User’s Manual L500/L505/L500D/L505D computers.toshiba-europe.
L500/L505/L500D/L505D Copyright © 2009 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
L500/L505/L500D/L505D ExpressCard is a trademark of PCMCIA. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. LabelFlash™ is a trademark of YAMAHA Corporation. Photo CD is a trademark of Eastman Kodak. Wi-Fi is a registered trademark of the Wi-Fi Alliance. Memory Stick, Memory Stick PRO, Memory Stick PRO Duo and i.LINK are registered trademarks of SONY Corporation. Secure Digital and SD are trademarks of SD Card Association.
L500/L505/L500D/L505D CE compliance This product is labelled with the CE Mark in accordance with the related European Directives, notably Electromagnetic Compatibility Directive 2004/108/EC for the notebook and the electronic accessories including the supplied power adapter, the Radio Equipment and Telecommunications Terminal Equipment Directive 1999/5/EC in case of implemented telecommunication accessories and the Low Voltage Directive 2006/95/EC for the supplied power adapter.
L500/L505/L500D/L505D Furthermore, for general safety reasons, the use of this product in environments with explosive atmospheres is not permitted. Following information is only for EU-member states: Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be separated at the recycling centres.
L500/L505/L500D/L505D Disposing of the computer and the computer’s batteries ■ Discard this computer in accordance with applicable laws and regulations. For further information, contact your local government. ■ This computer contains rechargeable batteries. After repeated use, the batteries will finally lose their ability to hold a charge and you will need to replace them. Under certain applicable laws and regulation, it may be illegal to dispose of old batteries by placing them in the trash.
L500/L505/L500D/L505D Following information is only for Turkey: ■ Compliant with EEE Regulations: Toshiba meets all requirements of Turkish regulation 26891 “Restriction of the use of certain hazardous substances in electrical and electronic equipment”. ■ The number of possible pixel failures of your display is defined according to ISO 13406-2 standards. If the number of pixel failures is less than this standard, they will not be counted as defect or failure.
L500/L505/L500D/L505D Optical disc drive safety instructions ■ The drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure ■ To prevent direct exposure to the laser beam, do not try to open the enclosure.
L500/L505/L500D/L505D HLDS GT20N/GT20F Location of the required label COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J. MANUFACTURED Hitachi-LG Data Storage, Inc. 22-23, Kaigan 3-chome, Minato-Ku, Tokyo, 108-0022 Japan Toshiba Samsung TS-L633C/TS-L633Y Location of the required label PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPLY WITH DHHS RULES 21 CFR CHAPTER 1, SUBCHAPTER J, APPLICABLE AT THE DATE OF MANUFACTURE.
L500/L505/L500D/L505D International precautions CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.” To prevent direct exposure to the laser beam, do not try to open the enclosure.
L500/L505/L500D/L505D OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1. VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
L500/L505/L500D/L505D Table of Contents Preface General Precautions Chapter 1 Introduction Equipment checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3 Special features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-8 TOSHIBA Value Added Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L500/L505/L500D/L505D Sound system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the web camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using TOSHIBA Web Camera Application . . . . . . . . . . . . . . . . . . . . Using TOSHIBA Face Recognition . . . . . . . . . . . . . . . . . . . . . . . . . . Wireless communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LAN . . . . . . . . . . . . . . . . . . . . . .
L500/L505/L500D/L505D Chapter 10 Disclaimers Appendix A Specifications Environmental requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Appendix B Display Controller Display controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1 Appendix C Wireless LAN Card Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1 Radio Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L500/L505/L500D/L505D Preface Congratulations on your purchase of the TOSHIBA L500/L505/L500D/ L505D computer. This powerful notebook computer provides excellent expansion capability, includes multimedia functionality, and is designed to provide years of reliable, high-performance computing. This manual tells how to set up and begin using your L500/L505/L500/ L500D computer.
L500/L505/L500D/L505D Chapter 7, HW Setup and Passwords, explains how to configure the computer using the HW Setup program. It also tells how to set a password. Chapter 8, Optional Devices, describes the optional hardware available. Chapter 9, Troubleshooting, provides helpful information on how to perform some diagnostic tests, and suggests courses of action if the computer doesn’t seem to be working properly. Chapter 10 Disclaimers, provides Legal Footnotes information related to your computer.
L500/L505/L500D/L505D Display S ABC Names of windows or icons or text generated by the computer that appear on its display screen are presented in the type face you see to the left. Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below. Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment. Please read.
L500/L505/L500D/L505D General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
L500/L505/L500D/L505D ■ Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters. ■ Extreme heat, cold, or humidity. ■ Liquids and corrosive chemicals. Stress injury Carefully read the Instruction Manual for Safety and Comfort. It contains information on the prevention of stress injuries to your hands and wrists that can be caused by extensive keyboard use. Heat injury ■ Avoid prolonged physical contact with the computer.
L500/L505/L500D/L505D xx User’s Manual
L500/L505/L500D/L505D Chapter 1 Introduction This chapter provides an equipment checklist, and it identifies the computer’s features, options and accessories. Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.
L500/L505/L500D/L505D Software The following Windows operating system and utility software are pre-installed.
L500/L505/L500D/L505D Features This computer incorporates the following features and benefits: Processor Built-in The processor type varies depending on model. To check which type of processor is included in your model, open the TOSHIBA PC Diagnostic Tool Utility by clicking Start -> All programs -> TOSHIBA -> Utilities -> PC Diagnostic Tool.
L500/L505/L500D/L505D Video RAM Video RAM depends on the model you purchased. Mobile Intel® GM45 Express Chipset model/ Mobile Intel® GL40 Express Chipset model: Video RAM capacity shares with main memory, and the proportion depends on Dynamic Video Memory Technology.
L500/L505/L500D/L505D Optical disc drive Your computer is equipped with a full-size DVD Super Multi drive module that lets you run CDs or DVDs without using an adaptor.
L500/L505/L500D/L505D Pointing Device Built-in Touch Pad The integrated Touch Pad and control buttons in the palm rest allow control of the on-screen pointer and support functions such as the scrolling of windows. Power Battery pack The computer is powered by one rechargeable lithium-ion battery pack. RTC battery The internal RTC battery backs up the Real Time Clock (RTC) and calendar. AC adaptor The AC adaptor provides power to the system and recharges the batteries when they are low.
L500/L505/L500D/L505D Multimedia Sound system The integrated sound system provides support for the computer’s internal speakers and microphone, also allowing an external microphone and headphones to be connected via the appropriate jacks. Web Camera Web Camera is a device that allows you to record video or take photographs with your computer. You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger.
L500/L505/L500D/L505D ■ The transmission speed over the wireless LAN, and the distance over which the wireless LAN can reach, may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, client design and software/hardware configurations. The transmission rate described is the theoretical maximum speed as specified under the appropriate standard - the actual transmission speed will be lower than the theoretical maximum speed.
L500/L505/L500D/L505D HDD automatic power off * This feature automatically cuts off power to the hard disk drive when it is not accessed for a specified time, with power being restored when the hard disk drive is next accessed. This can be specified in the Power Options. System automatic Sleep/Hibernation Mode * This feature automatically shuts down the system into either Sleep Mode or Hibernation Mode when there is no input or hardware access for a specified time.
L500/L505/L500D/L505D Hibernation Mode This feature lets you turn off the power to the computer without exiting from your software. The contents of main memory are automatically saved to the hard disk drive so that when you next turn the power on again, you can continue working right where you left off. Refer to the Turning off the power section in Chapter 3, Getting Started, for more details.
