RD-XS55KU Playback OWNER’S MANUAL Recording HDD/DVD VIDEO RECORDER Introduction TOSHIBA HDD/DVD VIDEO RECORDER RD-XS55KU DIGITAL VIDEO Editing Library OPERATIONS GUIDE Read “INSTALLATION GUIDE” first. Network Navi IMPORTANT NOTE Before connecting, operating, or adjusting this product, carefully read the Important Safety, Installation, Care, and Service Information in the INSTALLATION GUIDE.
Introduction Table of contents Introduction Playback Caution for safety ................................................ 4 About this product .............................................. 5 Choosing a disc .................................................. 6 Index to parts and controls .............................. 12 Front panel ............................................................... 12 Rear panel ............................................................... 14 Remote control ...............
Searching for a desired title ........................... 133 Changing the listing order ...................................... 133 Searching ............................................................... 133 Jumping ................................................................. 134 Checking remaining space ............................. 139 Viewing a number and space of a disc .................. 139 Viewing remaining space .......................................
Introduction Caution for safety Read “SAFETY PRECAUTIONS”, “IMPORTANT SAFETY INSTRUCTIONS”, “Precautions” and all other sections of the “INSTALLATION GUIDE” that came with this product prior to reading this “OPERATIONS GUIDE”. 4 RD-XS55SU_Ope_E_p002-011 4 06.3.
Introduction About this product “ ” may appear on the TV screen during operation. “ ” means that the operation is not permitted by the recorder or the disc. Recording Restrictions and Copyright Copy-protected contents of DVD-Video discs, VIDEO CDs or audio CDs on the market cannot be copied on this recorder. Contents without copy protection should be copied or edited only in accordance with applicable copyright laws, which may restrict copying or editing.
Introduction Choosing a disc When you want to play DVD or CD software or copy programs from the HDD to a recordable DVD, load an appropriate disc into the recorder. There are many types and formats of discs. Please use the following information to select an appropriate disc. Notes • Handle the disc according to the disc instruction manual.
Introduction For playback only Disc Mark DVD video disc Remarks • 12cm (43/4 in.) / 8cm (31/4 in.) Region number The region number of this DVD recorder is 1. If region numbers, corresponding to a specific playable area, are printed on your DVD video disc and you do not find 1 or ALL , or the disc is encoded to permit playback only in regions other than Region 1, disc playback will not be allowed by the recorder.
Introduction Choosing a disc (Continued) On DVD-RAM discs Use only DVD-RAM discs that comply with DVDRAM standard Version 2.0, 2.1 or 2.2. The recorder cannot record on a disc formatted in any other standard. When using such a disc, initialize it by using the disc-format function of this recorder. The recorder may not record, dub, or edit some DVDRAM discs, because they are edited/recorded with another manufacturer’s equipment or PC, contain a large number of titles, or have little remaining capacity.
Introduction On DVD-R discs Marks on DVD video discs The following are examples of marks and the meanings. Standards Mark Number of audio streams recorded in the disc. (2 streams such as English and Japanese in this example.) 2 Images for which copying is prohibited or restricted (copy once or copy prohibited) cannot be recorded. Even if the disc is labeled as CPRM compatible, this recorder can only be used to record copy-free material. DVD-VR mode recording is not possible.
Introduction Choosing a disc (Continued) Structure of disc contents On handling discs Normally, DVD video discs are divided into titles, and the titles are subdivided into chapters. VIDEO CDs/audio CDs are divided into tracks. Do not touch the playback side of the disc. DVD video disc Title 1 Title 2 Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3 Yes Playback side Do not stick paper or tape to discs.
Introduction Discs and purposes The table shows main functions which are available on this recorder per disc category. This will help you choose discs. DVD-R disc Suitable for repeat use of the disc, and data storage for video library. Copy once contents can be recorded using a compatible disc. Suitable for saving data in DVD-Video format to play on compatible devices. Suitable for saving data in DVD-Video format to play on compatible devices.
Introduction Index to parts and controls See pages with arrows for details. Front panel All operations can be possible from the supplied remote control. 4 2 1 20 3 5 6 7 9 8 17 15 13 11 18 16 14 12 10 19 * The above illustration displays the front panel with the cover open. See the following page on how to open or close the cover. q ON/STANDBY button / ON/STANDBY indicator page 20 Turns the power on/restores the unit in the standby mode. u Disc tray page 20 Loads a disc into the disc drive.
Introduction Recording Playback Editing !7 (STOP) button page 50, 61 Stops playback or recording. To open or close the cover on the front panel Put your finger on the left edge of the cover and pull it down to open. page 52 @0 DV IN terminal Use this when recording from a digital video device such as a digital video camera. Network Navi page 49 !9 INPUT2 jacks Use this when recording from other input source such as a VCR or a camcorder.
Introduction Index to parts and controls (Continued) Rear panel 1 2 3 11 q AC IN socket GUIDE” 10 page 21 in “INSTALLATION w Ventilation fan Do not block the ventilating holes. e DIGITAL AUDIO OUT BITSTREAM/PCM page 29 in “INSTALLATION OPTICAL jack GUIDE” Use this to connect the recorder to an audio receiver equipped with an optical digital audio input jack. page 28 in r COMPONENT OUTPUT jacks “INSTALLATION GUIDE” Outputs video signals to a connected TV or monitor.
Introduction Recording Playback Editing o OUTPUT jacks page 21, 23, 24, 28 in “INSTALLATION GUIDE” Outputs video and audio signals to a connected TV or amplifier. Library page 25 in “INSTALLATION !0 G-LINK jack GUIDE” Connect the supplied G-LINK® cable to this jack if you are connecting this recorder to a cable/ satellite box.
Introduction Index to parts and controls (Continued) Remote control 1 15 2 16 17 18 19 20 21 3 4 5 6 7 8 22 23 24 25 26 27 28 9 10 11 12 13 35 34 44 36 46 29 37 30 38 31 39 40 32 41 33 42 43 14 48 50 16 47 49 51 52 16 RD-XS55SU_Ope_E_p012-019 45 06.3.
Introduction 1 OPEN/CLOSE button page 20 3 HDD button page 50 in 33 T.
