Telephone User Manual

IPedge
Feature Operations
50 TOSHIBA
IPedge UG 06/11
3. After the party answers, press Cnf/Trn. The extension LED flashes (in-
use rate) and all parties are conferenced.
4. If you receive a busy tone or if the station does not answer, press the
flashing extension button to return to the original connection.
5. Press Cnf/Trn and hang up. The extension LED flashes (exclusive-hold
rate) and the two lines are connected. The LED turns Off when the parties
hang-up.
6. To supervise a tandem call, press the extension button. If the parties have
finished, hang up. If the parties are still talking, press Cnf/Trn and hang-
up. Both Line LEDs turn Off and the connection is released.
If your telephone company provides automatic disconnect
supervision, the connection will release automatically when the
parties hang up. If not, the lines must be supervised to be
disconnected.
Conference Add/Split/
Join/Drop
If you initiate a conference with two or more parties, you can continue to add
outside callers to conference; or you and another member of the conference
can leave (Split) the conference for a private conversation. During this time,
other conference members remain connected.
You can then Join both of you back into the conference, or you can Drop
(disconnect) the member you are connected to. This feature is performed with
Soft Keys if you have a LCD phone or with a Split button programmed on one
of your Programmable Feature Buttons.
This feature also works for remote stations which are connected through
IPedge Net.
Important! You must be a conference master to perform the Add,
Split, and Drop features. The conference master is the
person that initiates the conference call. If that person
drops from the conference, the first person added to
the conference becomes the conference master.
Add an Incoming call to
the Conference
1. Place the first caller/Conference on hold.
2. Answer the incoming ringing call.
3. While speaking to the incoming caller, press Cnf/Trn button.
4. Press the blinking DN where the first caller/Conference was placed on
hold.
5. Press Cnf/Trn twice to join all parties together.
Split from a conference 1. While in a conference call on an IP5000-series phone, press the
SPLT
(Split) soft key or Split button.
2. Press the
NEXT soft key until you see the extension number for the party
that you want to Split out of the conference.
3. You can return both yourself and the other Split party back into the
conference by pressing
JOIN.
RTRN terminates a feature operation and returns to the previously
displayed state.
Drop the Split party from a
conference
Press the
DROP Soft Key. The party that you are talking to privately (the party
which you have Split from the conference) will be disconnected (Dropped)
and you will rejoin the conference.