L500/L505/L500D/L505D Utilities and Applications This section describes the pre-installed utilities that come with the computer and details how to start them. For further information on their operation, please refer to each utility’s online manual, help files or README.TXT file. Bluetooth Stack for Windows by Toshiba This software enables communication between the computer and external Bluetooth devices such as printers and mobile phones.
L500/L505/L500D/L505D Windows Mobility Center This section describes the Windows Mobility Center. Mobility Center is a utility for accessing several mobile PC settings quickly in one window. A default maximum of eight tiles are provided by the operating system, and the additional two tiles are added to your Mobility Center. ■ Lock Computer: This can be used to lock your computer without turning it off. This has the same function as the Lock button at the bottom of the right pane in the start menu.
L500/L505/L500D/L505D Options You can add a number of options to make your computer even more powerful and convenient to use. The following options are available: User’s Manual Memory expansion A 1GB, 2GB or 4GB memory module (PC3-8500/PC2-6400) can easily be installed in the computer. Battery Pack An additional battery pack can be purchased for use as either a spare or replacement. Please refer to Chapter 6, Power and Power-up Modes for futher information.
L500/L505/L500D/L505D 1-14 User’s Manual
L500/L505/L500D/L505D Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed The following figure shows the computer’s front with its display panel in the closed position. 1 3 2 1. Wireless communication 2. Volume control 3.
L500/L505/L500D/L505D Keep foreign metal objects, such as screws, staples and paper clips, out of the Bridge media slot. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury. Left side The following figure shows the computer’s left side. 1 2 1. Cooling vents 2. External monitor port 3. LAN jack *4. HDMI out port 3 4 5 6 7 5. eSATA/USB combo port 6. Microphone jack 7. Headphone jack * Depending on the model you purchased.
L500/L505/L500D/L505D HDMI out port HDMI out port can connect with Type A connector HDMI cable. One HDMI cable can send video and audio signals. (Included with some models. eSATA/USB combo port This Universal Serial Bus port, which complies to the USB 2.0 standard, is provided on the left hand side of the computer. This port has eSATA (External Serial ATA) function. Microphone jack A 3.
L500/L505/L500D/L505D DC IN 19V jack The AC adaptor connects to this jack in order to power the computer and charge its internal batteries. Please note that you should only use the model of AC adaptor supplied with the computer at the time of purchase - using the wrong AC adaptor can cause damage to the computer. Security lock slot A security cable can be attached to this slot and then connected to a desk or other large object in order to deter theft of the computer.
L500/L505/L500D/L505D 1 2 User’s Manual Battery safety lock Slide this latch into its “Unlock” position in order to release the battery pack and prepare for removal. Battery release latch Slide and hold this latch into its “Unlock” position in order to release the battery pack. For more detailed information on removing the battery pack please refer to Chapter 6, Power and Power-up Modes. Cooling vents The computer’s cooling vents help keep the processor from overheating.
L500/L505/L500D/L505D Front with the display open This section shows the computer with the display panel open. In order to open the display, lift the display panel up and position it at a comfortable viewing angle for you. 11 10 9 1 8 3 2 7 3 4 5 6 1. Display screen 2. Power button 3. Stereo speakers 4. Touch Pad 5. Touch Pad control buttons 6. System Indicators *7. Front operational panel 8. Display hinge *9. Microphone *10. Web camera *11. Web camera LED * Depending on the model you purchased.
L500/L505/L500D/L505D Power button Press this button to turn the computer’s power on and off. Stereo speakers The speakers emit sound generated by your software as well as audio alarms, such as low battery condition, generated by the system. Keep foreign objects out of the speakers. Never allow metal objects, such as screws, staples and paper clips, to enter the computer or keyboard.
L500/L505/L500D/L505D Web Camera The Web Camera is a device that allows you to record video or take photographs with your computer. You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. Toshiba Web Camera Application will help you to add various video effects to your video or photograph. The web camera also enables the transmission of video and use of video chat via the internet using specialized applications.
L500/L505/L500D/L505D Next button Press this button to advance to the next track, chapter or data. Mute button Press this button to turn the sound on and off. System indicators The LED system indicators for specific computer operations glow when those operations are in progress. Figure 2-7 System indicators User’s Manual DC IN The DC IN indicator normally glows green when power is being correctly supplied from the AC power adaptor.
L500/L505/L500D/L505D Keyboard indicators The following figures show the positions of the CAPS LOCK indicator and the NUM LOCK indicator. Figure 2-8 Keypad indicators 2-10 CAPS LOCK This indicator glows green when letter keys are locked into their uppercase format. NUM LOCK When the Number Lock indicator lights green, you can use the numeric functions of the right side of the keyboard. When switched off, the keys alternate commands will be enabled.
L500/L505/L500D/L505D Optical disc drive The computer is configured with a DVD Super Multi drive. A Serial ATA interface controller is used for 12cm (4.72") and 8cm (3.15") CD/DVD operation. When the computer is accessing a CD/DVD, an indicator on the drive glows. For further information on loading and unloading discs, please refer to the Writing CD/DVD on DVD Super Multi drive section in Chapter 4, Operating Basics.
L500/L505/L500D/L505D DVDs ■ DVD-R, DVD+R, DVD-R (Dual Layer) and DVD+R (Double Layer) discs can be written only once. The recorded data cannot be erased or changed. ■ DVD-RW, DVD+RW and DVD-RAM discs can be recorded more than once. Some types and formats of DVD-R (Dual Layer) and DVD+R (Double Layer) discs may be unreadable. DVD Super Multi drive The full-size DVD Super Multi drive module allows you to record data to recordable CDs and DVDs as well as run 12cm (4.72") and 8cm (3.
L500/L505/L500D/L505D AC adaptor The AC adaptor can automatically adjust to any voltage ranging from 90 to 264 volts and to a frequency of either 47 or 63 hertz, enabling you to use this computer in almost any country/region. The adaptor converts AC power to DC power and reduces the voltage supplied to this computer. To recharge the battery, simply connect the AC adaptor to a power source and to the computer. Please refer to Chapter 6, Power and Power-up Modes for further information.
L500/L505/L500D/L505D 2-14 User’s Manual
L500/L505/L500D/L505D Chapter 3 Getting Started ■ If the battery pack is not pre-installed in the computer that you purchased, please install the battery pack before you start using the computer. Please refer to Chapter 6, Replacing the battery pack, for further information about installing the battery pack. ■ All users should be sure to read the section Starting up for the first time.
L500/L505/L500D/L505D Connecting the AC adaptor Attach the AC adaptor when you need to charge the battery or you want to operate from AC power. It is also the fastest way to get started, because the battery pack will need to be charged before you can operate from battery power. The AC adaptor can be connected to any power source supplying from 90 to 264 volts and 47 or 63 hertz. For details on using the AC adaptor to charge the battery pack, refer to Chapter 6, Power and Power-up Modes.
L500/L505/L500D/L505D 1. Connect the power cord to the AC adaptor. Figure 3-1 Connecting the power cord to the AC adaptor (2-pin plug) Figure 3-2 Connecting the power cord to the AC adaptor (3-pin plug) Either a 2-pin or 3-pin adaptor/cord will be included with the computer depending on the model. 2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack on the right side of the computer. Figure 3-3 Connecting the adaptor to the computer 3.
L500/L505/L500D/L505D Opening the display The display panel can be opened to a wide range of angles for optimal viewing. While holding down the palm rest with one hand so that the main body of the computer is not raised, slowly lift the display panel - this will allow the angle of the display panel to be adjusted to provide optimum clarity. Figure 3-4 Opening the display Use reasonable care when opening and closing the display panel. Opening it vigorously or slamming it shut could damage the computer.