Introduction Index to parts and controls (Continued) Display 1 2 10 11 12 3 4 5 6 7 13 14 15 16 q PBC indicator Illuminates when a PBC-controllable VIDEO CD is loaded. w Program recording indicator Illuminates when the recorder holds a timer program. e Bit rate indicator Illuminates when displaying the bit rate selected for recording, or when displaying the actual bit rate. r REMAIN (Remaining space) indicator Illuminates when an available recording time is displayed.
Introduction Dimming the display Pressing DIMMER button on the remote control changes the brightness of the display (normal/dimmed/off). Recording Switching the display Every time you press FL SELECT button, the display changes between the channel, title number, and time. The display may not change, depending on the disc or recording conditions. Playback Editing !4 TITLE indicator Illuminates when a title number is displayed. !5 TRK (Track) indicator Illuminates when a track number is displayed.
Introduction Before operating this recorder Is your recorder ready? Loading a disc • Refer to “INSTALLATION GUIDE” manual and finish the necessary preparations. • Turn on the connected equipment such as a TV or audio system and select the input from the recorder. Check disc compatibility beforehand ( and use a proper playable disc. Turning the power on (This owner’s manual instructions are based on the premise that all proper connections have been completed and the TV is turned on.
Network Navi Function setup The “Unloading” icon appears at the top right corner of the screen, and ON/STANDBY indicator turns red, then the power turns off (Standby mode.) You can lock the disc tray. Press and hold PAUSE on the remote control for longer than about 3 seconds. To unlock, press the button for longer than about 3 seconds. Library Press ON/STANDBY on the front panel of the recorder or on the remote control.
Introduction Before operating this recorder (Continued) Start-up/Shutdown (closing) icons Status display These icons are displayed at the top right corner of the screen when startup or finishing. While they are flashing, the recorder is operating as follows: Each time you operate the recorder, the following displays appear on the TV screen to indicate the status of the recorder.
Introduction Using TV Guide On Screen® When using a satellite box, TV Guide On Screen LISTINGS service is not available for changing channels for TV viewing or setting recordings. page 43 for instructions. Only manual timer recordings are available. Please see e.g. CONTENT Title List MENU News Info Box HDD 1 / 2 Page 3:19 RECORDINGS Recording Press TV Guide. TV Guide On Screen LISTINGS service is displayed.
Introduction Using TV Guide On Screen® (Continued) Note Please note that over-the-air or cable access to stations carrying TV Guide On Screen® data is required for the TV Guide On Screen® system to operate. TV Guide On Screen® does not work with satellite programming. Toshiba does not provide the TV Guide On Screen® data. Instead, the data is provided by a third party, which is responsible for the accuracy and availability of the data.
To search by entering a keyword Introduction 1) Press / to select “KEYWORD” then press ENTER. “Keyword Search” appears. 2) Press / to select “new search” then press ENTER. “Search Options” appears. 3) Press / to select “category” then press / to select a category. 4) Press / to select “enter keyword” then press ENTER. The keyboard appears. / / Recording / 5) Press to enter a keyword. e.g. CAL DONE Press / to select a entry point then press ENTER. The selected letter is entered.
Introduction Using TV Guide On Screen® (Continued) To delete recorded programs (“view as” is set to “group”) 1) Press / to select a TV program and press ENTER. 2) Press to select an episode and press Menu. “Episode Options” appears. 3) Press / to select “delete episode” then press ENTER. A confirming menu appears. 4) Press / to select “yes” or “no” then press ENTER. Note • When “view as” is set to “list”, press / to select a TV program and Menu. On “Episode Options”, press “delete episode” then ENTER.
SETUP If you select this service and press ENTER, options to change settings are listed. Introduction To execute the setup again 1) Press / to select “Change system settings” then press ENTER. Your current settings are displayed. 2) Press / to select your answer then press ENTER. 3) Follow the on-screen guidance. Recording To arrange the position the channel appears in LISTINGS To change the tuning channel number To switch channels on/off in LISTINGS 2) Press / to select a channel then press Menu.
Introduction Using TV Guide On Screen® (Continued) To change recording defaults 1) Press / to select “Change default options” then press ENTER. 2) Press / to select “Record defaults” then press Menu. “Record Defaults” appears. e.g. Record Defaults start Press / to select the time to start recording. end Press / to select the time to end recording. recorder Press / to select the drive. quality Press / to select the recording mode. page 42.
Introduction Key operation - EASY NAVI & QUICK MENU Introduction The EASY NAVI button opens “EASY NAVI Main Menu”, a main gate to the functions of this recorder. From this menu, you can access the desired functions while viewing a current picture. Additionally, QUICK MENU button provides you a sub menu of the current function. EASY NAVI Press EASY NAVI. Sound is muted and the following GUI appears. (Actual displays vary depending on operational status.) e.g.
Introduction Key operation - EASY NAVI & QUICK MENU (Continued) To exit the EASY NAVI Quick Menu operation Press EASY NAVI again. To access various optional functions of this recorder, open Quick Menu. Quick Menu displays a list of selections relevant to your current mode. Note • For a disc other than the specified one, the finder cannot be operated. To play the disc, exit the EASY NAVI then press the PLAY button, or select the “Play Contents” function. Opening Quick Menu 1) Press QUICK MENU.
Hint on reading this manual The following icons show the playable discs for each function described on this instruction manual. HDD : HDD DVD-RAM : DVD-RAM disc DVD-RW : DVD-RW disc DVD-R : DVD-R disc Recording Recording variations for many types of programs or situations. DVD-VIDEO : DVD video disc Before recording VCD : VIDEO CD CD : Audio CD (For CD containing JPEG or MP3/WMA files, see page 74, 76.
Recording Before recording Please be sure to read this critical background information prior to making a recording. This recorder is equipped with a built-in HDD. Conventional video cassette recorders have required tapes to record, while this recorder enables recording on the HDD whenever you want, without selecting an available tape or confirming its recording time or tape remaining. Further, the DVD-RAM drive on this recorder can record on a DVD-RAM/R/RW disc in the same way as a tape.
