Telephone User Manual

10 IP5000-series Telephone Quick Reference Guide 03/12
Paging
 To make an All Call Page
1. With the handset off-hook, press
All Call Page. This pages
all phones in the All Call Page Group, and may page external
speakers (depends on programming).
2. Make your announcement, then hang up.
Speed Dial
Important! The procedures below are for IP5000-series telephones
connected to Strata CIX systems.
For IPedge refer to the IPedge Telephone, Messaging
and Call Manager User Guide.
 To store a Station Speed Dial Number
1. Dial
#9876.
2. Press
Spdial.
3. Enter a Speed Dial Code (100~199).
4. Enter the number to be stored (32 digits max.).
5. Press
Spdial button to store the entry.
6. Repeat steps 2~5 to add more speed dial numbers.
7. To end programming session, lift and replace the handset.
 To clear a number from a Station Speed Dial code
 Repeat the previous procedure skipping Step 4.
 To make a call using Speed Dial
1. Lift the handset. Press Spdial, then dial the Speed Dial
Number.
2. Access a outside line (if necessary).
Note You may need to lift the handset and access an outside line
before pressing Spdial (depending on your telephone setup).
CAUTION! Do not use cleansers that contain benzene, paint
thinner, alcohol or other solvents on the
telephone's rubber feet. The color of the rubber
may transfer to the desk or mounting surface.