L500/L505/L500D/L505D Turning on the power This section describes how to turn on the power - the Power indicator light will then indicate the status. Please refer to the Monitoring of power condition section in Chapter 6, Power and Power-up Modes, for more information. ■ After you turn on the power for the first time, do not turn it off until you have set up the operating system. Please refer to the section Starting up for the first time for more information.
L500/L505/L500D/L505D Turning off the power The power can be turned off in one of three modes, either Shut Down Mode, Hibernation Mode or Sleep Mode. Shut Down Mode When you turn off the power in Shut Down Mode no data will be saved and the computer will boot to the operating system’s main screen the next time it is turned on. 1. If you have entered data, either save it to the hard disk drive or to other storage media. 2.
L500/L505/L500D/L505D Benefits of Hibernation Mode The Hibernation Mode feature provides the following benefits: ■ Saves data to the hard disk drive when the computer automatically shuts down because of a low battery condition. ■ You can return to your previous working environment immediately when you turn on the computer. ■ Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System Hibernate feature.
L500/L505/L500D/L505D Sleep Mode If you have to interrupt your work, you are able to turn off the power without exiting from your software by placing the computer into Sleep Mode. In this mode data is maintained in the computer’s main memory so that when you turn on the power again, you can continue working right where you left off. When you have to turn off your computer aboard an aircraft or in places where electronic devices are regulated or controlled, always completely shut down the computer.
L500/L505/L500D/L505D Executing Sleep Mode You can also enable Sleep Mode by pressing FN + F3 - please refer to Chapter 5, The Keyboard, for further details. You can enter Sleep Mode in one of three ways: ■ Click Start then click the arrow in the power management button and select Sleep from the menu. ■ Close the display panel. Please note that this feature must be enabled within the Power Options (to access it, click Start -> Control Panel -> System and Security -> Power Options).
L500/L505/L500D/L505D System Recovery Options A hidden partition is allocated on the hard disk drive for the System Recovery Options. This partition stores files which can be used to repair the system in the event of a problem. The System Recovery Options feature will be unusable if this partition is deleted. System Recovery Options The System Recovery Options feature is installed on the hard disk when shipped from the factory.
L500/L505/L500D/L505D Creating Optical Recovery Discs This section describes how to create Recovery Discs. ■ Be sure to connect the AC adaptor when you create Recovery Discs. ■ Be sure to close all other software programs except the TOSHIBA Recovery Media Creator. ■ Do not run software such as screen savers which can put a heavy load on the CPU. ■ Operate the computer at full power. ■ Do not use power-saving features. ■ Do not write to the disc when the anti-virus software is running.
L500/L505/L500D/L505D Restoring the pre-installed software from your created Recovery Discs If the pre-installed files are damaged, you are able to either use the Recovery Discs you have created to restore the computer to the state it was in when you originally received it. To perform this restoration, follow the steps below: When the sound mute feature has been activated by pressing the FN + ESC key, be sure to disable this to allow sounds to be heard before starting the restore process.
L500/L505/L500D/L505D When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost. 1. Turn off your computer. 2. While holding down 0 (zero) key on the keyboard, turn on your computer. A menu will be displayed from which you should follow the on-screen instructions.
L500/L505/L500D/L505D 3-14 User’s Manual
L500/L505/L500D/L505D Chapter 4 Operating Basics This chapter describes the basic operations of your computer and highlights the precautions that should be taken when using it. Using the Touch Pad To use the Touch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go. 1 2 1. Touch Pad 2.
L500/L505/L500D/L505D Touch Pad Gesture There are four convenient gestures that make users operate the system easier and faster. ChiralMotion You can scroll vertically and horizontally. To enable these features, select the Enable vertical scrolling and Enable horizontal scrolling check boxes. Click on the window or item you wish to scroll and slide your finger upwards or downwards along the right edge of the TouchPad to scroll vertically.
L500/L505/L500D/L505D You can also tap the Touch Pad to perform functions similar to those of the left button on a standard mouse. Click: Tap once Double-click: Tap twice Drag and drop: Tap to select the item(s) you want to move, leave your finger on the Touch Pad after the second tap and then move the item(s) to their new destination. Using the optical disk drive The full-size drive provides high-performance execution of CD/DVD-ROM-based programs. You can run either 12 cm (4.72") or 8 cm (3.
L500/L505/L500D/L505D 2. Grasp the disc tray gently and pull until it is fully opened. Figure 4-3 Pulling the disc tray open 3. Lay the CD/DVD, label side up, in the disc tray. Figure 4-4 Inserting a CD/DVD When the disc tray is fully opened, the edge of the computer will extend slightly over the area where you insert the media. Therefore, when loading a CD or DVD, you will need to turn it slightly at an angle when you place it in the disc tray.
L500/L505/L500D/L505D 4. Press the center of the CD/DVD gently until you feel it click into place on the center spindle. The disc should be slightly below the top of the spindle and flush with the spindle base. 5. Press the center of the disc tray in order to close it - the tray will click into place when it is locked.
L500/L505/L500D/L505D How to remove a CD/DVD when the disc tray will not open Pressing the eject button will not open the disc tray when the computer is turned off although, in these circumstances, you can open the tray by inserting a slender object such as a straightened paper clip about 15mm into the eject hole just to the right of the drive’s eject button. 1 1. Eject hole Figure 4-6 Manual release with the eject hole You must ensure that you turn off the power before you use the eject hole.
L500/L505/L500D/L505D Writing CD/DVD on DVD Super Multi drive The optical drive installed on this computer cannot write multiple sessions on DVD-R Dual Layer disc sessions. Once a disc has been written to once, it will be finalized. Once finalized, no further writing to the disc will be possible regardless of what portion of the total disc capacity was used.
L500/L505/L500D/L505D Before writing or rewriting ■ Based on TOSHIBA’s limited compatibility testing, we suggest the following manufacturers of CD-R, CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW or DVD-RAM media, however, it must be noted that disc quality can affect write or rewrite success rates. Please also be aware that in no event does TOSHIBA guarantee the operation, quality or performance of any disc. CD-R: TAIYO YUDEN CO., Ltd. MITSUBISHI KAGAKU MEDIA CO., LTD.
L500/L505/L500D/L505D DVD-RW: DVD Specifications for Recordable Disc for Version 1.1 or version 1.2 Victor Company of Japan, Ltd. (JVC) (for 2x, 4x and 6x speed media) MITSUBISHI KAGAKU MEDIA CO., LTD. (for 2x, 4x and 6x speed media) DVD+RW: MITSUBISHI KAGAKU MEDIA CO., LTD. (for 2.4x, 4x and 8x speed media) DVD-RAM: DVD Specifications for DVD-RAM Disc for Version 2.0, Version 2.1 or Version 2.2 Matsushita Electric Industrial Co.,Ltd. (for 3x and 5x speed media) Hitachi Maxell,Ltd.
L500/L505/L500D/L505D ■ Data deleted/erased from a CD-RW, DVD-RW, DVD+RW or DVD-RAM disc cannot be recovered. You must check the content of the disc carefully before you delete it, making sure that if multiple drives that can write data to discs are connected, you do not delete data from the wrong one.
L500/L505/L500D/L505D When writing or rewriting Please observe the following points while you write or rewrite data to CD-R, CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW or DVD-RAM media: ■ Always copy data from the hard disk drive to the optical media - do not use the cut-and-paste function as the original data will be lost if there is a write error. ■ Do not perform any of the following actions: ■ Change users in the Windows 7 operating system.
L500/L505/L500D/L505D Given the technological limitations of current optical disc writing drives, you may experience unexpected writing or rewriting errors due to disc quality or problems with hardware devices. In view of this, it is good practice to make two or more copies of important data, in case of any undesired change or loss of the recorded contents.