Library 2) After checking the capacity, press REMAIN again to turn off the display. Network Navi When “HDD recording is not possible due to...” appears The HDD is full. To record new content, delete unnecessary titles or transfer some content to a DVDRAM disc. Function setup Notes Others • The “Loading” icon appears in the top right of the screen after recording. This indicates that the unit is executing the final recording process (writing managing information).
Recording Before recording (Continued) Initializing a DVD-RAM/RW disc (Logical format) Be sure to read this section prior to using a DVD-RAM/RW disc on this recorder for the first time. For DVD-R, initializing is not necessary. A disc should be initialized in the following cases: (The recorder may display a message to request you to do so.) e.g. Quick Menu Bit rate Special playback mode Disc management DVD compatible mode Aspect ratio(Video mode) DVD-Video:CHP create User record quality SAP Exit e.g.
/ to select “Start,” then press ENTER. Introduction 4) Press 1) Press SETUP. 2) Press / to select “Management settings” then press ENTER. e.g. e.g. DVD format Start Cancel 0% Format e.g. SETUP 3) Press / to select “DVD-RAM Physical Format,” then press ENTER. 4) Press / execute. to select “Yes,” then press ENTER to Playback 5) Press / to select “Start,” then press ENTER. Initialization starts.
Recording Before recording (Continued) Entering characters Indicates the end of the first line on CONTENT MENU. e.g. Cursor An entered character will appear here. CONTENT Title information MENU Indicates the limit of Characters displayable on CONTENT MENU. Chapter 003 The character being selected appears. Language 1 q a z English Spanish French German Italian etc...
Introduction Entering characters The cursor may be followed by unwanted characters. You can erase them if necessary by either of the following measures: Erasing characters Recording • Erasing all the characters on the writing board Select “Clear All” by pressing / / / buttons, then press ENTER button. Alternatively, press CLEAR button. Playback • Erasing one character before the cursor Select “BkSp” by pressing / / / buttons, then press ENTER button. Alternatively, press DELETE button.
Recording Before recording (Continued) Selecting a disc according to purposes of use (DVD-RAM/R/RW) There are various types of discs having different standards. Select one for your purpose of use. Purposes of use • Editing after recording (e.g. deleting unnecessary portions, dividing chapters). • Playing discs recorded on this recorder with other DVD players. • Recording so that the sound of bilingual broadcast can be switched. (Some DVD players may not play these discs.
Introduction Setting for recording on a DVD-R/RW disc in Video mode This setting is necessary to play the contents on a DVD-R/RW disc with other DVD players. How to set up When recording in Video mode, there are some restrictions by DVD-Video standard. Therefore, it is necessary to set up these items below. Set up the items in advance before copying contents from the HDD to a DVD-R/RW disc. SETUP menu appears. SETUP 2 Select “DVD recorder operation” and press ENTER. e.g.
Recording HDD DVD-RAM DVD-RW DVD-R Setting a timer recording using TV Guide On Screen® To record TV programs and end them automatically, follow the procedures of this chapter. When using a satellite box, only manual timer recordings are available for setting recordings. page 43. See page 32). Before setting recording, see “Before recording” ( Preparation • When you record on a DVD-RAM/R/RW disc, load it into the recorder. – Load a disc which has sufficient remaining space to record the program.
Introduction Changing the recording options TV Guide / to select a TV Or to search for a TV program, see Recording 1 Press TV Guide, then press program to record. page 24. Start ENTER Playback 2 Press Menu. Editing “Episode Options” appears. Menu Library 3 Press / to select “set recording” then press ENTER. “Record Options” appears. ENTER e.g.
Recording Setting a timer recording using TV Guide On Screen® (Continued) recorder: HDD: Records onto the HDD. DVD: Records onto a loaded disc. quality: See “Recording mode” 5 When complete, press / to select “schedule recording” then ENTER. “Record Options” is closed. The icon appears on the TV program. ENTER Note If you cancel the selections, select “cancel” then press ENTER button.
Setting recording (For satellite box users) 1) Press TV Guide. 2) Press 2) Press to select “SCHEDULE”. / to select “SCHEDULE”. 3) Press Menu. “Schedule Options” appears. 4) Press / to select “new manual recording” then press ENTER. “Record Options” appears. 4) Press / to select “new manual recording” then press ENTER. “Record Options” appears. 5) Set the details. 5) Set the details. 3 5 6 7 8 9 to input digits. 0 e.g. 1 2 3 4 5 6 7 8 9 to input digits.
Recording Setting a timer recording using TV Guide On Screen® (Continued) Deleting a recording To stop a scheduled recording 2 ways are available. On LISTINGS 1) Press TV Guide. 2) Press / / / to select the TV program currently being recorded. 3) Press REC repeatedly until the recording icon disappears. 1) Press TV Guide. 2) Select a TV program you have set to record (icon displayed). 3) Press Menu. “Episode Options” appears. 4) Press / to select “delete recording”, then press ENTER.
Recording HDD DVD-RAM DVD-RW DVD-R Recording a TV program Introduction To record a TV program currently being broadcast, follow the procedures of this chapter. Preparation Start Press HDD or DVD to select a media to record on. Playback 1 Recording • When you record on a DVD-RAM/R/RW disc, load it into the recorder. - Load a disc which has sufficient space available to record the program. - Make sure the loaded disc is not write-protected.
Recording Recording a TV program (Continued) You can set in advance the desired mode for each recording media (“HDD”, “DVD”). See below. Also for your customization of the MN mode, see below. 4 Press REC. Recording starts. REC Customizing the MN mode 1) During stop or at step 3 on QUICK MENU. page 45, press 2) Press / to select “User record quality” then press ENTER. 3) Change the setting for each recording media. • Press / to select “HDD” or “DVD”. • Press ADJUST to select the setting number (1 - 5).
Introduction Recording Playback Notes • During recording, you cannot change the recording parameters, such as modes, channels, etc. • The number of titles cannot exceed 99 for a DVD-RAM/R/RW disc or 396 for the HDD. • One continuous recording cannot exceed in any case 9 hours. Recording automatically stops at 9 hours. • Even during normal recording, you can set the programmed recording. • You cannot start recording immediately before a programmed recording starts. • For recorded sound, see page 73.
