USER MANUAL L9363 Digital Series M9363 Digital Series
English Contents Setting the auto start mode ................................ 33 Adjusting 2D to 3D Depth .................................. 34 Setting the 3D PIN code .................................... 34 Setting 3D Start Message .................................. 34 Setting 3D Lock .................................................. 35 Setting 3D Timer Lock ....................................... 35 Setting Enable 3D Timer .................................... 35 Displaying 3D Important Info ...........
TEXT SERVICES Text services ............................................................. 90 Selecting modes ................................................ 90 Text information ................................................. 90 Navigating pages using Auto ............................. 90 Navigating pages using LIST ............................. 90 Control buttons ................................................... 91 PROBLEM SOLVING Questions and Answers ............................................
English INSTALLING YOUR TV Safety Precautions DO use a soft, dry cloth to clean the unit. This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products, and some points may not apply to the goods you have just purchased.
INSTALLING YOUR TV English Installation and important information Where to install Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. 58L/58M/65L/65M9363 the back of your television Screw (supplied) Place the TV on a stable, level surface that can support the weight of the TV.
English INSTALLING YOUR TV 3 4 Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket. Always use the screws supplied or recommended by the wall mount manufacturer. Removing the Pedestal Stand: • For 58L/58M/65L/65M9363 1 Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket.
INSTALLING YOUR TV Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by: i) Fire; ii) Earthquake; iii) Accidental damage; iv) Intentional misuse of the product; v) Use of the product in improper conditions; vi) Loss and/or damage caused to the product whilst in the possession of a third party; vii) Any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s manual; viii) Any loss or damage caused dir
English INSTALLING YOUR TV The remote control 19 - Accesses the CLOUD HOME 20 - Access to premium content available online 21 To access the on-screen Menu 22 To display the digital on-screen Programme Guide 23 To page up, down, left or right 24 When using menus, the arrows move the cursor on the screen up, down, left or right.
CONNECTING YOUR TV English Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. SD ILLUSTRATION SHOWS 65L9363.
English CONNECTING YOUR TV Connecting an HDMI® device To output audio signals from the TV The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device. Connect a component to the HDMI 2 terminal using an HDMI cable, then connect audio output on the component and the PC/HDMI 2 (AUDIO) jack using an audio cable. • Select HDMI for PC/HDMI 2 Audio setting. (See page 87.
CONNECTING YOUR TV You can control the basic functions of connected audio/video devices using the television’s remote control if you connect an HDMI CEC compatible AV amplifier or playback device. For an explanation of setup and operations, see pages 88–89. the side of your television AV amplifier Playback device Playback device For the setup shown above, you will need three HDMI cables. NOTE: • If several devices are connected, the HDMI CEC Control feature may not operate properly.
English CONNECTING YOUR TV Connecting a computer To output audio signal from the TV With either an HDMI or an RGB/PC connection, you can watch your computer’s display on the television. Connect a PC to the HDMI 2 terminal using an HDMI cable, then connect audio output on the PC to the PC/ HDMI 2 (AUDIO) jack using a PC audio cable. • Select HDMI for PC/HDMI 2 AUDIO setting. (See page 87.
CONNECTING YOUR TV The LAN port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to access photo, video and audio files that are stored on a media server and play/ display them on your TV. To display the optimum picture, use the PC setting feature (see page 85). To output audio signal from the TV Connect a PC to the RGB/PC terminal, then connect audio output on the PC to the PC/HDMI 2 (AUDIO) jack using a PC audio cable.
English CONNECTING YOUR TV To connect the TV to a home network with an internet connection - Wireless To connect the TV to the PC with Intel® Wireless Display Please refer to “Wireless Setup” section on page 47. PC with Intel® Wireless Display Access point (AP) Wireless LAN router Intel® WiDi Modem Computer NOTE: • If this device is going to be operated in the frequency range of 5.15 GHz to 5.35 GHz, it is restricted to indoor use. • If this device is going to be operated for 802.
CONNECTING YOUR TV English Controls and input connections A wide variety of external equipment can be connected to the input sockets on the side/back of the television. While all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions. ILLUSTRATION SHOWS 58L9363. SD card slot To remove the SD card, push it in.
English CONNECTING YOUR TV Using the menu system Press Press B / b Press B / b and OK or c Recording Setup on the remote control to display the menu. The menu appears as a list of eight topics. As each icon is selected by pressing B / b on the remote control, its respective options will appear on the right.
SETTING UP YOUR TV d Before switching on the TV make sure that your aerial is connected and any decoder / media recorder, if applicable is connected and in Standby. Press BbC c to highlight Next and press OK. The Location screen will appear. Quick Setup Quick Setup b Smart TV Press the 1 button, Toshiba logo will appear. After that, The Menu Language screen will appear. This screen will appear the first time that the television is switched on and each time Reset TV is executed.
