English The LAN port allows your TV to connect to your home network. You can use this networking system to access photo, video and audio files that are stored on a media server and play/display them on your TV. Note: Wireless USB LAN adaptor can be purchased from the retail outlet or Toshiba service company. You can find the phone numbers of the local services on the back cover of this manual.
Connecting a Computer Connecting a USB Memory English To Connect a Computer To Connect a USB Flash Drive With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the TV and hear the sound from the TV’s speakers. • You can connect a USB Flash Drive to your TV by using the USB input of the TV. This feature allows you to display/play music, photo or video files stored in a USB stick. • It is possible that certain types of USB devices (e.g.
Power Save Mode You can use Power Save Mode setting, located in the Picture Settings menu. If you set Power Save Mode as Eco, the TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum level. Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode. If pressed Right button, “Screen will be off in 15 seconds.” message will be displayed on the screen. Select Proceed and press OK to turn the screen off immediately.
Controlling the TV English Whilst all the necessary adjustments and controls for the TV are made using the remote control, the menu wheel on the left side of the TV may be used for some functions. Switching on If the standby LED is unlit, check that the mains plug is connected to the power and press the middle of required choice. Follow the on screen instructions. The functions of each menu are described in detail throughout the manual. the button on the left side of the TV to switch the television on.
Initial Installation IMPORTANT: Ensure that the aerial is connected and a Common Interface module is not inserted before switching on the TV for the first time installation. 1. Connect the mains plug and switch the TV on using the / I button. If the TV does not switch on, press any numbered or button on the remote control, then the language selection menu will be displayed. This screen will appear the first time that the TV is switched on and each time the TV is reset.
Initial Installation - continued English After the available stations are stored, Edit Channel List will be displayed on the screen. 9. You can select Network, Frequency, Network ID and Search Step from this screen. For highlighting lines you see, use Up or Down button. You can set Search Step as 8000 kHz or 1000 kHz. If you select 1000 kHz, the TV will perform search process in a detailed way. Searching duration will thus increase accordingly. When finished, press OK button to start automatic search.
Auto Tuning English Auto Tuning As new services are broadcast, it will be necessary to retune the television in order to view them. button to cancel the process. In such a case, located channels are not stored. • It is recommended to run Auto Tuning periodically to ensure that all new services are added. Please be aware that Auto Tuning will completely retune the television and all current channels and settings will be lost.
Manual Tuning, Analogue Fine Tuning The television can be tuned-in manually using Manual Search feature. English Digital Aerial Manual Search Analogue Manual Search The feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known. • Select Manual channel scan from the Install and Retune menu and press OK. Only if an analogue signal or Service is available. The television can be tuned-in manually.
General Operation English Stereo and Bilingual Transmissions Standby Notifications If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time positions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear. If the TV switches off while in No Signal mode, the following on-screen message will be displayed on the next switch-on: Stereo… Press “LANG - ” to select Stereo or Mono.
Channel List, Sorting Programmes, Programme Locking You can view stored channels and sort them by using the Channel List feature. English Viewing Channel List The channel order may be changed to suit your personal preference. • Select Channel List from the main menu and press OK button. The following menu will be displayed: • Select Edit Channel List to manage all stored channels. Use Up or Down and OK buttons to select Edit Channel List. • Selected channel is now moved.
Viewing Info Banner, Electronic Programme Guide English Viewing Info Banner • Press SUBTITLE button to sort channels by a genre. • Press“INFO - ” button. The information screen will appear giving details of the channel and programme currently being viewed. • For information on a highlighted programme, press i button. • Whenever you change channel, the TV displays the broadcast picture along with an information banner at the bottom of the screen. This will remain on the screen for a few seconds.
Language Selection English Language Settings Using this menu you can adjust the preferred language settings. • Press MENU button and select Settings by using Left or Right button. • Select Language and press OK to view this menu. Select the desired language by using Left or Right button. Press the MENU button on the remote control to exit. Preferred These settings will be used if available. Otherwise the current settings will be used. Audio: By pressing Left or Right button change the audio language.
Digital Settings - Parental Control, Menu Lock, Set PIN You can view or set parental preferences of your TV. English Viewing Parental Control Menu Maturity Lock (*) Press MENU button and select the Settings by using Left or Right button. Press OK button to view Settings menu. Use Up or Down button to highlight Parental and press OK to continue: When set, this option gets the maturity information from the broadcast and if this maturity level is disabled, disables access to the broadcast.
