Instruction Manual

102
Learning the Basics
Powering down the computer
5.375 x 8.375 ver 2.3
5 Click Apply.
6 Click OK.
Sample Toshiba Power Saver Properties dialog box
For more information about the Power Saver utility, see
“TOSHIBA Power Management” on page 230.
Starting again after Turn off
To start the computer up again, press the power button until
the on/off light changes to green.
If you turned off the computer by closing the display panel,
you can start it again by opening the display panel.
Using Hibernation Mode
Hibernation mode shuts the computer down completely, but it
first saves the current mode of the computer to the hard disk.
Since Hibernation mode does not require power to maintain
the saved information, the system settings are retained
indefinitely. Restoring information from the hard disk takes
NOTE