Recording Recording a TV program (Continued) To play a recorded title while recording another on the same disc (Recorded Title Play) HDD DVD-RAM During recording, you can play a title recorded on the same disc. 1) While recording, press CONTENT MENU. 2) Press / / / to select a desired title, then press ENTER. Playback of the selected title starts. Pressing STOP button stops playback, and the content currently being recorded returns.
Recording HDD DVD-RAM DVD-RW DVD-R Recording an external source Introduction You can record programs from connected equipment on the HDD or a DVD-RAM/R/RW disc. Connect according to A or B. A: Using the input jacks on the rear of the recorder To video output jack INPUT1 (L-1) Audio cable INPUT3 (L-3) Red To audio output jack White Yellow Rear of the recorder Recording • To record a clearer picture, use the S video jack.
Recording Recording an external source (Continued) 1 Press INPUT SELECT repeatedly so that “L-1,” “L-2,” or “L-3” appears on the front panel display, corresponding to the input in which the device is connected. Each time you press the button, the indicator changes. INPUT SELECT L-1: To record pictures from equipment connected to the INPUT1 jacks on the rear panel. L-2: To record pictures from equipment connected to the INPUT2 jacks on the front panel.
Introduction Notes on recording from a connected VCR or camcorder Editing When recording from a camcorder Follow the above notes. Be sure to power the camcorder with its AC adapter, not batteries. If batteries are run down, the recording may not be finished completely. Playback Do not operate the source equipment during recording on this recorder. Operations such as pausing, resuming, fast-forwarding (CUE) and fast-reversing (REVIEW), etc.
Recording HDD DVD-RAM DVD-RW DVD-R DV recording (Recording from a digital video camera) You can connect a DV format digital video camera to the DV IN terminal to record from it. Preparation • Press HDD or DVD button to select a recording media • Connect a DV format digital video camera to the DV IN terminal on the front panel. DV IN terminal 1 Press EDIT MENU. “EDIT MENU Main Menu” appears. EDIT MENU 2 Press / to select “DV Recording”. e.g.
Introduction / / to make the settings. As you select each item, an explanation is provided. ENTER To change the picture and sound rates: 1) Press / buttons to select “Change” then press ENTER button. 2) On the “User record quality” display, press ADJUST button to select a setting number. 3) Press ENTER button. Press / ENTER. / / Playback 5 / Recording 4 Press to select “Next”, then press Details of the recording appears. EDIT DV Recording Editing e.g.
Recording DV Recording (Recording from a digital video camera) (Continued) Notes • The DV IN terminal of this recorder supports only input from a DV format digital video camera. It cannot output to a connected device. Some models of DV format digital video cameras may be not compatible. • At step 5, you can enlarge the video image by selecting “Full Display”, then pressing ENTER button.
Recording HDD DVD-RAM DVD-RW DVD-R Deleting recorded contents Introduction Important note Any deleted title/chapter (original) cannot be restored. Before deleting, be sure to check contents on the disc. On a finalized DVD-R/RW disc, this feature is not possible. To delete a title (chapter) To display chapters, press e.g. CONTENT Title List MENU / / / Recording 1 Start Press CONTENT MENU, then press to select a title to delete. button.
Recording Others To protect recorded content You can protect recorded contents of the HDD or a DVD-RAM disc from unexpected deletion. Protection is provided for each title (original). 1) Perform steps 1 and 2 in “Playing recorded page 60) to contents (CONTENT MENU)” ( select a title. 2) Press QUICK MENU button, and press / buttons to select “Title information”. Then press ENTER button. 3) Press QUICK MENU button, and press / buttons to select “Lock” and then press ENTER button. appears.
Introduction D /M1, D /M2 Recording Sound recording format onto DVD-RAM discs. When recording, sounds are converted into digital signals and compressed. In playback, they are extracted to the D /M1 original sound. The standard differenciates D /M2 in data volume to use. D /M1 and and D /M2 are applied the digital recording technology for consumer products of Dolby Laboratories. Dolby D /M1 and Dolby Digital Digital 192 kbps is set for D /M2.
RD-XS55SU_Ope_E_p049-058 58 06.3.
Playback Play your favorite contents. Playing recorded contents (CONTENT MENU) Playing a DVD video disc Other playback functions RD-XS55SU_Ope_E_p059-065 59 06.3.
Playback HDD DVD-RAM DVD-RW DVD-R Playing recorded contents (CONTENT MENU) Titles and chapters recorded on the HDD or a DVD-RAM/R/RW disc are displayed in thumbnail view, so that you can easily locate a desired one. page 25. You can play recorded TV programs also from TV Guide On Screen. See 1 Press CONTENT MENU. CONTENT MENU “CONTENT MENU Title List” appears. e.g.
Each recorded content is displayed as its thumbnail. HDD 1 / 2 Page HDD : 2006/03/24 11:00 pm TV:6 (0:29:50) Original 2006/03/29 09:00 pm TV:3 (0:52:40) Original 2006/04/07 11:00 am TV:4 (0:30:08) Original 2006/04/07 07:00 am TV:8 (0:54:30) Original 2006/04/08 09:00 pm TV:10 (0:51:28) Original A recorded title is marked with “Original”. A fictitious title created by editing is marked with “Playlist”. Titles (Original) precede titles (Playlist) in order from the oldest one.
Playback Playing recorded contents (CONTENT MENU) (Continued) Playing at various speeds HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD CD Playing in fast reverse or fast forward During normal playback, press PICTURE SEARCH. SE AR CH : Fast forward playback : Fast reverse playback P U IC T RE Each time you press the button, the playback speed changes. During fast forward playback at “ ” speed, sound is reproduced. (Not available on VIDEO CD.
The recorder memorizes the location you last stopped playback to resume from there. This feature repeats playback of about 5 seconds and skip of 1 minute from the beginning to the end of a recorded title, so that you can view the digest of it. To use this function, set “HDD/RAM title play” ( page 183) to “Title resume.” The recorder will memorize the location you last stopped at in each title, so you can resume playback from there.
