Instruction Manual

User’s Manual EN-13
TOSHIBA Express Port Replicator II
Component Description
Front hooks Engage holes at the front of the computer to ensure a
secure connection to the port replicator.
Universal Serial
Bus (USB) ports
Connection points for USB 2.0 or 1.1 devices. Four
USB ports are provided on the back of the port
replicator and two on the left side.
Computer lock
switch
In the locked position, helps prevent disconnection of
the computer from the port replicator.
Security lock
slot
Attachment point for an optional security cable (not
included) used to deter theft.
Line out
(Headphones,
Speakers)
A standard 3.5 mm mini jack for audio output to
speakers, a headphone or headset, or other audio
out devices.
Microphone A standard 3.5 mm mini jack for stereo audio input
from a microphone or other recording device.
Network port Connection point for a network cable.
Supports:
*Ethernet (10 megabits per second,
10BASE-T)
*Fast Ethernet (100 megabits per second,
100BASE-T)
*Gigabit Ethernet (1000 megabits per second,
1000BASE-T)
Note: Gigabit Ethernet support is only available if
your computer model also supports it.
LAN connected
light
Glows green to indicate the computer is connected to
a LAN hub.
LAN active light Glows orange when the computer is exchanging data
with the network.
DVI port Connection point for a DVI monitor. Supports DVI-D
monitors only.
RGB monitor
port
Connection point for an analog VGA monitor.
Note: Depending on your computer model, you may
be able to connect external monitors to the DVI port
and the RGB Monitor port simultaneously and display
information on both monitors at the same time. Check
your computer documentation for more information.