English SETTING UP YOUR TV There are 3 methods for Wireless Setup: - TKIP/AES: 8-63 ASCII or 64 Hex characters - WEP: 5 or 13 ASCII or 10 or 26 Hex characters • There is only one key ID to set for WEP encryption. • Easy Setup (WPS) - If the AP supports WPS, this method can be used. WPS is an industry standard designed to make connection of wireless LAN equipment and security setup easy. WPS will automatically configure all wireless settings. Press B / b to highlight Done and press OK.
SETTING UP YOUR TV o Press B / b to highlight Done and press OK. When the message “Wireless configuration is complete.” appears on screen, press OK. Press OK, and TV Power On Control screen will appear. Select Disabled or Enabled and highlight Next. Quick Setup TV Power On Control 1/2 Country Location NOTE: Settings are not saved if BACK is pressed before Done is selected. m Network Smart TV The Advanced Network Setup screen will appear.
English SETTING UP YOUR TV s NOTE: • None is being used when the satellite dish will control only one universal Low Noise Block (LNB) with a single satellite (e.g. Astra 19.2°). As a rule, most households use just one satellite. • ToneBurst sends a 22 kHz signal. ToneBurst is only necessary for simple LNBs (not universal LNBs). The 22 kHz signal is needed for switching LNBs with multifeed signals as well as for changing between low- and high-band.
SETTING UP YOUR TV Switch Type None LNB Power If your satellite dish is moveable, the following Positioning screen will appear. On No. Satellite 1 Astra 19.2E Dish 1 Positioning LNB 1 Transponder 2 1/120 (10729 MHz V (R)) Go to 0 3 Go to Stored Position 4 Step Size 1 Positioning Transponder : 1/120 (10729) MHz Dish Type : Fixed Lower LOF : 9750 Upper LOF : 10600 W E Satellite : Astra 19.
English SETTING UP YOUR TV x If the reception testing completes successfully, the Auto Tuning startup screen will display. f Auto Tuning - Satellite Scan Type Fast Scan Search Option Free to Air Press B / b to select an item and press c and B / b to select your desired option. Start Scan Auto Tuning - Cable Tuning Mode You can select Search Option from Free to Air or All. Press b to highlight Start Scan, and press OK. The television will start to search for available DVB-S channels.
SETTING UP YOUR TV From the System Setup menu, you can add the satellites that you wish to tune and configure detailed settings for each one individually. To add a satellite: a Press icon. b Press c and B / b to select Channel Tuning and press OK. c To edit the satellite settings: a In the Satellite Settings menu, press B to highlight Switch Type. b Press C / c to select None, ToneBurst, DiSEqC 2way, DiSEqC 4way or Single Cable as your satellite switch type.
English SETTING UP YOUR TV To delete a transponder: c a In the Transponder Settings menu, press B / b to highlight the line you want to delete. b Press the RED button. Press B / b to select Lower LOF or Upper LOF and use the number buttons (0-9) to input the appropriate frequencies. Auto Tuning NOTE: As new services are broadcast, it will be necessary to re-tune the television in order to view them.
SETTING UP YOUR TV a Tuning < Channel Tuning Ant/Cable/Satellite The television can be tuned-in manually using ATV Manual Tuning. For example, you might use the feature if the television cannot be connected to a media recorder/ decoder with a SCART lead or when you want to tune-in a station on another System. Use C / c to move across the screen and select any of the ATV Manual Tuning options. Then use B / b to adjust the settings.
English SETTING UP YOUR TV g h Each signal will show on the television. If it is not your media recorder, press B / b again to restart the search. When your media recorder signal is found, press c to move along to Station. Use BbC c to put in the required characters, e.g. VCR. ATV Manual Tuning Skip To prevent certain channels from being viewed, positions can be skipped. a Select ATV Manual Tuning from the Channel Tuning menu. b Press B / b to highlight the position to be skipped and press OK.
SETTING UP YOUR TV Channels may be moved and saved to the position of your choice. a Select ATV Manual Tuning from the Channel Tuning menu. b With the list of channels showing, press B / b to highlight the position to be moved and press c. Channels Line No. Antenna TV DTV Manual Tuning NOTE: This feature varies depending on the Ant/Cable/ Satellite setting. Manual Tuning This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known.
English SETTING UP YOUR TV Manual Tuning for DVB-C DTV Settings When Ant/Cable/Satellite is set to Cable, DTV Manual Tuning items are as follows: Frequency: Input a specific frequency to be scanned Modulation: Choose from one of five QAM modulation options Symbol Rate: Input a specific baud rate (KS/s) to be used for the manual scan Highlight Start Scan and press OK. Channels (Antenna/Cable) The channel order may be changed to suit your personal preference.
SETTING UP YOUR TV c you wish to move and press OK to check. If you wish to move multiple channels at once, select another channel and check in the same way. Repeat as necessary. Once all desired channels have been checked, press B / b to place the focus at the position to which you wish to move the channels. The channels will be inserted above the highlighted channel. Press the GREEN button to execute the move.
English CONTROLS AND FEATURES General controls Quick menu item example Mode Quick Menu Quick Menu helps you access some options quickly, such as Picture Mode, Picture Size, More Information, Sleep Timer etc. Single Window Press QUICK to open the Quick Menu and use B / b to select the option. Quick Menu Intel® WiDi Picture Mode Quick menu item When viewing a TV programme or pictures from the external input Standard Description Intel® WiDi See page 67. Picture Mode See page 40.