L500/L505/L500D/L505D ■ When you back up a DVD disc, be sure that the source drive supports recording to DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW media - if this is not the case then the source disc might not be backed up correctly. ■ When you back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW disc, be sure to use the same type of disc. ■ You cannot partially delete any data written to a CD-RW, DVD-RW or DVD+RW disc.
L500/L505/L500D/L505D ■ Do not playback DVD discs Video while watching or recording television programs using other applications. Doing so may cause DVD Video playback or television program recording errors. In addition, if prescheduled recording starts during DVD Video playback it may cause DVD Video playback or television program recording errors. Please view DVD Video during times when there is no recording prescheduled. ■ The resume function cannot be used with some discs on the “TOSHIBA DVD PLAYER”.
L500/L505/L500D/L505D 3. In order to protect copyrights, the Windows Print Screen function is disabled when “TOSHIBA DVD PLAYER” is running. 4. (Print Screen functions are disabled even when running other applications besides “TOSHIBA DVD PLAYER” and when “TOSHIBA DVD PLAYER” is minimized.) Please close the “TOSHIBA DVD PLAYER” to use the Print Screen function. 5. Carry out the installation/uninstallation of the “TOSHIBA DVD PLAYER” under a user account with administrator rights. 6.
L500/L505/L500D/L505D Media care This section provides tips on protecting data stored on your CD’s, DVD’s and floppy diskettes. Handle your media with care. Following the simple precautions listed below will increase the lifetime of your media and protect the data stored on it. CD/DVDs 1. Store your CD’s and DVD’s in the containers they originally came in to protect them and keep them clean. 2. Do not bend the CD’s or DVD’s. 3.
L500/L505/L500D/L505D 8. Data may be lost if the floppy diskette is twisted, bent, or exposed to direct sunlight, extreme heat or cold. 9. Do not place heavy objects on your floppy diskettes. 10. Do not eat, smoke, or use items such as erasers near your floppy diskettes as foreign particles inside the jacket of the floppy diskette can damage the magnetic surface. 11. Magnetic energy can destroy the data on your floppy diskettes.
L500/L505/L500D/L505D When you first launch the Realtek Audio Manager, you will see following device tabs. Speakers is the default output device. Microphone is the default input device. To change the default device, click the Set Default Device button under the chosen device tab. ■ Speakers is the default output device. Select it when using the internal speakers or headphones.
L500/L505/L500D/L505D Using the web camera Some models are equipped with a Web Camera. Web Camera is a device that allows you to record video or take photographs with your computer. You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. Toshiba Web Camera Application will help you to add various video effects to your video or photograph.
L500/L505/L500D/L505D Using TOSHIBA Web Camera Application TOSHIBA Web Camera Application is pre-configured to start when you turn on Windows 7 ; if you need to restart it go to Start -> All Programs -> TOSHIBA -> Utilities -> Web Camera Application. 1. Capture Still Images 2. Open/Close Preview Area 3. Delete Recorded File 4. Video Recording 5. Camera Resolution 6.
L500/L505/L500D/L505D Using TOSHIBA Face Recognition TOSHIBA Face Recognition uses a face verification library to verify the face data of users when they log in Windows. The user can thus avoid having to enter a password or the like, which makes the login process easier. This software is preinstalled with some models. ■ TOSHIBA Face Recognition does not guarantee the correct identification of a user.
L500/L505/L500D/L505D 2. Click the Register face button in the Management screen. The Registration screen is displayed. ■ If you wish to practice, click on the Next button in the Registration screen. ■ If you do not wish to practice, click on the Skip button in the Registration screen. 3. Click the Next button to start the guide. 4. First, take a picture while moving your neck slightly to the left and right. 5. Now take a picture while moving your neck down and up.
L500/L505/L500D/L505D How to Delete the Face Recognition Data Delete image data, account information, and personal record data created during registration. To delete the Face Recognition Data, follow the steps as described below: 1. To launch this utility, click Start -> All Programs -> TOSHIBA -> Utilities -> Face Recognition. The Management screen is displayed. 2. Select a user which is deleted in the Management screen. 3. Click the Delete button. “You are about to delete the user data.
L500/L505/L500D/L505D 1:1 Mode Login screen 1. Turn on the computer. 2. The Select Tiles screen will be displayed. 3. Select Start face recognition ( 4. 5. 6. 7. ). The Select Account screen will be displayed. Select the account, and click the Arrow button. “Please face the camera” will be displayed. Verification will be performed. If the authentication is successful, the image data taken in step 6 will be faded in and placed over one another.
L500/L505/L500D/L505D The transmission speed over the wireless LAN, and the distance over which the wireless LAN can reach, may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, client design and software/hardware configurations. The transmission rate described is the theoretical maximum speed as specified under the appropriate standard - the actual transmission speed will be lower than the theoretical maximum speed. Setting 1.
L500/L505/L500D/L505D Security Two advanced security mechanisms ensure a high level of security: ■ Authentication prevents access to critical data and makes it impossible to falsify the origin of a message. ■ Encryption prevents eavesdropping and maintains link privacy.
L500/L505/L500D/L505D If you used the Taskbar to disable the wireless LAN, restart the computer or perform the following procedure to re-enable it: Click Start, open Control Panel, click System and Security, click Device Manager on System category, double-click Network Adapters, and right click the wireless device then choose Enable. ■ Do not use the Wireless LAN (Wi-Fi) or Bluetooth functionalities near a microwave oven or in areas subject to radio interference or magnetic fields.
L500/L505/L500D/L505D LAN cable types The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer’s default settings could cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures. If you are using Fast Ethernet LAN (100 megabits per second, 100BASE-TX), be sure to connect with a CAT5 cable or higher. You cannot use a CAT3 cable.
L500/L505/L500D/L505D Disconnecting the LAN cable Make sure the LAN Active indicator (amber LED) is out before you disconnect the computer from the LAN. To disconnect the LAN cable, follow the steps as detailed below: 1. Pinch the lever on the connector in the computer’s LAN jack and pull out the connector. 2. Disconnect the cable from the LAN hub or router in the same manner. Check with your LAN administrator and hardware or software vendor before disconnecting from the hub.
L500/L505/L500D/L505D Moving the computer While the computer is designed for rugged durability you should exercise a few simple precautions when moving it in order to help ensure trouble-free operation. ■ Make sure all disk/disc activity has ended before moving the computer check that the HDD and other indicators on the front of the computer are off. ■ If a CD or DVD is in the drive, remove it and make sure that the disc tray is securely closed. ■ Turn off (shut down) the computer.
L500/L505/L500D/L505D Chapter 5 The Keyboard The computer’s keyboard layouts are compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhanced keyboard functions can be performed on the computer. The number of keys available on your keyboard will depend on which country/region your computer is configured for, with keyboards being available for numerous languages.
L500/L505/L500D/L505D Function keys: F1 … F12 The function keys (not to be confused with the special FN key) are the twelve keys at the top of your keyboard - these keys function differently from other keys. F1 through F12 are called function keys because they execute programmed functions when pressed and, when used in combination with the FN key, those keys marked with icons also execute specific functions on the computer.
L500/L505/L500D/L505D Hot keys Hot keys (pressing FN + a function or ESC key) let you enable or disable certain features of the computer. Mute: Pressing FN + ESC turns the volume on and off. Lock: Pressing FN + F1 enters “Lock computer mode”. To restore your desktop, you need to log on again. Power Plan: Pressing FN + F2 changes the power settings. Sleep: Pressing FN + F3 switches the system to Sleep Mode. Hibernate: Pressing FN + F4 switches the system to Hibernation Mode.
