Answering system User Guide

INSTALLATION

Preparation

SETTING THE DIAL MODE

Depending on your dialing system, set the mode as follows:

1 Press and hold until you hear a confirmation tone.

2 To set the dial mode for pulse dialing, press

Or to set the dial

mode for tone dialing press .

A confirmation tone sounds to indicate the setting is complete.

Note:

Most phone systems use tone dialing.

TONE/

FLASH

TONE/

FLASH

Before using the handset, make sure to read the following instructions.

FT-8901.qx 1/5/1 11:28 AM Page 14