CONTROLS AND FEATURES For DTV programmes For stereo or dual mono broadcasts, press s and use C / c to select settings. Pressing c Mode Display Stereo Dual mono Stereo S Left S Right Dual 1 S Dual 2 S Dual Mono – Multichannel – For multi-audio track broadcasts, press s repeatedly to change the audio language (see “Audio languages” on page 82). Using 3D functions Before using 3D programming, see and follow “Important information for 3D viewing” section on page 103.
English CONTROLS AND FEATURES To switch to 3D mode: Switching display mode or selecting 3D format • Set 3D Auto Start in the 3D menu to 3D. • Press 3D while viewing 2D mode or Native mode. There are four modes for watching TV. Mode Trigger of Switching Display Mode Press 3D button Description 3D Displays 3D images. 2D Changes 3D images to 2D. 2D to 3D* Changes 2D images to 3D. Native Displays a received signal format as it is.
CONTROLS AND FEATURES To switch to Native mode: • Set 3D Auto Start in the 3D menu to 2D. • Press 3D while viewing 3D mode. • Press 3D while viewing 3D mode. • Press 3D while viewing 2D to 3D mode. Trigger of Switching Display Mode Input Signal Type Additional Info Format 3D Format Signal With 3D Auto Detect Information FP Source Signal * 3D 3D * 3D TB Without 3D Auto Detect Information * 3D SBS 3D SBS 3D 3D 3D b Press B / b to select 2D Format Select and press OK.
English CONTROLS AND FEATURES Adjusting 2D to 3D Depth Setting the 3D PIN code You can adjust the level of 3D. A 3D PIN code is necessary for using 3D Safety Settings. From the Menu: To enter a new PIN code: a In the 3D menu, press B / b to select 2D to 3D Depth and press OK. a In the 3D menu, press B / b to select 3D PIN and press OK. b Press C / c to select 1, 2, 3, 4, or 5 and press OK. b Press the number buttons to enter a 4-digit number. Confirm the code.
CONTROLS AND FEATURES When this feature is set to On, you must enter 3D PIN code for changing display mode. Displaying 3D Important Info a In the 3D menu, press B / b to select 3D Important Info and press OK. A message will appear. a In the 3D menu, press B / b to select 3D Safety Settings and press OK. b Enter your 4-digit 3D PIN code. c Press B / b to select 3D Lock. The left and right images of the glasses can be swapped.
English CONTROLS AND FEATURES Sound controls TV Mounting (Wall/Table) Audyssey TV Mounting feature can provide an appropriate sound depending on the TV installation type, that TV is installed on a wall or a TV table. Volume controls and sound mute Volume Press 2+ or 2– to adjust the volume. Sound Mute Press once to turn the sound off and again to cancel. Dual a In the Sound menu, press B / b to select Audyssey Premium Television and press OK. b Press B / b to select TV Mounting.
CONTROLS AND FEATURES English Audio Level Offset Headphone Settings Sometimes there can be large changes in volume when switching from a DTV 5.1ch to a DTV 2ch, an ATV channel, or an external input. Using the Audio Level Offset feature reduces these volume differences. This setting is used to set the sound output when headphones are connected. Speaker Link a Set the volume level usually used when watching a DTV 5.1ch programme. b Tune to a channel which is DTV 2ch, ATV or an external input.
English CONTROLS AND FEATURES Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. WIDE Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen. 4:3 Use this setting to view a true 4:3 broadcast.
CONTROLS AND FEATURES English NATIVE This setting will show the picture without overscan, i.e. WYSIWYG. PC NORMAL This setting will show the picture without overscan, i.e. WYSIWYG. This option is only available when watching a PC signal source via HDMI or PC terminal. PC WIDE This setting will show the picture without overscan or side panels. This option is only available when watching a PC signal source via HDMI or PC terminal.
English CONTROLS AND FEATURES Press the button on the remote control to display the list of available widescreen formats. Picture controls Press the button repeatedly to highlight the required format. Most of the picture controls and functions are available in both digital and analogue modes. PLEASE NOTE: Features not available will be greyed out. The Quick Menu feature can also be used to select Picture Size.
CONTROLS AND FEATURES Base Colour Adjustment You can customize current picture mode settings as desired. For example, while selecting “Dynamic”, if you change the following items, such as Backlight, Contrast, Brightness, Colour, Tint, Sharpness and the Advanced Picture Settings items, your new settings are saved for “Dynamic” picture mode. The Base Colour Adjustment feature allows the adjustment of individual colours to suit personal preference. This can be useful when using an external source.
English CONTROLS AND FEATURES Auto Brightness Sensor MPEG NR – Noise Reduction When the Auto Brightness Sensor is activated, it will automatically optimise the backlighting levels to suit ambient light conditions. When watching a DVD, the compression may cause some words or picture elements to become distorted or pixelated. Using the MPEG NR feature reduces this effect by smoothing out the edges. a b In the Advanced Picture Settings menu, press B / b to select Auto Brightness Sensor and press OK.