L500/L505/L500D/L505D Brightness (Up): Pressing FN + F7 increases the computer’s display panel brightness in individual steps. Wireless: Pressing FN + F8 switches the active wireless devices. If no wireless communication device is installed, no dialog box will appear. Touch Pad: Pressing FN + F9 enables or disables the Touch Pad function. Zoom: Pressing FN + Space changes the display resolution.
L500/L505/L500D/L505D Windows special keys The keyboard provides two keys that have special functions in Windows: Windows Start Button activates the Start menu and the other, the application key, has the same function as the secondary mouse button. This key activates the Windows Start menu. This key has the same function as the secondary (right) mouse button.
L500/L505/L500D/L505D 5-6 User’s Manual
L500/L505/L500D/L505D Chapter 6 Power and Power-up Modes The computer’s power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power-up modes.
L500/L505/L500D/L505D Table 6-1 Power conditions continued Power on AC adaptor not connected Battery charge is above low battery trigger point • Operates • LED: Battery off DC IN off Battery charge is below low battery trigger point • Operates • LED: Battery flashes Amber DC IN off Battery charge is exhausted Computer goes into Sleep Mode and shuts down No battery installed • Cannot operate • LED: Battery off DC IN off Power off (no operation) Power indicators As shown in the below table, the Ba
L500/L505/L500D/L505D DC IN indicator Check the DC IN indicator to determine the power status with the AC adaptor connected - the following indicator conditions should be noted: Green Indicates the AC adaptor is connected and is correctly supplying power to the computer. No light Under any other conditions, the indicator does not light.
L500/L505/L500D/L505D ■ The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not remove the battery pack while the computer is in Sleep Mode. In this mode data is stored in memory, so if the computer loses power, it will be lost.
L500/L505/L500D/L505D Care and use of the battery pack The battery pack is a vital component of portable computing and, as such, taking proper care of it will help ensure a longer operating time on battery power as well as deliver a longer life for your battery pack. The instructions detailed in this section will help to ensure safe operation and maximum performance. Refer to the enclosed Instruction Manual for Safety and Comfort for detailed precautions and handling instructions.
L500/L505/L500D/L505D Procedures To recharge a battery pack while it is installed in the computer, connect the AC adaptor to the DC IN 19V jack and plug the other end into a working outlet - the Battery indicator will glow amber while the battery is being charged. Use only the computer connected to an AC power source or the optional TOSHIBA Battery charger to charge the battery pack. Never attempt to charge the battery pack with any other charger.
L500/L505/L500D/L505D In such cases you should follow the steps as detailed below: 1. Fully discharge the battery by leaving it in the computer with the power on until the system automatically turns itself off. 2. Connect the AC adaptor to the DC IN 19V jack of the computer, and to a wall outlet that is supplying power. 3. Charge the battery until the Battery indicator glows white. Repeat these steps two or three times until the battery recovers normal capacity.
L500/L505/L500D/L505D ■ Whether you close the display panel when you are not using the keyboard - closing the display saves power. ■ The environmental temperature - operating time decreases at low temperatures. ■ The condition of the battery terminals - you should always ensure the terminals stay clean by wiping them with a clean dry cloth before installing the battery pack.
L500/L505/L500D/L505D ■ Disconnect the AC adaptor when the battery is fully charged overcharging will make the battery hot and can shorten its operating life. ■ If you are not going to use the computer for more than eight hours, disconnect the AC adaptor. ■ Store spare battery packs in a cool dry place out of direct sunlight. Replacing the battery pack Please be aware that the battery pack is classified as a consumable item.
L500/L505/L500D/L505D 5. Slide the battery safety lock towards the release ( the battery release latch movable. ) position to make Figure 6-1 Releasing the battery pack (1) 6. Slide and hold the battery release latch (1) to disengage the battery pack and then remove it from the computer (2).
L500/L505/L500D/L505D To install a battery, follow the steps as detailed below: 1. Insert the battery pack as far as it will go into the computer (1). 2. Ensure that the battery pack is securely in place and the battery safety lock (2) is in its position. 1 2 Figure 6-3 Securing the battery pack 3. Turn your computer over.
L500/L505/L500D/L505D Supervisor password If you set a supervisor password, some functions will be restricted when a user logs on with the user password. To set a supervisor password: TOSHIBA Assist -> SECURE -> Supervisor password This utility lets you do the following: ■ Register or delete the supervisor password. ■ Specify restrictions for general users. Starting the computer by password If you have already registered a password, there is a way to start the computer: ■ Enter the password manually.
L500/L505/L500D/L505D Hot keys You can use the FN + F3 hot key to enter Sleep Mode or FN + F4 to enter Hibernation Mode - please refer to Chapter 5, The Keyboard for further details. Panel power on/off You can set up your computer so that power is turned off automatically when you close the display panel, and turned on again when you open it. Please note that this function is only available for Sleep Mode or Hibernation Mode, not for Shut Down Mode.
L500/L505/L500D/L505D 6-14 User’s Manual
L500/L505/L500D/L505D Chapter 7 HW Setup and Passwords This chapter explains how to use TOSHIBA HW Setup program to configure your computer and how to set passwords. HW Setup TOSHIBA HW Setup allows you to configure settings for General, Password, Display, Boot Priority, Keyboard, USB, LAN. If the supervisor password is set, access to the TOSHIBA HW Setup program can be prevented when the user password is used to log on to the computer.
L500/L505/L500D/L505D General This window displays the BIOS version and contains two buttons: Default Return all HW Setup values to the factory settings. About Display the HW Setup version. Setup This field displays BIOS Version and date. When finish BIOS update, please restart your computer and press F2 into BIOS setup manual and load BIOS default one time. Password User Password This option allows you to set or reset the user password for power on. Not Registered Changes or remove the password.
L500/L505/L500D/L505D 3. Click the OK button. If the character string you enter matches the registered password, the password option is reset and the display changes to: Not registered If they do not match, the following message appears. You must repeat step 1. Incorrect Password!!! If you enter the password incorrectly three times in a row, the computer will shut down. You will not be able to access the password option in the HW Setup.
L500/L505/L500D/L505D USB Legacy USB Support Use this option to enable or disable USB Legacy Emulation. If your operating system does not support USB, you can still use a USB mouse and keyboard by setting the USB Legacy Emulation item to enabled. Enabled Enables the USB Legacy Emulation. (Default) Disabled Disables the USB Legacy Emulation. LAN Wake-up on LAN This feature lets the computer’s power be turned on from shutdown when it receives a wake-up packet ( Magic packet ) from the LAN.
L500/L505/L500D/L505D Chapter 8 Optional Devices Optional devices can expand the computer’s capabilities and its versatility. This chapter describes the connection or installation of the following devices: To connect optional devices (such as USB device or External monitor) to the computer, be sure to check the shape and orientation of the connector before connecting.
L500/L505/L500D/L505D Bridge media slot The computer is equipped with a Bridge media slot that can accommodate some kinds of memory media with various memory capacities so that you can easily transfer data from devices, such as digital cameras and Personal Digital Assistants. ■ Keep foreign objects out of the Bridge media slot. Never allow metal objects, such as screws, staples and paper clips, to enter the computer or Keyboard.
L500/L505/L500D/L505D Memory media This section provides the important safety precautions in order to handle your memory media. Points to note about the SD/SDHC memory card SD/SDHC memory cards comply with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or playback of digital music.
L500/L505/L500D/L505D Additional memory module You can install additional memory into the computer in order to increase the amount of system memory that is available. This section describes how to install and remove optional memory modules. ■ You should place a mat beneath the computer in order to prevent the computer’s lid from becoming scratched or damaged when you are installing/replacing the memory module.