Playback Playing recorded contents (CONTENT MENU) (Continued) Playing all titles (original) in a disc (Play All ORG Titles) Checking the background information on a selected title You can play all Original titles in the HDD or a DVDRAM disc in the order of the thumbnails on CONTENT MENU, as if they were recorded in one video tape. 1) At step 2 on page 60, select a title (chapter) then press QUICK MENU. Quick Menu appears. 1) Press QUICK MENU. Quick Menu appears.
Jumping to a specified page You can change the order or sort the titles by genres. 1) Press CONTENT MENU. CONTENT MENU appears. 1) Press CONTENT MENU. CONTENT MENU appears. 2) Press QUICK MENU. Quick Menu appears. 3) Press / to select “Display changeover”, then press ENTER.
Playback DVD-RW DVD-R DVD-VIDEO VCD CD Playing a DVD video disc You can also play VIDEO CDs, audio CDs or finalization processed DVD-R discs in the same manner. page 60. To play recorded contents, follow the instructions on Preparation • Turn on a TV or audio system and select the corresponding input source that the recorder is connected to. page 20) • Load a disc you want to play. ( 1 Start Press DVD. DVD 2 The DVD indicator on the front panel will illuminate.
DVD-RW DVD-R DVD-VIDEO VCD CD You can resume playback from the location where you stopped at. If you stop playback by pressing STOP button twice, the resume playback feature will be cancelled. If a disc contains several languages, you can select a preferred language from them to hear. 1) During playback, press AUDIO. Each time you press the button, output sound changes. You can display subtitles on the TV screen and select a subtitle language from those included on the disc.
Playback Other playback functions Pausing a TV broadcast to resume later (Pause TV) HDD This function enables you to pause a TV broadcast and resume viewing at a later, more convenient time, by storing the TV broadcast temporarily on the HDD. 1 Start While viewing a TV broadcast via this recorder or immediately before it starts, press TIMESLIP. TIMESLIP 2 When pause TV mode is ready, playback starts automatically.
HDD DVD-RAM You can begin playback from the beginning of a program currently being recorded. You will find this function of great advantage on long programs, as you do not have to wait for the end of recording to begin playback. TIMESLIP The recorder displays a TV program as it is being recorded. Go back to the beginning of the TV program using SKIP. SK Playback 2 Recording 1 Start While recording a TV program on the HDD or a DVD-RAM disc, press TIMESLIP.
Playback Other playback functions (Continued) Zooming a picture HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD You can magnify areas within a picture. 1) Press ZOOM. A zoom scope appears. Zoom scope 2) Select a zoom point and magnification level. : Raises the magnification level. : Lowers the magnification level. / / / : Moves the zoom point. (only after the image has been magnified) CLEAR : Returns the zoom point to the center of the picture. Notes • Some discs may not respond to zoom feature.
HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD CD Introduction Locating by entering the number of a desired section Normally titles, chapters, and tracks are numbered. By entering these numbers, you can access a desired section. Search / Search If you are using a VIDEO CD/audio CD, skip step 2. Chapter 0001 to select a section (title or chapter) you want to locate. Playback 2) Press e.g. Recording 1) Press T.SEARCH. e.g. 001 Title When you want to locate a chapter.
Playback Other playback functions (Continued) Selecting the sound HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD You can select a preferred language and a sound format. 1 Press AUDIO during playback or while receiving a broadcast. The current audio setting appears. AUDIO 2 The language code appears instead of the language name. Refer to the list of languages and their page 195) abbreviations. ( Press ADJUST while the audio setting is displayed on the TV screen.
Introduction Recording Notes • Some discs allow you to change audio selections only via the disc menu. If this is the case, press MENU button and choose the appropriate language from the selections on the disc menu. • When you turn on the recorder or replace a disc, the recorder returns to the initial default setting. ( page 176) Depending on a disc, a specific type of audio the disc has is output.
Playback Other playback functions (Continued) Viewing JPEG files You can play JPEG files that have been recorded on a CD-R or CD-ROM on the recorder. Preparations • Prepare a compatible disc ( page 75) that contains JPEG files you want to view. page 183) to “Photo”. • Set “Priority contents” ( • Make your TV shape conform to the 4:3 picture size. Only 4:3 pictures can be played regardless of the function settings via the on-screen displays of the recorder ( page 48, “INSTALLATION GUIDE”).
Direct input of a photo number Viewing a specified photo (single view) Full screen still view. 2 ways are available: On “CONTENT MENU Picture List” e.g. 1) Press CONTENT MENU. “CONTENT MENU Picture List” appears. Search “Auto”: For CD of which compatibility confirmed by TOSHIBA. Only playable files are listed.
Playback Other playback functions (Continued) Playing MP3/WMA files You can play MP3/WMA files that have been recorded on a CD-R or CD-ROM on this recorder. Preparations • Make sure that a disc you want to play is compatible with this recorder. See page 183) to “Audio”. • Set “Priority contents” ( 1 page 77. Press DVD. DVD 2 Start Load a CD that contains MP3/WMA files. Playback starts from the first track of a current folder. OPEN/CLOSE Notes • WMA tracks copy-protected cannot be played.
Notes • “CONTENT MENU Audio List” cannot show all the tracks in a disc, but only ones regarded as objects of proper play of the disc. • Letters of a file/folder name overflowing the given space are not displayed. 1) Press T.SEARCH. An input window appears. e.g. Search Track 001 * This recorder supports ID3v2 (ID3 Tag Version 2) of MP3, to display text data such as names of title and artist. Some characters may be displayed properly. 1) Press QUICK MENU.
Playback Other playback functions (Continued) Checking the current status and settings HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD CD You can confirm operational status and setting details. Operational status and setting details 1 Press DISPLAY. DISPLAY The following on-screen display appears. (The actual display varies depending on the disc.) e.g. while playing the HDD Mode indicator Elapsed time of a title/ Elapsed time of a chapter Title No./ Chapter No.
Introduction Using the time bar The time bar shows the current progress in playback or recording. Recording 1 During playback or recording, press TIME BAR. The time bar appears. (The actual display varies depending on the disc.) TIME BAR e.g. Playback Location 00 : 55 : 00:00F Chapter division Elapsed time Start Total playing time of a current title (In the case of a VIDEO CD or audio CD, it shows the total playing time of the disc.) Locator (Shows the current location.
