User Guide

4 PRINTING LISTS (EQUIPMENT)
26 To Print Lists
To Print Lists
You can print the scan-related lists shown below in the “user functions mode”.
y Configuration page
y Menu List
y For each list mentioned above, see the following page:
 P.142 “List Print Format”
y For examples of the lists below, see the Setup Guide for Printing Functions.
- NIC status page
- PS font list
- PCL font list
y List printing is not possible when this equipment is actually printing a job. In this case, “Not
allowed now” appears. Attempt list printing again after the completion of the print job.
y The lists are printed on A4 (LT) or A4-R (LT-R) size paper. Check that paper of the specified
size is set.
Configuration Page
You can print out the setting status of the Network Printer Kit (optional) and the Scanner
Upgrade Kit (optional).
See the following Operator’s Manual for details of the setting items regarding scanning func-
tions.
Quick Start Guide for Scanning Functions
Chapter 5 “APPENDIX”
Default Setting List
“Default settings for NETWORK SETTING”
1
Press the [USER FUNCTIONS]
button.
The “user functions mode” main screen
appears.
2
Press or to select LISTS,
and then press the [ENTER]
button.
USER FUNCTIONS 1216
01.DEFAULT SETTINGS
02.LISTS
03.INITIAL SETUP