L500/L505/L500D/L505D Installing a memory module The computer contains slots for two memory modules, one positioned immediately over the other - the procedures are the same for installing either module. 1. Shut down the computer - make sure the Power indicator is off (refer to the Turning off the power section in Chapter 3, Getting Started if required). 2. Remove the AC adaptor and all cables and peripherals connected to the computer. 3. Turn the computer upside down and remove the memory module cover.
L500/L505/L500D/L505D ■ Never allow metal objects, such as screws, staples and paper clips, to enter the computer or keyboard. Foreign metal objects can create a short circuit, which can cause computer damage and fire, possibly resulting in serious injury. ■ Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. 5. Seat the memory module cover in place and secure it with one screw.
L500/L505/L500D/L505D Removing a memory module To remove the memory module, follow the steps as detailed below: 1. Set the computer to Boot Mode and turn its power off - make sure the Power indicator is off (refer to the Turning off the power section in Chapter 3, Getting Started if required). 2. Remove the AC adaptor and all cables and peripherals connected to the computer. 3.
L500/L505/L500D/L505D USB floppy diskette drive The USB floppy diskette drive accommodates either a 1.44MB or 720KB a 3 1/2" floppy diskette and connects to one of the computer’s USB ports. The USB floppy diskette drive is available only as an option. 1 2 3 1. USB connector 2. Disk-In-Use Indicator 3. Floppy diskette slot 4. Eject button 4 Figure 8-4 USB floppy diskette drive USB connector Insert this connector into one of the free USB ports of your computer.
L500/L505/L500D/L505D Using the USB floppy diskette drive The USB floppy diskette drive accommodates either a 1.44MB or 720KB floppy diskette and connects to one of the computer’s USB ports. Connecting the USB floppy diskette drive To connect the drive, plug the floppy diskette drive’s USB connector into one of the computer’s free USB ports. Make sure the connector is right side up and properly aligned with the socket. Do not try to force the connection; doing so can damage the connecting pins.
L500/L505/L500D/L505D 2. Click the Safely Remove Hardware icon on the Task Bar. 3. Click the USB floppy diskette drive device that you want to remove. 4. Carefully pull the floppy diskette drive’s USB connector out from within the computer’s USB port. eSATA (External Serial ATA) An device corresponding to eSATA function can be connected to the eSATA/USB combo port on the computer. Connecting the eSATA device To connect an eSATA device, follow the steps as detailed below: 1.
L500/L505/L500D/L505D Disconnecting an eSATA device When you have finished using an eSATA device, you can follow the procedures below in order to disconnect it: 1. Wait for the indicator light of an eSATA device to go out to make sure all activity has stopped. If you disconnect an eSATA device or turn off the power while the computer is accessing the drive you may lose data or damage an eSATA device or the drive. 2. Click the Safely Remove Hardware icon on the Windows Taskbar. 3.
L500/L505/L500D/L505D When you turn on the power, the computer will automatically recognize the monitor and determine whether it is a color or monochrome device. If you have problems on getting an image displayed on the correct monitor, you should use the FN + F5 hot key to change the display settings (if you then disconnect the external monitor before you turn the computer’s power off, be sure to press FN + F5 hot key again to switch to the internal display).
L500/L505/L500D/L505D For Intel 1. Click Start -> Control Panel -> Appearance and Personalization -> Personalization -> Display -> Adjust screen resolution. 2. Click the Advanced Setting button. The Generic PnP Monitor and Mobile Intel-> Arrandale Graphics Properties dialogue box opens. 3. Click the Graphics Properties button.
L500/L505/L500D/L505D 4. In the subsequent dialogue box, click Display -> Multiple Displays and then set up your television and notebook displays. For ATI 1. Click Start -> All Programs -> Catalyst Control Center -> CCC.
L500/L505/L500D/L505D 2. Click Graphics and select Desktop & Displays. 3. Click the triangle icon on TV and select the display mode for TV.
L500/L505/L500D/L505D Security lock A security locks enable you to anchor your computer to a desk or other heavy object in order to help prevent unauthorized removal or theft. The computer has a security lock slot on its right side into which you can attach one end of the security cable, while the other end attaches to a desk or similar object. The methods used for attaching security cables differ from product to product. Please refer to the instructions for the product you are using for more information.
L500/L505/L500D/L505D Chapter 9 Troubleshooting TOSHIBA have designed this computer for durability, however, should problems occur you are able to use the procedures detailed in this chapter to help determine the cause. All users should become familiar with this chapter as knowing what might go wrong can help prevent problems from occurring in the first place.
L500/L505/L500D/L505D Preliminary checklist You should always consider the simplest solution first - the items detailed in this checklist are easy to fix and yet may cause what appears to be a serious problem: ■ Make sure you turn on all peripheral devices before you turn on the computer - this includes your printer and any other external device you are using.
L500/L505/L500D/L505D Record your observations so you can describe them in detail to your reseller, dealer or service provider. Software Hardware The problems may be caused by your software or disk. If you cannot load a software package, the media may be damaged or the program might be corrupted. In these instances try loading another copy of the software if possible.
L500/L505/L500D/L505D System start-up When the computer does not start properly, check the following items: ■ Self test ■ Power Sources ■ Power-on Password Self test While booting up the computer, self test is executed automatically and the following will be displayed: TOSHIBA Leading Innovation>>> This message remains on the screen for a few seconds.
L500/L505/L500D/L505D Overheating power down If the processor’s temperature reaches an unacceptably high level with either setting, the computer will automatically shut down to prevent any damage - in this instance all unsaved data in memory will be lost. Problem Procedure Computer shuts down and DC IN indicator blinks green Leave the computer off until the DC IN indicator stops blinking.
L500/L505/L500D/L505D Battery If you suspect a problem with the battery, you should check the status of the DC IN indicator as well as the Battery indicator. Please refer to Chapter 6, Power and Power-up Modes, for more information on these indicators, together with general battery operation. Problem Procedure Battery doesn’t power the computer The battery may be discharged - connect the AC adaptor to recharge the battery.
L500/L505/L500D/L505D Real Time Clock Problem Procedure The following message is displayed on the LCD: RTC battery is low or CMOS checksum is inconsistent. Press [F2] key to set Date/Time. The RTC battery charge has become exhausted, you should set the date and time in within the BIOS setup screen through the following steps: 1. Press [F2] key. BIOS setup will boot up. 2. Press [F5]/[F6] to set the date in [System Date]. 3. Press [F5]/[F6] to set the time in [System Time].
L500/L505/L500D/L505D Internal display panel Apparent display panel problems may be related to the computer’s setup and configuration - please refer to Chapter 7, HW Setup and Passwords, for further information. Problem Procedure No display Press the FN + F5 hot keys to adjust the display priority, and to make sure it is not set for output to an external monitor. Markings appear on the These marks may have come from contact with LCD screen. the keyboard or Touch Pad while the display has been closed.
L500/L505/L500D/L505D Problem Procedure Slow performance The files on the hard disk drive may be fragmented - in this instance you should run the Disk Defragmentation utility to check the condition of your files and the hard disk drive. Please refer to the operating system’s documentation or online Help File for further information on operating and using the Disk Defragmentation utility.
L500/L505/L500D/L505D Problem Procedure Some CD/DVD/DVDs The computer’s software or hardware run correctly, but others configuration may be causing a problem. Ensure that these configurations match the requirements do not of the CD/DVD media (refer to the CD’s or DVD’s documentation if available).