CONTROLS AND FEATURES Resetting the advanced picture settings This feature helps to eliminate video shaking. a In the Advanced Picture Settings menu, press B / b to select ClearScan and press OK. b Press B / b to select High, Middle, Standard or Off. This feature allows you to reset the current Advanced Picture Settings to the default values. a In the Advanced Picture Settings menu, press B / b to select Reset. b Press OK.
English CONTROLS AND FEATURES Colour Decoding White Balance-10P White Balance If you view DVDs with this TV, the Colour Decoding option may be set to ensure the colourimetry reproduction. a Press b to select 10P White Balance. NOTE: The modes excluding Auto (BT.709 and BT.601) are to convert an irregular signal output from the DVD etc. with incorrect colour to the optimum state. If BT.709 or BT.601 is selected with a normal signal received, the colour may not be correctly displayed.
CONTROLS AND FEATURES Picture Position When this television receives a true Widescreen picture and Auto Format is On, it will automatically be displayed in Widescreen format irrespective of the television’s previous setting. The picture position may be adjusted to suit personal preference and can be particularly useful for external inputs. a Press b Press c and B / b to select Display Settings and press OK. NOTE: The Picture Position feature cannot be selected on DTV or PC Inputs.
English CONTROLS AND FEATURES Wireless LAN Information Bluetooth™ and Wireless LAN devices operate within the same radio frequency range and may interfere with one another. If you use Bluetooth™ and Wireless LAN devices simultaneously, you may occasionally experience a less than optimal network performance or even lose your network connection. If you should experience any such problem, immediately turn off either your Bluetooth™ or Wireless LAN device.
CONTROLS AND FEATURES Easy Setup using PBC (Push Button Configuration) You can select the Network Type. a Press b Press c and B / b to select Network Setup and press OK. a In the Network menu, press B / b to select Network Setup and press OK. b Press B / b to select Wireless Setup and press OK. c Press B / b to select Easy Setup and press OK. and B / b to highlight Network icon.
English CONTROLS AND FEATURES To cancel searching for the AP: Manual Setup Press BACK while searching for the AP. A message will appear, and then press C / c to select Yes and press OK. a In the Network menu, press B / b to select Network Setup and press OK. b Press B / b to select Wireless Setup and press OK. Assisted Setup a In the Network menu, press B / b to select Network Setup and press OK. c Press B / b to select Manual Setup and press OK.
CONTROLS AND FEATURES Item The settings configured in Wireless Setup can be confirmed. a Press QUICK to open the Quick Menu. b Press B / b to select Wireless Information and press OK.
English CONTROLS AND FEATURES Advanced Network Setup d NOTE: • When the DHCP function of the router connected with this TV is On, you can set Auto Setup to On or Off. (This should usually be set to On.) • When the DHCP function of the router is Off, set Auto Setup to Off, and set the IP Address manually. IP Address Setup Auto Setup a In the Network menu, press B / b to select Network Setup and press OK. b Press B / b to select Advanced Network Setup and press OK.
CONTROLS AND FEATURES You can view the fixed MAC address for the TV (Wired and Wireless). NOTE: When the DHCP function of the router connected to this TV is Off, set Auto Setup to Off, and manually set the DNS address(es). Your internet service provider should have provided these to you. Auto setup a In the Network menu, press B / b to select Network Setup and press OK. b Press B / b to select Advanced Network Setup and press OK. c Press B / b to select DNS Setup and press OK.
English CONTROLS AND FEATURES Using the software keyboard Network Device Setup You can enter text by using the Software Keyboard. The Software Keyboard window will appear when you press OK on a field that accepts character input. To enter text using the software keyboard: a Highlight the desired character on the on-screen software keyboard. b Press OK. c Repeat steps 1 and 2 until you have entered all desired text.
CONTROLS AND FEATURES Media Renderer Setup Once a User Name has completed authentication, it is stored in the TV along with the password. The upper limit for the number of Use Names that can be remembered is 20. You can delete User Names that are stored in the TV. a In the Network menu, press B / b to select Network Device Setup and press OK. b Press B / b to select External Control Setup and press OK. c Press B / b to select Apps Control Profile and press OK.
English CONTROLS AND FEATURES USB HDD Record Function Setting up the USB HDD for recording This function can be used to record and play digital broadcast programmes (function is dependant on country selection). Read the precautions below before recording or viewing programmes using the USB HDD record function. To connect a USB HDD (not supplied): NOTE: • In order to use this function, a USB HDD needs to be connected to the TV. Do not use USB Hub.
CONTROLS AND FEATURES Programmed recording can be scheduled easily using the Programme Guide or by specifying the date and time. To search for and record a programme using Genre Search: a PLEASE NOTE Press the YELLOW button on the remote control to access the Genre Search screen. Genre Search When a timed programme is about to start, an information screen will appear offering the option of watching or cancelling the programme.
