User's Manual

The Grand Tour
DKT2000-series Telephones
12 Strata CIX and CTX IPT/DKT Telephone 08/05
Flexible Buttons
All Flexible Buttons must be programmed for your telephone in system programming
and vary for individual telephones. If a button does not appear on your display or
telephone keystrip label, see your System Administrator for button assignments.
Line Buttons
You may have buttons designated as
Line and/or Pooled Line Grp which enable
you to directly access outside lines.
Pooled Line Grp enables you to access
available CO Lines from a group of lines appearing under one button.
Liquid Crystal Display
Your Liquid Crystal Display (LCD)
(shown right) shows:
• Desk Clock and Calendar in idle
mode
•
Call Duration during an outside call
• Operational, Advisory, and
Notification messages
Important! The LCD width of the DKT2000-series telephones is shorter than the
IPTs and DKT3000-series LCDs. This difference causes some features
to display differently.
LCD Control Buttons
There are two types of LCD button functions: LCD Co
ntrol Buttons and Soft Keys.
The DKT2000-series LCD Control Buttons consist of
Mode, Page and Scroll. In
this book these buttons are replaced with SK1, SK2 and SK3.
When the Soft Key prompts appear on the L
CD, the LCD Control Button just below
the prompt offers access to that feature. See “Using Your LCD” on page 31 for more
information.
•
SK1 is generally used as a Soft Key.
• Pressing
SK2 switches you from the Call Forward (CF) display to the User Name
display.
• Pressing
SK3 advances you through information.
5909
Mode Page Scroll
LCD Control
Buttons/Soft Keys
AUG 08 MON 03:56
CF-ALL 202-203+