Playback Other playback functions (Continued) Functions in Quick Menu Besides these examples, various other ones are introduced on respective pages for your convenience. See page 30 on how to operate Quick Menu. Repeat all PL titles To play repeatedly (Repeat playback) HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD CD You can repeat a desired section. 1) During playback, press QUICK MENU. 2) Press / to select “Special playback mode”, then press ENTER. Special playback mode The sub menu appears.
(in Random play mode) DVD-RW DVD-R DVD-VIDEO VCD CD You can select 30 titles, chapters, or tracks and play them in favorite order. (To play contents in the HDD or a DVD-RAM disc in favorite order, make a playlist. For details, see page 84.) “Editing” on Special playback mode The sub menu appears. Select the next item by pressing / buttons and ENTER button. e.g.
RD-XS55SU_Ope_E_p078-082 82 06.3.
Editing You can create your own movie from your assembled scenes. Save your favorite videos in DVD discs. Creating your own title Creating a DVD-Video using DVD-R/RW DVD-Video finalizing process Other editing functions RD-XS55SU_Ope_E_p083-091 83 06.3.
Editing Creating your own title You can edit recorded contents and create your own library. Note on deleting unnecessary scenes It is not recommended that you delete many chapters from titles recorded on the HDD to remove unnecessary parts of the titles and copy those contents on a DVD-RAM disc. The reason is that discontinuous space inside the HDD expands and recorded contents are stored in gaps between used locations.
Introduction Basic flow Recording a TV program Record a TV program and it becomes a original title. e.g. Title: The world of cats and dogs. Recording Playlist editing Collect your favorite chapters to make them as one title. (Playlist) If an original title is deleted, a playlist will be also deleted because playlists are fictitious titles. e.g. Making a playlist by collecting scenes of cats from title 1 “The world of cats and dogs”.
Editing Creating your own title (Continued) 1: Changing a name of a recorded title 1 2 HDD DVD-RAM DVD-RW Press CONTENT MENU, then press to select a title. / / / Press QUICK MENU then select “Title information” by pressing / from the Quick Menu, then press ENTER. Start “CONTENT MENU Title information” appears. QUICK MENU e.g. CONTENT Title information MENU Title : 006 3CH 2006 3/26(Su) 2006/03/26 10:00pm TV:3 ENTER 3 HDD Media : Quality : X P Mode : L P Rate : 2.
HDD DVD-RAM 1 title is created by recording at a time, which includes 1 chapter. By dividing it into several chapters, it will be easier to access a desired scene, and your editing or playback will be much easier. Playback Notes • Chapters cannot be created in the following modes: Dubbing / Fast-reverse, Fast-forward / Slow-motion • You cannot divide a title of a DVD-R/RW disc into chapters.
Editing Creating your own title – 2: Dividing a recorded title into several chapters (Continued) 3 Press / to select “Chapter function”, then press ENTER. The submenu appears. e.g.
Introduction Recording 6 At a point where you want to make a chapter division, press PAUSE. The picture pauses. PAUSE e.g. EDIT MENU HDD Chapter Editing Fishing Guide Original Aspect Ratio 4:3 Title:004 00:00:00 Chapter:0001 Playback Location 00:00:21:24F Divide To create new chapter, select desired start point via remote. To set, press enter. 00:54:30 B ENTER / / to select “Divide,” then press Editing 7 Press / ENTER.
Editing Creating your own title – 2: Dividing a recorded title into several chapters (Continued) Notes • This recorder supports a limited number of chapters on a disc. If exceeded, a message appears. In this event, reduce the number of chapters by merging chapters. ( page 91) • “EDIT MENU Chapter Editing” can also be viewed by selecting “Chapter Editing” from “EDIT MENU Main Menu”. e.g. EDIT HDD Main Menu MENU Chapter Editing Chapters can be divided on frame basis.
1) Perform steps 1 to 5 on pages 87 to 88, to view the EDIT MENU Chapter Editing display. 3) Press QUICK MENU. e.g. EDIT MENU Chapter Create HDD Quick Menu Chapter break edit mode 2006/03/30 05:09pm CH:3 Original Aspect Ratio 4:3 Location 00:00:00:03F Divide To create new chapter, select desired start point via remote. To set, press enter.
Editing Creating your own title (Continued) 3: Collecting necessary scenes HDD DVD-RAM Create a “Playlist” to omit unnecessary scenes for dubbing, or compile desired scenes. 1 Press CONTENT MENU. “CONTENT MENU Title List” appears. CONTENT MENU Start 2 Press QUICK MENU. Quick Menu appears. QUICK MENU 3 Pressing the HDD or DVD button can switch the drives. e.g.
Introduction Recording 4 Press / to select “Playlist editing”, then press ENTER. “EDIT MENU Playlist editing” appears. e.g. EDIT Playlist Editing HDD MENU ENTER / Start to select a title or chapter. e.g. EDIT Playlist Editing HDD MENU button.
Editing Creating your own title – 3: Collecting necessary scenes (Continued) 7 Press / to select a point where you want to insert the item, then press ENTER. If there are no parts in the lower area, leave the cursor to the left and press ENTER button. ENTER The selected part is inserted at the location of the cursor. e.g. EDIT Playlist Editing HDD MENU Title: 2006/05/07 10:30am B Source:Title Original Object :Title PlayList Entire Time: 00:13:45 Start A 8 Repeat steps 5 to 7 to insert items.
1) From EDIT MENU Playlist editing, press / / / to select a part to cancel. Introduction Canceling selection of a part Note • You cannot edit a title (Playlist) of still pictures, or a title (Playlist) which contains both still and moving pictures. 3) Press / to select “Cancel selected title”, then press ENTER. The part you have selected is canceled. 1) Press EDIT MENU. “EDIT MENU Main Menu” appears. 2) Press / / / to select “Playlist editing,” then press ENTER. “EDIT MENU Playlist editing” appears.
