User Guide

© 2006 - 2011 TOSHIBA TEC CORPORATION All rights reserved GD-1210/1250/1270/1160/1260
DIALING/COMMUNICATION CONTROL
3 - 21
3
3) Example of protocol
The signals shaded in the following figure are the most important signals in the procedure.
- Late start
The receiver cannot detect CM signal while it is sending the ANSam signal. Therefore, it sends a
DIS signal to inform the availability of V.8 support. The transmitter sends a CI signal that causes
the receiver to send another ANSam signal which makes the receiver move to the V.8 procedure.
Fig. 3-8
Transmitter Receiver
Line closed
(
DIS cannot
be recognized
)