L500/L505/L500D/L505D SD/SDHC memory card, miniSD/microSD Card For further information, please refer to Chapter 8, Optional Devices. Problem Procedure SD/SDHC memory card, miniSD/microSD Card error occurs Remove the SD/SDHC memory card, miniSD/ microSD Card from the computer and then reinsert it in order to ensure it is firmly connected. If the problem persists, then you should refer to the documentation supplied with your SD/SDHC memory card, miniSD/microSD Card for further information.
L500/L505/L500D/L505D MultiMediaCard For further information, please refer to Chapter 8, Optional Devices. Problem Procedure MultiMediaCard error occurs Remove the MultiMediaCard from the computer and then reinsert it in order to ensure it is firmly connected. If the problem persists, then you should refer to the documentation supplied with your MultiMediaCard for further information.
L500/L505/L500D/L505D User’s Manual Problem Procedure The mouse pointer moves too fast or too slow In this instance, you should initially try changing the speed setting within the Mouse Control utility. 1. To access this utility, click Start -> Control Panel -> Hardware and Sound -> Mouse icon. 2. Within the Mouse Properties window, click the Pointer Options tab. 3. Set the pointer speed as required and click OK.
L500/L505/L500D/L505D USB mouse Problem Procedure On-screen pointer does not respond to mouse operation In this instance the system might be busy. Try moving the mouse again after waiting a short while. Check to make sure the touch pad isn’t enabled. Remove the mouse from the computer and then reconnect it to a free USB port it in order to ensure it is firmly attached.
L500/L505/L500D/L505D USB device In addition to the information in this section, please also refer to the documentation supplied with your USB device. Problem Procedure USB device does not work Remove the USB device from the computer and then reconnect it to a free port in order to ensure it is firmly attached. Ensure that any required USB device drivers are properly installed - to achieve this you should refer to both the device documentation and the operating system documentation.
L500/L505/L500D/L505D Additional memory module Please also refer to Chapter 8, Optional Devices, for further information on installing and removing memory modules. 9-16 Problem Procedure If there is a memory malfunction, the Power indicator will repeatedly flash (on for 0.5 seconds, off for 0.5 seconds) in the following patterns: If there is an error in only slot A or no memory module is inserted in Slot A: amber twice, then green once. If there is an error in Slot B: amber once, then green twice.
L500/L505/L500D/L505D Sound system In addition to the information in this section, please also refer to the documentation supplied with your audio device. Problem Procedure No sound is heard Adjust the volume control. Turn the dial clockwise to increase the volume and turn the dial counter clockwise to decrease the volume. Check the software volume settings. Please check to see if Mute is turned to Off. Check to make sure the headphone connection is secure.
L500/L505/L500D/L505D External monitor Please also refer to Chapter 8, Optional Devices, and to the documentation supplied with your monitor for further information. Problem Procedure Monitor does not turn on After confirming that the monitor’s power switch is on, you should check the connections to make sure that the power cord/adaptor is firmly connected to the monitor and to a working power outlet. No display Try adjusting the contrast and brightness controls on the external monitor.
L500/L505/L500D/L505D LAN Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN HUB. Wake-up on LAN does not work Make sure the AC adaptor is connected. The Wake-up on LAN function consumes power even when the system is off. If problems persist, consult your LAN administrator. Wireless LAN If the following procedures do not restore LAN access, consult your LAN administrator.
L500/L505/L500D/L505D HDMI output function Problem Procedure No display Try adjusting the contrast and brightness controls on the television. Press the FN + F5 hot key in order to change the display priority and ensure that it is not set for the internal display panel only. If you are still unable to resolve the problem, contact your reseller, dealer or service provider.
L500/L505/L500D/L505D Chapter 10 Disclaimers This chapter states the Disclaimer(s) information applicable to TOSHIBA computers. CPU Central Processing Unit (“CPU”) Performance Disclaimer.
L500/L505/L500D/L505D 64-Bit Computing 64-bit processors are designed to take advantage of 32 and 64 bit computing. 64-bit computing requires that the following hardware and software requirements are met: ■ 64-bit Operating System ■ 64-bit CPU, Chipset and BIOS (Basic Input/Output System) ■ 64-bit Device drivers ■ 64-bit applications Certain device drivers and/or applications may not be compatible with a 64-bit CPU and therefore may not function properly.
L500/L505/L500D/L505D HDD drive capacity One Gigabyte (GB) means 109 = 1,000,000,000 bytes using powers of 10. The computer operating system, however, reports storage capacity using powers of 2 for the definition of 1 GB = 230 = 1,073,741,824 bytes, and therefore shows less storage capacity. Available storage capacity will also be less if the product includes one or more pre-installed operating systems, such as Microsoft Operating System and/or pre-installed software applications, or media content.
L500/L505/L500D/L505D External HDD Capacity One Gigabyte (GB) means 109 =1,000,000,000 bytes using powers of 10. A computer operating system, however, reports storage capacity using powers of 2 for the definition of 1GB=230=1,073,741,824 bytes, and therefore shows less storage capacity. Available storage capacity will also be less if the computer includes one or more pre-installed operating systems, pre-installed software applications, or media content. Actual formatted capacity may vary.
L500/L505/L500D/L505D Appendix A Specifications This appendix summarizes the computer’s technical specifications.
L500/L505/L500D/L505D A-2 User’s Manual
L500/L505/L500D/L505D Appendix B Display Controller Display controller The display controller interprets software commands into hardware commands that turn particular pixels on or off. The controller is an advanced Video Graphics Array (VGA) that provides Super VGA (SVGA) and Extended Graphics Array (XGA) support for the internal LCD and external monitors. A high-resolution external monitor connected to the computer can display up to 2048 horizontal and 1536 vertical pixels at up to 16M colors.
L500/L505/L500D/L505D B-2 User’s Manual
L500/L505/L500D/L505D Appendix C Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card Specifications User’s Manual Form Factor Mini Card Compatibility ■ IEEE 802.11 Standard for Wireless LANS ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance. The “Wi-Fi CERTIFIED” logo is a certification mark of the Wi-Fi Alliance.
L500/L505/L500D/L505D Radio Characteristics Radio Characteristics of Wireless LAN Cards may vary according to: ■ Country/region where the product was purchased ■ Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4GHz and 5GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment.
L500/L505/L500D/L505D Table Wireless IEEE 802.11 Channels Sets (Revision B and G) Frequency Range Channel ID 2400-2483.
L500/L505/L500D/L505D *1 *2 *3 *4 C-4 48 5240 52 5260 56 5280 60 5300 64 5320 100 5500*3 104 5520*3 108 5540*3 112 5560*3 116 5580*3 120 5600*3 124 5620*3 128 5640*3 132 5660*3 136 5680*3 140 5700*3 149 5745*3 US only*4 153 5765*3 US only*4 157 5785*3 US only*4 161 5805*3 US only*4 Factory-set default channels Check if these channels can be used in your country/region. These channels are available to A/B/G/N combo type only.
L500/L505/L500D/L505D Appendix D AC Power Cord and Connectors The AC input plug of power cord must be compatible with various international AC power outlets. Power cords need to meet the local standards and the specifications listed as below: Length: Minimum 1.7 meters Wire size: Minimum 0.75 mm2 Current rating: Minimum 2.
L500/L505/L500D/L505D For the United States and Canada, two pin plug configuration must be a 2-15P (250V) or 1-15P (125V) and three pin plug configuration must be 6-15P (250V) or 5-15P (125V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II. The following illustrations show the plug shapes for USA, Australia, Canada, United Kingdom, Europe, and China.