English CONTROLS AND FEATURES To programme the timer: a Press the BLUE button on the remote control. b Select the unprogrammed column (blank column) and press OK. The Edit Timer screen will appear. Press B / b to select Timer Type. Edit Timer Timer Type a 5:51 Tue, 22 Apr Press , the information screen will appear giving details of the channel and programme currently being viewed.
CONTROLS AND FEATURES To view a recorded programme To view the recorded Library screen and select a title from the recorded programme list. You can check, edit or delete scheduling information. a a Press GUIDE and then press the BLUE button. Programme Timers screen will appear. Recording List Library / All Sort : New Thu, 17 Feb 10:00 Thu, 17 Feb 10:00 Fri, 18 Feb 10:00 Fri, 18 Feb 10:00 WWWWWWW Fri, 18 Feb 10:00 WWWWWWW Sat, 19 Feb 10:00 Sun, 20 Feb 10:00 1235 ITV London ASTRA 19.
English CONTROLS AND FEATURES To delete a recorded programme: Operations from the Library screen As well as viewing the list of recorded titles on the Library screen, you can protect or delete titles and register titles to Personal Mode. a Press the RED button. Check boxes will appear next to the titles. b Press B / b to select the title you want to delete and press OK. A check mark will be inserted in the check box.
CONTROLS AND FEATURES You can set your preferences for recording. To select USB HDD and Partition for Recording: a Press b Press c and B / b to select Recording Setup and press OK. c Press B / b to select Select Device and press OK. USB HDD and Partition list will be appear. If USB HDD is partitioned by PC, several partitions will be displayed. a In the Recording Setup screen, press B / b to select TimeShift Size. b Press c and B / b to select 512 MB, 1 GB, 2 GB or 4 GB and press OK.
English CONTROLS AND FEATURES To perform a USB HDD operation test: a In the Recording Setup screen, press B / b to select Device Test and press OK. USB HDD operation test will start. Wait until the test ends. NOTE: The results of the device test are only a guide. The device may not function as shown in the results. To format a USB HDD: a In the Recording Setup screen, press B / b to select Format Device and press OK.
CONTROLS AND FEATURES To browse favourite websites NOTE: You can change the mouse mode (Mouse Emulation or Navigation) by pressing the GREEN button on the remote control when the web contents screen is open. a Press on the remote control and select Internet icon to open the web browser. b Use BbC c to select Favourites STAR and press OK. c Select the item or folders to move to the desired URL address and press OK. d You can now browse websites on your TV using BbC c on the remote control.
English CONTROLS AND FEATURES Using Skype 65L/65M/84L/84M9363 only Skype-ready Toshiba TVs bring your family and friends closer to your home. Skype on your Toshiba TV allows you to share special moments no matter the distance. When attaching the camera to the TV, use the two sponges (supplied). • Peel off the stickers from the adhesive surfaces of the sponges, and then attach them to the TV. Before using Skype - Preparation • Connect the FREETALK HD Camera: TALK-7291 to the TV’s USB terminal.
CONTROLS AND FEATURES To Sign into Skype: If you do not already have a Skype account, you can create a new one from your TV. If you have a Skype account, sign into Skype in the Welcome to Skype screen. a a Enter your Skype Name and Password. b Select Sign in and press OK. Select Create Account in the Welcome to Skype screen and press OK. Create new Skype account • If “Sign in when Skype starts” is checked, your account will sign in automatically when you launch Skype from the menu.
English CONTROLS AND FEATURES Contacts/People Resume the call Press B / b to select Contacts/People tab. Press c and B / b to select a contact.
CONTROLS AND FEATURES When you receive a contact request, a pop-up menu will appear where you can choose to Accept, Block or Decline the request. You can add contacts to your list of contacts. When you press the YELLOW button, the Add Contact Type menu window will appear. Press B / b to select and press OK.
English CONTROLS AND FEATURES Dialer Settings You can call mobiles and landlines from this screen. Press B / b to select the Settings tab and press OK. Press B / b to select the Dialer tab. Press c and B / b to navigate this screen. The Settings window will appear.
CONTROLS AND FEATURES Intel® Wireless Display (Intel® WiDi) is supported on this TV. You can use your TV as second display for PC with Intel® Wireless Display. Hybrid TV Standard enables the TV to receive HbbTV services. TV services which support this feature often show “press RED” on the screen. NOTE: You need to configure a home network before using this feature (see page 13). a Press b Press c and B / b to select Hybrid TV Standard.
English CONTROLS AND FEATURES Using the Media Player Intel® WiDi Device Name ® The TV's Intel WiDi device name can be changed. a In the Network menu, press B / b to select Network Device Setup and press OK. b Press B / b to select Intel® WiDi Setup and press OK. c Press B / b to select Intel® WiDi Device Name and press OK. This TV allows you to enjoy movie, music and photo files stored on a USB device connected to the USB port, or an SD card inserted in the SD card slot.