Editing Creating your own title – 3: Collecting necessary scenes (Continued) Making a Playlist of recorded contents where starting times are the same (i.e. daily or weekly recordings) This will help to sort serials. 1) From “CONTENT MENU Title List”, press QUICK MENU. 2) Press / to select “Edit function”, then press ENTER. 3) Press / to select the item. “Playlist(Mon-Fri)” To sort out programs recorded on the same time on Monday to Friday to make a Playlist.
You can dub (copy or move) contents recorded in the HDD or DVD-RAM/R/RW, between HDD and DVD-RAM drive or within the same drives. Learn about dubbing on this recorder to select the best method.
Editing Creating your own title – 4: Dubbing to save (Continued) High speed Library dubbing of several parts Rate conversion dubbing Rate conversion dubbing of several parts Line-U dubbing To High speed Library dubbing HDD Yes Yes Yes Yes Yes DVD-RAM Yes Yes Yes Yes Yes DVD-R/RW (Not finalized yet) Yes Yes Yes Yes Yes HDD Yes Yes Yes Yes Yes DVD-RAM Yes Yes No No No HDD Yes Yes Yes Yes Yes DVD-R/RW No No No No No From HDD DVD-RAM DVD-R/RW • • • • It is n
Introduction Recording and playback while dubbing Dubbing process by “High speed dubbing” and “Dub selected items” procedures will allow you to make a recording or playback of other titles.
Editing Creating your own title – 4: Dubbing to save (Continued) A: High speed dubbing (Dubbing only a specified part) HDD DVD-RAM DVD-RW DVD-R This section explains how to dub a specific title or chapter. To select several parts and dub them all at once, refer to page 102. 1 2 Start Press CONTENT MENU, then press to select a title. / / Press QUICK MENU. The Quick Menu appears. QUICK MENU 3 Press / to select “High speed dubbing” from the Quick Menu, then press ENTER.
Introduction ENTER Library Copying starts. The job progress is displayed on the screen and the front panel display. When the job finishes, the graph disappears and the buzzer sounds. Network Navi You can set the recorder to turn off automatically when the job finishes. (1) During the operation, press QUICK MENU button. (2) Press / buttons to select “Auto power off”. (3) Press ENTER button. Notes A title or a chapter becomes a title by being copied.
Editing Creating your own title – 4: Dubbing to save (Continued) A: High speed dubbing (Dubbing specified parts together) HDD DVD-RAM DVD-RW DVD-R This section explains how to copy several specific titles or chapters. Assigned names of titles/chapters or other information can also be copied. A title or chapter becomes a title by being copied. 1 Start Press HDD or DVD to select a disc that contains titles or chapters you want to copy. HDD DVD 2 Press EDIT MENU.
Introduction Recording 4 Press / / / to select a part (a title or chapter) to copy. • To go to the next or previous page, press PICTURE SEARCH ( / ) button. ENTER • To select a chapter, first select the title that contains the chapter you want, then press button. To go back to the title display, press button again. HDD MENU Source will be Title. Original DVD Editing 5 Dub To: Title Playback e.g. EDIT Dub Selected Items Press ENTER. B A A cursor appears in the lower area (destination media).
Editing Creating your own title – 4: Dubbing to save (Continued) 7 Repeat steps 4 to 6. You can confirm the available space of the destination media via the bar at the bottom of the display. Each of the collected parts is recorded on the destination media as a title. • To cancel selection of an individual part, see 8 page 105. Press / to select “Start”, press ENTER, and select “Yes”, then press ENTER. ENTER The broadcast picture appears and dubbing starts.
Introduction Cancelling selection of an item e.g. EDIT MENU Dub Selected Items Quick Menu HDD Cancel selected title Preview Preview all selected items Title information Clear all selected items Auto power off Exit Dub To: Original DVD Playback Capacity Title Recording 1) Press / / / to select an item then press QUICK MENU. Quick Menu appears. Start B A 2) Press / to select “Cancel selected title” (or “All clear” for cancelling selection of multiple items at a time). Editing 3) Press ENTER.
Editing Creating your own title – 4: Dubbing to save (Continued) B: Rate conversion dubbing (Dubbing at a modified bit rate) HDD DVD-RAM DVD-RW DVD-R You can reduce the recorded picture or sound rate when copying. This procedure enables content originally recorded onto the HDD at high rate setting to be dubbed onto a DVD-RAM disc at a reduced bit rate.
Introduction ENTER to select “Copy” or “Same Disc”. Copy: After the operation is completed, a specified part will remain on the disc where it was previously located. Same Disc: A part will be copied to the same disc and the copied part will become another title. Confirm picture and sound rates. QUICK MENU Playback 6 / Recording 5 Press To make changes, follow the procedure below. 1) Press QUICK MENU button to display Quick Menu. e.g.
Editing Creating your own title – 4: Dubbing to save (Continued) Rate Conversion Dubbing for multiple parts 1 2 Start Press HDD or DVD to select a disc containing the parts you want to dub. Press EDIT MENU. “EDIT MENU Main Menu” appears. EDIT MENU 3 Press / to select “Rate Conv. Items”, then press ENTER. “EDIT MENU Rate Conv. Items” appears. ENTER e.g. EDIT MENU Rate Conv. Items HDD Dub To: 4 Title Original DVD Collect parts to be dubbed, using steps 4 to 6 page 103.
To change the setting, perform the following steps. 1) Press QUICK MENU button to display Quick Menu. 2) Press / buttons to select “User record quality” and press ENTER button. 3) Press ADJUST ( / ) button to select the setting number and press ENTER button. When “Copy” on the bottom shows “X”, the selected parts are beyond the disc capacity. Change the rate for picture and sound quality or reduce parts to dub. Recording Press / to select “Start”, and select “Yes”, then press ENTER.
Editing Creating your own title – 4: Dubbing to save (Continued) C: Line-U dubbing (Recording pictures while viewing them) HDD DVD-RAM DVD-RW DVD-R You can record the picture being played back in either disc, or to the other disc, if the content is not copy-protected. page 112), back to the HDD. This procedure can be used also to copy contents of a DVD-R/RW you created ( Preparation • Make sure that the destination disc has adequate available remaining space.