L500/L505/L500D/L505D Appendix E TOSHIBA PC Health Monitor The TOSHIBA Health Monitor software program monitors computer system functions such as power consumption, the cooling system and HDD Drop sensor. It alerts users of specific system conditions via pop-up messages. It also tracks the usages of the computer and related devices, logging the service relevant information on the computer’s hard disk drive.
L500/L505/L500D/L505D Starting the TOSHIBA PC Health Monitor The TOSHIBA PC Health Monitor can be started using the following methods: ■ Click Start -> All Programs -> TOSHIBA -> Utilities -> PC Health Monitor. ■ Click the icon in the notification area, then click the “Click here to enable TOSHIBA PC Health Monitor.” message when it is displayed.
L500/L505/L500D/L505D Appendix F If your computer is stolen Always take care of your computer and try to prevent it from being stolen. You are the owner of a valuable technical device, which may be highly attractive to thieves, so please do not leave it unattended in a public place. To further help protect against theft, security cables can be bought for use with your notebook when it is being used at home or in the office.
L500/L505/L500D/L505D TOSHIBA Theft Registration Send to: Fax number: TOSHIBA Europe GmbH Technical Service and Support Blumenstrasse 26 93055 Regensburg Germany +49 (0) 941 7807 921 Country stolen: Machine type: (e.g. Satellite L500) Model number: (e.g. PSL50EYXT) Serial number: (e.g.
L500/L505/L500D/L505D Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference.
L500/L505/L500D/L505D I/O: input/output IrDA: Infrared Data Association IRQ: interrupt request KB: kilobyte LAN: local area network LCD: liquid crystal display LED: light emitting diode MB: megabyte MMC: multi media card OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect RAM: random access memory RGB: red, green, and blue ROM: read only memory RTC: real time clock S/P DIF: Sony/Philips Digital Interface Format SDRAM: synchronous dynamic random acce
L500/L505/L500D/L505D alternating current (AC): Electric current that reverses its direction of flow at regular intervals. analog signal: A signal whose characteristics such as amplitude and frequency vary in proportion to (are an analog of) the value to be transmitted. Voice communications are analog signals. application: A group of programs that together are used for a specific task such as accounting, financial planning, spreadsheets, word processing and games.
L500/L505/L500D/L505D byte: The representation of a single character. A sequence of eight bits treated as a single unit; also the smallest addressable unit within the system. C cache memory: A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also L1 cache, L2 cache.
L500/L505/L500D/L505D components: Elements or parts (of a system) which make up the whole (system). Composite Video (YUV): A standard video signal used to transmit images, e.g. from a VCR to a TV. computer program: A set of instructions written for a computer that enable it to achieve a desired result. computer system: A combination of hardware, software, firmware, and peripheral components assembled to process data into useful information.
L500/L505/L500D/L505D disk drive: The device that randomly accesses information on a disk and copies it to the computer’s memory. It also writes data from memory to the disk. To accomplish these tasks, the unit physically rotates the disk at high speed past a read-write head. disk storage: Storing data on magnetic disk. Data is arranged on concentric tracks much like a phonograph record. display: A CRT, LCD, or other image producing device used to view computer output.
L500/L505/L500D/L505D enable: To turn on a computer option. See also disable. erase: See delete. escape: 1) A code (ASCII code 27), signaling the computer that what follows are commands; used with peripheral devices such as printers and modems. 2) A means of aborting the task currently in progress. escape guard time: A time before and after an escape code is sent to the modem which distinguishes between escapes that are part of the transmitted data, and escapes that are intended as a command to the modem.
L500/L505/L500D/L505D H hard disk: A storage device composed of a rigid platter or platters that can be magnetically coded with data. Hard disks hold much more information than diskettes and are used for long-term storage of programs and data. The primary (or only) hard disk in a computer is usually fixed, but some computers have secondary hard disks that are removable. By default, the hard disk is referred to as drive C. hard disk drive (HDD): An electromechanical device that reads and writes a hard disk.
L500/L505/L500D/L505D K K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power. See also byte and kilobyte. keyboard: An input device containing switches that are activated by manually pressing marked keys. Each keystroke activates a switch that transmits a specific code to the computer. For each key, the transmitted code is, in turn, representative of the (ASCII) character marked on the key.
L500/L505/L500D/L505D mode: A method of operation, for example, the Shut Down Mode, Sleep Mode or the Hibernation Mode. modem: Derived from modulator/demodulator, a device that converts (modulates) digital data for transmission over telephone lines and then converts modulated data (demodulates) to digital format where received. monitor: A device that uses rows and columns of pixels to display alphanumeric characters or graphic images. See also CRT.
L500/L505/L500D/L505D P PAL: PAL (Phase Alternating Line) is the dominant video and broadcasting standard in Europe. parity: 1) The symmetrical relationship between two parameter values (integers) both of which are either on or off; odd or even; 0 or 1. 2) In serial communications, an error detection bit that is added to a group of data bits making the sum of the bits even or odd. Parity can be set to none, odd, or even. password: A unique string of characters used to identify a specific user.
L500/L505/L500D/L505D Random Access Memory (RAM): Volatile memory that can be written to as well as read. Volatile here means that information in RAM is lost when you turn off your computer. This type of memory is used for your computer’s main memory. See also memory. Compare ROM. resolution: A measure of the sharpness of the images that can be produced by a printer or displayed on a screen. For a printer, resolution is expressed in dots per inch (dpi).
L500/L505/L500D/L505D system disk: A diskette that contains the operating system files needed to start the computer. Any diskette can be formatted as a system disk. A system disk is also called a “bootable disk”, “boot disk” or a “startup disk.” Compare non-system disk. T telephony: the transmission of speech or sounds between two distant points with or without the use of wires, particularly a telephone.
L500/L505/L500D/L505D Glossary-14 User’s Manual
L500/L505/L500D/L505D Index A E AC adaptor, 1-6 additional, 1-13 connecting, 3-2 DC IN 19V jack, 2-4 ASCII characters, 5-5 Equipment checklist, 1-1 External monitor, 1-6, 2-2, 8-11 problems, 9-18 B Battery charging, 6-5 extending battery life, 6-8 indicator, 2-9, 6-2 Monitoring capacity, 6-7 real time clock, 1-6, 6-4 save mode, 1-9 Battery Charger, 8-7 Battery pack, 1-6, 2-4 additional, 8-7 replacing, 6-9 Bluetooth, 1-7, 4-25 Bluetooth Stack for Windows by Toshiba, 1-11 problems, 9-19 Bridge media slot
L500/L505/L500D/L505D Touch Pad, 5-4 Wireless, 5-4 Zoom, 5-4 HW Setup accessing, 7-1 general, 7-2 HW Setup utility, 1-11 I Indicators Battery, 2-9, 6-2 DC IN, 2-9 HDD/ODD/eSATA, 2-9 Power, 2-9 K Keyboard, 1-6, 5-1 emulating keys on enhanced, 5-2 FN Sticky key, 5-4 Function keys F1 ...
L500/L505/L500D/L505D USB device, 9-15 USB floppy diskette drive, 9-10 USB mouse, 9-14 Wireless LAN, 9-19 Processor, 1-3 R Recovery Discs, 3-12 Recovery hard disk drive, 3-10, 3-12 Restarting the computer, 3-9 S SD/SDHC memory card, miniSD/microSD Card problems, 9-11 Security lock attaching, 8-16 Sleep Mode, 1-10 setting, 3-8 System automatic, 1-9 Soft keys emulating keys on enhanced keyboard, 5-2 Sound system, 1-7, 4-17 Headphone jack, 1-7, 2-3 microphone, 2-7 microphone jack, 1-7, 2-3 Stereo speakers,
L500/L505/L500D/L505D Index-4 User’s Manual