CONTROLS AND FEATURES English To select a file in the list of contents: Basic operation Using Media Player with a USB or SD card When USB/SD Card Auto Start is enabled, you will be asked if you want to start the Media Player whenever a USB device or SD card is inserted. If USB/SD Card Auto Start is disabled (or if you want to connect to a media server on the network), you must manually start the Media Player from the menu. a Press BbC c to select a file or folder.
English CONTROLS AND FEATURES To sort files (if available): Viewing photo files (on a media server, USB device or SD card) You can sort files by file name (title) or date accordingly. a Press BbC c to highlight Sort and press OK. b Press B / b to select File Name (Title), New or Old and press OK. There are two types of viewing modes. Photos List (USB, SD card and Network Player Photo) This view allows you to search for photos in a grid format.
CONTROLS AND FEATURES In this mode, only files located in the selected directory will be displayed. This view allows you to change the photo content manually. When moving from Photos List to Single View, the currently selected photo will be displayed. a Press c to view the next photo. Press C to view the previous photo. Selecting the Playback Mode: You can view 3D photos in 3D. a Press 3D on the remote control while in Single View mode or Slide Show mode.
English CONTROLS AND FEATURES To select a photo from Play List (USB, SD card and Network Player Photo): Viewing movie files (on a media server, USB device or SD card) While in the Single View mode or Slide Show mode, you can select a different photo from the Play List. a Press QUICK to open the Quick Menu from Single View mode or Slide Show mode. b Press B / b to select Play List and press OK. The Photos List will appear. c You can select movies from a Videos List of available files.
CONTROLS AND FEATURES Resume Play (USB and SD card) • Press W to pause. PAUSE may not be available depending on the contents or media server. • To resume normal playback, press c (play). • To play in fast reverse or fast forward directions, press CC / cc during playback. Each time you press the CC / cc, the playback speed will change. • Press Z to playback from the beginning of currently selected file. Press z to locate subsequent files.
English CONTROLS AND FEATURES To register your TV to a DivX® account: To playback DivX Plus HD content: This TV allows you to play back files purchased or rented from DivX® Video-On Demand (VOD) services. When you purchase or rent DivX® VOD files on the internet, you will be asked to enter a registration code. • To play in fast reverse or fast forward directions, press CC / cc during playback. Each time you press the CC / cc, the playback speed will change.
CONTROLS AND FEATURES To set the repeat mode: a Press QUICK to open the Quick Menu. You can listen to music from a Music List of available files. b Press B / b to select Repeat. Music List (USB, SD card and Network Player Music) c Press c and B / b to select Off, All or 1. Videos Music Devices: /usb/sda1 Photos Mode Search Sort: File Name Files in the same folder are played back once. All Files in the same folder are repeatedly played back. 1 The same file is repeatedly played back.
English CONTROLS AND FEATURES Other features Netflix® Panel Lock NOTE: Netflix® services may be unavailable for some areas. Panel Lock disables the buttons on the television. All buttons on the remote control can still be used. To confirm the Netflix ESN (Electronic Serial Number) a Press b Press c and B / b to select Panel Lock and press OK. c and B / b to highlight Options icon. Press B / b to select On. a In the Network menu, press B / b to select Smart Apps Setup and press OK.
CONTROLS AND FEATURES e Programme Timers – digital only Power On Time (only for DTV Clock On mode): Set the time you prefer with the number buttons. Repeat (only for DTV Clock On mode): Select the desired On Timer operation (Once, Every Day, Mon-Fri, Mon-Sat, Sat-Sun). Input: Select a video input source (ATV, DTV Ant, EXT 1, EXT 2, HDMI 1, HDMI 2, HDMI 3, HDMI 4 or PC). Channel: Set the channel that will be tuned when the television turns on.
English CONTROLS AND FEATURES Energy Saving Settings Digital on-screen information When viewing in digital mode, the on-screen information and programme guide provide access to programme details for all available channels. Automatic Power Down The TV will automatically turn itself off (Standby) after 4 hours, if you do not operate the TV either from the remote control or the TV control panel. a Press b Press c and B / b to select Power Management and press OK.
CONTROLS AND FEATURES a Press QUICK to open the Quick Menu. b Press b to highlight More Information and press OK.
English CONTROLS AND FEATURES Genre selection/searching From the Guide screen, you can use the genre selection and search features. a In the Guide screen, press QUICK. b Press B / b to highlight Genre Colour in the Quick Menu and press OK. Digital settings – parental control In order to prevent viewing of unsuitable films and programmes, channels and menus can be locked in digital mode. These can then only be accessed with a security code PIN.
CONTROLS AND FEATURES The Parental Control feature allows you to block programmes according to their rating levels. If a PIN has been set, you will need to enter it before adjusting the level. a In the DTV Settings menu, press B / b to select Parental Control and press OK. b Press B / b to select Parental Setup or Playback Setup and press OK. Parental Setup: Select when you want to set viewing restrictions on broadcast programmes.
English CONTROLS AND FEATURES Digital settings – other settings Skip channels This feature allows you to set channels that will be skipped when Pu or PU are used to tune. Subtitles a Select the channel you want to skip in your channel list. b In DTV mode, this feature will show subtitles on the screen in the selected language provided they are being broadcast. In the Quick Menu, press b to select Channel Options and press OK.