Configuring Picture Settings You can configure picture settings of your TV by using Picture Settings menu. English Configuring Picture Settings Sharpness You can use different picture settings in detail. You can customize current picture mode settings as desired. For example, you can change items such as, Brightness, Contrast, Colour and Sharpness. Sets the sharpness value for the objects displayed on the screen. Press Left or Right button to adjust the sharpness.
Configuring Picture Settings - continued English Film Mode (optional): Films are recorded at a different number of frames per second to normal television programmes. Press Left or Right button to set this feature to Auto or Off. Turn this feature to Auto when you are watching films to see the fast motion scenes clearly. Skin Tone: Adjust the desired skin tone. Colour Shift: Adjust the desired colour tone. RGB Gain: Press OK button to edit RGB gain.
Changing Picture Format English Press “SCREEN ” button repeatedly to select between Auto(*), Full(**), 16:9, Subtitle, 14:9, 14:9 Zoom, 4:3 or Cinema. Note: Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public display or commercial gain may infringe on copyright laws. Note: You can shift to screen up or down by pressing “ ”/“ ” buttons while picture zoom is selected as 14:9 Zoom, Cinema or Subtitle.
Configuring PC Picture Settings English PC Picture Settings (*) Press Left or Right button to adjust the value. (*) While in VGA/PC mode, some sections in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in VGA/ PC mode. PC Picture controls Contrast, Brightness and Colour adjustments in this menu are identical to adjustments defined in TV picture menu. Select Reset and press OK button to reset the adjustments.
Configuring Sound Settings You can configure sound settings of your TV by using Sound Settings menu. English Configuring Sound Settings Balance (Only for speaker) Sound settings can be configured according to your personal preferences. This setting is used for emphasizing left or right speaker balance. Press MENU button and select Sound by using Left or Right button. Press OK button to view Sound Settings menu. • Press Left or Right button to change the level of the balance.
Settings Menu Operation, Conditional Access English Configuring Your TV’s Settings Other Settings Detailed settings can be configured to suit your personal preferences. Viewing Settings Menu Press MENU button and select Settings by using Left or Right button. Press OK button to view Settings menu. Displays other setting options of the TV set. Netflix Netflix is a provider of on-demand internet streaming media. Press Up or Down button to highlight Netflix. Press OK button to proceed.
Setting Timers, Setting Date/Time English Timers Editing a Timer To view Timers menu, press MENU button and select Settings by using Left or Right button. Press OK button to view Settings menu. Use Up or Down button to highlight Timers and press OK to continue: • Select the timer you want to edit by pressing Up or Down button. Setting Sleep Timer The television can be set to turn itself off after a certain length of time. • Highlight Sleep Timer by using Up or Down button.
Source Settings, Other Controls English Configuring Source Settings Configuring Other Settings - General You can enable or disable selected source options. The TV will not switch to the disabled source options when the “SOURCE - ” button is pressed. You can configure the settings of your TV. Select Settings from main menu and press OK to view the Settings menu. Press the MENU button on the remote control to exit.
Other Controls - continued English Blue Background If the signal is weak or absent, the TV can automatically change to a blue screen. To enable this, set Blue Background to On from. • The Other Settings menu, Background and select On or Off using Left or Right button. Software Upgrade This feature helps to keep your TV updated. It works automatically and searches for new information when available and selected.
Other Controls - continued English CEC This function allows to control the connected HDMICEC compatible devices with the remote control of the TV. Select the HDMI input of the connected device from the source menu. The TV remote is automatically able to control most functions of the device (navigate menus, change channels, launch the disc etc.). To disable this feature hold the “0-Zero” button on the remote control for 3 seconds.
Network Settings, Portal, Internet Browser and YouTube English (If TV is equipped with a LAN port.) Configuring Network Settings Press the MENU button to open the main TV menu. Highlight Settings by pressing Left or Right buttons and press OK to enter. Highlight Network Settings and press OK. While Network Type is highlighted, press Left or Right buttons to select connection type. Press OK to enable the connection.
Network Settings, Portal, Internet Browser and YouTube continued English Press the EXIT button to close the portal and watch TV again. NOTES: • The virtual keyboard or numeric buttons on the remote, which are assosiated with the letters of the alphabet, can be used for entries. • The browser does not support multiple tabs. • Some internet pages include flash content. These are not supported by the browser. • The TV does not support any download processes from the web browser.
