Multiprotocol Ethernet Interface User's Manual

54
ICC
11.2 Using FTP with Windows Explorer
To use FTP with Microsoft
Windows Explorer, first open
either “Windows Explorer” or
“My Computer”. Refer to Figure
53. Please note that the
indicated procedure, prompts
and capabilities outlined here
can vary depending on such
factors as the installed
operating system, firewalls and
service packs.
In the “Address” field, type in
“ftp://root@” and then the IP
address of the target interface card (if the user name has been changed from
its default, then replace “root” in “ftp://root@” with the new user name.) Refer to
Figure 54.
Figure 54: FTP Navigation with Windows Explorer
You will then be presented with an authentication dialog (refer to Figure 55.)
The user name will already be filled-in. Enter the case-sensitive password
(default is “icc”) and click “Log On.”
Figure 53: Accessing Windows Explorer