CONTROLS AND FEATURES The Common Interface Slot, situated on the side of the television, enables the insertion of a CAM (Conditional Access Module) and card. These are purchased from a service provider and allow additional subscription broadcasts to be viewed. For information, see a service provider. a Insert the CAM and card into the Common Interface Slot, following the instructions provided with the CAM. A box will appear on screen to confirm that the CAM has been inserted. b Press icon.
English CONTROLS AND FEATURES Software Licences The licences for the software used in this television are available for viewing. a In the Get Help menu, press B / b to select Software Licences and press OK. A screen will appear displaying all the licensing information required for the televisions software. System Information and Reset TV System Information This feature can be used to check the version of software currently installed.
CONTROLS AND FEATURES Sampling Clock Horizontal and Vertical Position Connect the PC (as shown in the ‘Connecting a computer’ section) and ensure that a picture is showing on the television screen. The picture position may now be adjusted to suit personal preference. a Press b Press c and B / b to select Display Settings and press OK. c and B / b to highlight Picture icon. a In the Display Settings menu, press B / b to select PC Settings and press OK. b Press B / b to select Sampling Clock.
English CONTROLS AND FEATURES Input selection and AV connections See page 9 for a detailed image showing recommended connections. Most media recorders and decoders send a signal through the SCART lead to switch the television to the correct Input socket. Labelling video input sources These input labels are shown in the input selector. You can label video inputs according to the devices you have connected to the TV. a Press b Press B / b to select AV Connection and press OK.
CONTROLS AND FEATURES When connecting a surround sound amplifier to the digital audio output (Sony/Philips Digital Interface Format [S/ PDIF]), the following options can be selected or adjusted. a In the Sound menu, press B / b to select Digital Audio Output and press OK. < Sound Balance 0 Bass 0 Treble 0 Audyssey Premium Television Dynamic Range Control Dual On Dual 1 Audio Level Offset TV Speakers On Headphone Level Audio Description Digital Audio Output b Press B / b to select an option.
English CONTROLS AND FEATURES Using HDMI CEC Control Amplifier Control This is a new feature that uses CEC technology and allows you to control Toshiba HDMI CEC Control compatible devices from the television remote control via HDMI connection (page 11). When the Enable HDMI CEC Control item in the HDMI CEC Control Setup menu is set to On, individual functions also set to On will be activated. Press b Press c and B / b to select HDMI CEC Control Setup and pres OK.
CONTROLS AND FEATURES Using MHL TV function You can use the following functions by connecting between the TV HDMI 3 port and a USB port of mobile phones etc. with an MHL cable. • Charge with mobile phone from TV • Two-way remote operation between TV and mobile phone • Video/Audio output from mobile phone NOTE: These functions may not be available depending on the connected device.
English TEXT SERVICES Text services Navigating pages using Auto If Fastext is available, four coloured titles will appear at the base of the screen. This television has a multi-page text memory, which takes a few moments to load. It offers two Modes of viewing text – Auto will display Fastext, if available. List will save your four favourite pages. To access one of the four given subjects, press the relevant coloured button on the remote control.
TEXT SERVICES English Control buttons Below is a guide to the functions of the remote control text buttons. k To display the index/initial page: Press k to access the index/initial page. The one displayed is dependant on the broadcaster. TEXT To display a page of text: Press TEXT to display text. Press again to superimpose text over a normal picture. Press again to return to normal television viewing. Channels cannot be changed until this has been done.
Questions and Answers Below are the answers to some of the most common queries. Question Sound Why is there no sound or picture? Answer Check the television is not in Standby mode. Check the mains plug and all mains connections. Why is there a picture but no sound? Check all lead connections. No sound or unacceptable format sound may be received. Check the volume has not been turned down or that sound mute has not been selected. Check shared audio settings.
PROBLEM SOLVING Answer Picture Why are the colours wrong when an NTSC source is played? Connect the source via a SCART lead and play. Select Colour System from the Options menu. a Set the Colour to Auto and exit. b Go to the Picture menu and adjust the tint. Why don’t the controls of the television work? Check that Panel Lock is not On. Why doesn’t the remote control work? Check that batteries aren't exhausted or inserted incorrectly.
English PROBLEM SOLVING Question Answer Why don’t the networked devices work? The LAN cables are not connected properly or at all. Connect all cables (see page 13). Make sure your network address is set up correctly (see page 50). Why doesn’t the wireless network work? Check that the AP is powered on. General Why doesn’t the Media Player feature Make sure that devices are connected correctly. operate? Incorrect behaviour may occur with a USB Hub connection.
INFORMATION English Information Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. Signal information for Mini D-sub 15 pin connector Pin No. Signal name Pin No. Signal name Pin No.
English INFORMATION Acceptable video or PC signals through the HDMI terminals The HDMI inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are compliant with VESA as shown in the table below. Since some PCs and HDMI or DVI devices input signals which are different from the resolution and frequency described in the table below, the following phenomenon may occur: incorrect display, false format detection, picture position failure, blur, or judder.