Using Media Browser This TV allows you to enjoy photo, music or video files stored on a USB device or on a MEDIA SERVER. English Manual Start To display Media Browser window, press the “ ” button on the remote control. The Media Browser menu is also accessable from the main menu. Press the MENU button on the remote. Select Media Browser by pressing Left or Right button and press OK. Select the media type to be listed and press OK.
Using Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB device or on a MEDIA SERVER. English Playing MP3 Files Viewing JPEG Files To play mp3 files from a USB memory or a DMS, you can use this menu screen. To view photo files from a USB Memory or a DMS, you can use this menu screen. When you select Photos in the main Media Browser menu, available image files will be filtered and listed on this screen. • / : Navigate menu.
Using Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB device or on a MEDIA SERVER. English Slideshow Feature • Pause ( • Continue ( (Play Preview): Display selected file in a small preview screen. Press again to stop preview. Red button: Sort files by name. Play ( button): Start to play all files listed beginning with the selected one. LANG - You can use this feature to display all images automatically on your USB Memory or a DMS.
Using Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB device or on a MEDIA SERVER. English Subtitle in Language Settings for selecting movie subtitle language. Media Browser Settings Using MENU button in Media Browser Mode Pressing MENU button while in Media Browser mode displays the following menu screen: You can access Picture, Sound and Settings menu options using this screen. Press MENU again to exit from this screen.
Analogue Only Text Services English This television has a multi-page text memory, which takes a few moments to load. Only available if an analogue service is transmitted. Before using the text services, the required language region must be chosen. • Select Language from the Settings menu. • Highlight Teletext in the Language Settings menu and press Left or Right button to choose the required language region. After the Teletext language is selected, press MENU button to exit.
DVD Mode (RC1910) Buttons on the Remote Control DVD Playback Movie Playback Picture Playback Music Playback Play Play Play Play Pause Pause Pause Pause Stop Stop Stop Stop / e/f / / C Display INFO LANG MENU Skip Skip Previous / Next backward/forward backward/forward Highlights a menu item / Shifts the zoomed picture left or right (if available) Rapid reverse / Rapid advance X Audio language X Displays main menu X REPEAT RETURN Displays repeat options Returns back to
DVD Mode (RC4846) English You can operate DVD, movie CD, music or picture CD’s content by using the buttons on your remote control. Below are the main functions of commonly used remote control buttons. Buttons on the Remote Control DVD Movie Playback Playback Picture Playback Music Playback Play Play Play Play Pause Pause Pause Pause Stop Stop Stop Stop Highlights a menu item. / Shifts the zoomed picture left or right (if available). / Highlights a menu item.
DVD Mode • Warning: Risk of exposure to radiation from class 1/class 3b visible and invisible laser beams. Do not stare directly into beam. English If the television has a built-in DVD module. The following instructions are for correct operation of the DVD. 1 Back of TV CLASS 1 LASER PRODUCT 2 3 Handling Discs • To keep the disc clean, only handle the disc by its edge. Do not touch the surface. • After playing, store the disc in its case.
DVD Mode General Operation English DVD Mode Configuration DOWNMIX 1. While in DVD source, press “DISPLAY” / ” button to access DVD Setup “MYBUTTON1 menu. This is only possible if there is no playback. This mode can be selected when the digital audio output of the TV is used. SURROUND Surround sound output. STEREO Two channels stereo. PARENTAL 2. This menu is operated using “ or “ ” buttons. ” or “ ” and “ ” Playing some DVDs can be limited depending on the age of users.
DVD Mode Troubleshooting & Tips English The DVD picture quality is poor 1. Make sure the DVD disc surface is not damaged (no scratches, fingerprints etc.). 2. Clean the DVD disc and try again. See instructions in “Cleaning Discs” to clean your disc properly. 3. Ensure that the DVD disc is in the loader with the label facing you when looking at the TV screen. 4. A damp DVD disc or condensation may effect the equipment. Wait for 1 to 2 hours in Stand-by mode before using the equipment.
Appendix A: DVD Mode Supported file formats English Media File Extension Format Video .mpg/.dat/. vob Movie .avi Supported (Maximum resolution/Bit rate etc.) Audio MPEG1 MPEG Layer 1/2/3 MPEG2 MPEG2 XviD/3ivx PCM/MP3 MPEG4 PCM/MP3 MS ISO PCM/MP3 Support SP and ASP PCM Sample Rate: 8K ~ 48KHz MPEG 1/2 Sample Rate: 8K ~ 48KHz, Bit Rate: 64K ~ 320Kbps XviD Version up to:1.1.2 MPEG4 Music - .