INFORMATION English Media Player Supported Format Media Player Photo Media Format JPEG File Extension .jpg .jpeg Video codec Audio codec JPEG USB/ Network SD card yes yes yes no – MPO .mpo MPO Note USB/SD card Data compatibility: JPEG Exif ver 2.2 Maximum viewable resolution: •JPEG 12000 × 9000 (Baseline) 1024 × 768 (Progressive) Maximum number of files: 1000 / folder Network Data compatibility: JPEG Exif ver 2.
English INFORMATION Media Player Movie Music Media Format File Extension Video codec Audio codec USB/ Network SD card MOV .mov H.264 (MPEG-4 AVC) MPEG-1/2 Layer3 MPEG-4 part2 MPEG-2/4 LC-AAC MPEG-4 HE-AAC yes no MP4 .mp4 .m4v H.264 (MPEG-4 AVC) MPEG-1/2 Layer3 MPEG-4 part12,14 MPEG-4 HE-AAC yes no H.264 (MPEG-4 AVC) MPEG-2/4 LC-AAC yes yes ASF .asf .wmv VC-1 (WMV9) WMA7/8/9 Std WMA9 Pro yes no DivX .divx .div DivX 3,4,5,6 yes no Xvid .
INFORMATION English 3D Support Format (HDMI) Resolution Aspect ratio V.Frequency H.Frequency 720 × 480p 16:9 59.940/60.000 Hz 31.469/31.500 kHz Pixel Clock Frequency 54.000/54.054 MHz 27.000/27.027 MHz 720 × 576p 16:9 50.000 Hz 31.250 kHz 27.000 MHz 3D Structure Side by Side (Full) Side by Side (Half) Top and Bottom Side by Side (Full) Side by Side (Half) Top and Bottom 1280 × 720p 16:9 59.940/60.000 Hz 90.0/89.91 kHz 148.352/148.500 MHz Frame Packing 44.955/45.000 kHz 74.176/74.
English INFORMATION 3D Support Format (DTV) Video Format Aspect ratio V.Fraquency 3D Structure 480i, 480p 16:9 59.940/60.000 Hz Side by Side (Half) 576i, 576p 16:9 50.000 Hz Side by Side (Half) 720p 16:9 59.940/60.000 Hz Side by Side (Half) 50.000 Hz Side by Side (Half) 59.940/60.000 Hz Side by Side (Half) 50.000 Hz Side by Side (Half) 24.000 Hz Side by Side (Half) 30.000 Hz Side by Side (Half) 50.000 Hz Side by Side (Half) 59.940/60.
INFORMATION English Licence information • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • HDMI, the HDMI logo, and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. • This product contains Adobe® Flash® Player software under license from Adobe Systems Incorporated. Copyright© 1995-2009 Adobe Systems Incorporated. All rights reserved.
English INFORMATION EU Conformity Statement This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA TELEVISION CENTRAL EUROPE Sp. z o.o., ul. Pokoju 1 Biskupice Podgórne 55-040 Kobierzyce, Poland This product is labeled with the CE Mark in accordance with the related European Directives, notably Low Voltage Directive 2006/95/EC, Electromagnetic Compatibility Directive 2004/108/EC and RoHS Directive 2011/65/EU.
INFORMATION Important information for 3D viewing • Be careful not to pinch your fingers in the hinge of the 3D glasses. Available 3D glasses : - For 58L/58M9363: Toshiba FPT-AG03 (2 pcs supplied) CAUTION ● This product contains a coin/button cell battery. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
English INFORMATION • For 58L/58M9363: Use the 3D glasses in the following viewing angle. Otherwise, you may not see the correct 3D image. Effective viewing angle: within 30° horizontal, 20° vertical • For 65L/65M/84L/84M9363: For optimal 3D effect and to avoid eye fatigue it is important that you properly select your viewing position. The best viewing position is at the indicated viewing distance with your eyes at the same level as the centre of the display as shown below.
INFORMATION English Specifications and accessories Receiving systems DVB-T Broadcast systems/ Broadcast systems/channels channels UK UHF 21-68 PAL-I UHF UK21-UK69 France VHF 05-10 PAL-B/G UHF E21-E69 (VHF 01-05) VHF E2-E12, UHF 21-69 S1-S41 Germany VHF 05-12 SECAM-L UHF F21-F69 UHF 21-69 VHF F1-F10, B-Q Austria VHF 05-12 SECAM-D/K UHF R21-R69 UHF 21-69 VHF R1-R12 Switzerland VHF 05-12 UHF 21-69 Italy VHF 05-12 (D,E,F,G,H,H1,H2) UHF 21-69 Spain UHF 21-69 Netherlands VHF 05-12 UHF 21-69 Greece VHF 05-12 UHF
© TOSHIBA Television Central Europe Sp. z o.o. All rights reserved. Reproduction in whole or part without written permission is strictly prohibited. TOSHIBA Television Central Europe Sp. z o.o. ul.