Appendix C: PC Input Typical Display Modes Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Appendix D: AV and HDMI Signal Compatibility (Input Signal Types) English Source EXT-1 (SCART1) EXT-1 (SCART2) Side AV Supported Signals Available PAL O NTSC 60 O RGB 50/60 O SECAM O PAL O NTSC 60 O SECAM O PAL 50/60 O NTSC 60 O SECAM 480I YPbPr HDMI1 HDMI2 60Hz O O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1080I 60Hz O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1
Appendix E: PIN Information Signal information for Mini D-sub 15 pin connector Pin No. Signal name Pin No. Signal name Pin No. Signal name 1 R 6 Ground 11 NC 2 G 7 Ground 12 NC 3 B 8 Ground 13 H-sync 4 NC* 9 NC 14 V-sync 5 NC 10 Ground 15 NC * NC = not connected English - 49 - English Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket.
Appendix F: Supported File Formats for USB Mode English Supported File Formats for USB Mode Media Extension Format Video Audio Movie .dat, .mpg, .mpeg Mpeg1,2 MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM 1080P@30fps 50Mbit/sec .ts, .trp, .tp, .m2ts MPEG2 ,H.264, VC1, AVS, MVC MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM H.264:1080Px2@ 25fps 1080P@50fps MVC: 1080P@24fps Other: 1080P@30fps 50Mbit/sec .vob MPEG2 MPEG1/2 Layer 1/2/3, AC3, LPCM 1080P@ 30fps 50Mbit/sec .
Re-tune Section Toshiba Digital TV This guide can be used to help you re-tune the following product with the remote control below. Make sure your TV is on and a digital channel is selected 1 ) Press MENU and press ◄ or ► to select Install and Retune and press OK. Press ▲ or ▼ to select Automatic channel scan (Retune) to start the process. 2 ) Select the desired search mode using ► and press OK button.
Specifications and Accessories English Broadcast Systems/Channels DVB-T MPEG2, DVB-T MPEG4 HD DVB-C MPEG2, DVB-C MPEG4 Video Input PAL, SECAM, NTSC 4.
License Information • DVB is a registered trademark of the DVB Project. • [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the television. • YouTube and the YouTube logo are trademarks of Google Inc.
Q & A Section English Sound Picture General Question Answer Why is there no sound or picture? Check if the TV is not in standby mode Check the mains plug and all mains connections Why is there a picture but no sound? Check if the volume has not been turned off or sound mute has not been selected Why does the sound come only from one speaker when stereo sound is selected? Check the balance in the SOUND menu if it has been set to one side or not Why is the soundtrack in English when a different au
The European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007, with phased deadlines to 2018. Toshiba will meet all REACH requirements and is committed to provide our customers with information about the presence in our articles of substances included on the candidate list according to REACH regulation. Please consult the following website www.toshiba.
CONSUMER PRODUCTS – EUROPEAN STANDARD WARRANTY – ENGLISH 1 WARRANTY COVERAGE WARRANTY EXCLUSIONS AND DISCLAIMER a. System Warranty EN English CONSUMER PRODUCTS EUROPEAN STANDARD WARRANTY The Toshiba Limited Warranty is applicable to all “Systems” sold since 01.01.2013.
CONSUMER PRODUCTS – EUROPEAN STANDARD WARRANTY – ENGLISH 2 Toshiba is not liable for any transport/delivery/insurance costs, import duties, taxes, licensing fees and any charges from telephone/fax communication as consequence of the failure of the System. b. Disclaimer of Warranty 1. Repair service is available for Systems purchased and located within a country where Toshiba or its Authorised Service Providers offer warranty service subject to the terms and conditions provided in this Limited Warranty.
CONSUMER PRODUCTS – EUROPEAN STANDARD WARRANTY – ENGLISH 3 REGISTRATION EN English 7. Secure proper packing of the unit if you send it in or in case of pick up through Toshiba. Damages caused by improper packing by the end user will not be covered by Toshiba. Please register your warranty now at: www.toshiba-europe.
If you wish to view the advanced functions but do not have access to a computer or the internet then please contact your nearest owner’s manual Helpline number from the numbers shown below. Country name locally Contact Number Österreich 0810 - 144 122 (7,3 ct/min aus dem Festnetz der Telekom Austria, Mobil ggf.