Introduction STOP Playing stops, and a black screen returns. Press HDD. Playback 7 Recording 6 When playback of contents you want to copy is finished, press STOP. HDD Editing 8 Press STOP. Recording stops. STOP Library 111 06.3.20, 4:16 PM Others RD-XS55SU_Ope_E_p097-111 Function setup 111 Network Navi Notes • The following combinations of a source and a destination disc are possible.
Editing DVD-RW DVD-R Creating a DVD-Video using DVD-R/RW Content stored on the HDD of the recorder can be edited and copied to a DVD-R/RW, a popular media for distribution, and played on a compatible DVD video player. Notice • Beforehand confirm the contents of a disc. If you use a DVD-R disc, prepare a new one. This DVD-Video creation procedure is possible only once per disc on this recorder. Once you have copied to a DVD-R, you cannot redo, add, delete, or correct the copied contents in the disc.
Introduction “EDIT MENU Main Menu” appears. EDIT MENU e.g. EDIT MENU HDD Main Menu Chapter Editing Edit Functions Title Merge Divide 2 3 4 5 Playback Playlist Editing Dub Selected Items Rate Conv. Items Combine ORG Title DVD-Video Creation DVD-Video Finalizing Del Selected Items 1 1 Source DV Recording Chapter Editing Chapters can be divided on frame basis. Chapters can be merged and assigned names. Press / to select “DVD-Video Creation”, then press ENTER.
Editing Creating a DVD-Video using DVD-R/RW (Continued) 4 Press ENTER. A cursor appears in the lower area (destination media). ENTER e.g. EDIT MENU DVD-Video Create (Selected Items) HDD Sourece: Title Original Creating Media: DVD Cursor Next Capacity B 5 A Press / to select a location to place the selected part, then press ENTER. If there are no parts in the lower area, leave the cursor to the left and press ENTER button. ENTER The selected part is inserted into the location of the cursor. e.
to select “Next”, then press A screen is displayed to select options. DVD Video Creation(Option Settings) Menu Create Start Play Title+Chapter Menu Title After play one title Menu Next Title Menu Title 1 Set Aspect Ratio None Original Parts Test 4:3 fixed Stop All Test 16:9 fixed / / / Playback Return Next A B Press None Title 1 After play final title Writing Test Chapter Recording e.g. EDIT MENU ENTER 8 Introduction 7 Press / ENTER. to set the items.
Editing Creating a DVD-Video using DVD-R/RW (Continued) 10 Press to select “Next”, then press ENTER. A display of title menu selection appears if “Menu Create” is set to “Title+Chapter” or “Title” at step 7. ENTER page 119), go to the To view your captured images ( next page. e.g. EDIT MENU DVD Video Creation(Title Menu Select) MR.
Introduction 13 Press ENTER on “EDIT MENU DVD-Video Creation (Chapter Menu Select)” display. A confirmation message is displayed. Recording ENTER ENTER / to select “Yes”, then press ENTER. Playback 14 Press The current broadcast picture appears and dubbing starts. The progress is displayed on the screen and in the front panel display on the recorder. When the process is completed, a message “Create another DVD-Video now?” appears (except when “Auto power off” (see below) is set).
Editing Creating a DVD-Video using DVD-R/RW (Continued) Notes • The number of titles that you can write on a DVD-R/RW disc is limited (99 titles. Each title should have 99 chapters or less). If you have a large number of titles or chapters, you may not be able to write due to the limitation of the DVD specifications. Also, even if the number of titles and chapters is within the limit, you may not be able to write if you have a large number of menu items.
You can select favorite scenes from the recorded contents and use them as menus of DVD-Video page 116) DVD-R/RW. Created ( To delete all captured images, select “Delete all menus”. 3) Press QUICK MENU. 4) Press / to select “Save captured images”. 5) Select a scene. Locate a scene using the buttons such as PLAY, SLOW, FRAME or PAUSE, etc. e.g.
Editing Creating a DVD-Video using DVD-R/RW (Continued) To improve legibility of characters on menus Press / / / to set “Back ground color” to “On”. Then select “Color” (“White” or “Black”) according to the menu’s tone, and set “Permeation Ratio”, which sets the how translucent the selected Back ground color is. The higher the ratio, the Back ground color will be more translucent but the lower legibility of characters. To change the character color Press / / / to select from 12 colors.
Introduction If a message appears while selecting a part Recording You may receive a message, such as “Selection of Writing Test in the next option setting is recommended to check whether Aspect Ratio coexists”. If a copyprohibited content is included, or if the aspect ratio is changed meanwhile, cancel the selection. If you are not sure, select Writing Test (“Parts Test” or “All Test”). Playback Note • Depending on selection or condition of items, copying may result in failure.
Editing DVD-RW DVD-R DVD-Video finalizing process The recorder processes recorded data in a DVD-R/RW disc so that it can be played on other compatible devices. Important • You cannot rewrite data onto a disc after you execute the DVD-Video finalizing process. However, the disabled rewritability of page 125). On DVD-R discs, canceling of the DVDa DVD-RW disc can be restored by canceling the process of the disc ( Video finalizing process is not available.
Introduction / / to select. As you select each item, its function is explained. ENTER When “Menu Create” is set to “None”: “Start play” and “After play one title” are automatically omitted. Press / ENTER. to select “Next”, then press Playback 5 / Recording 4 Press Information on data to be processed appears. e.g. EDIT MENU DVD-Video Finalize(Disc Information) ENTER Disc name Edit Name Total time Editing Total title number 11 1 hour 24 min.
Editing DVD-Video finalizing process (Continued) 7 Press / / / press ENTER. to select the title menu, then A display of chapter menu selection appears if “Menu Create” is set to “Tltle+Chapter” or “Chapter” at step 3. ENTER 8 Press / / / to select the chapter menu. A selected menu is applied to all chapters. You cannot allocate a menu to each chapter. ENTER If you press button, you can preview the selected menu. To return, press O button.
Introduction Recording Notes • DVD-R/RW discs recorded on this recorder may not be recognized on other devices unless you execute DVDVideo finalizing process to them. • You can record onto a DVD-R disc additionally to the limit of the disc capacity, unless you execute the DVD-Video finalizing process to it. Deleting of recorded titles is also possible, however, the disc space cannot be restored.
Editing Other editing functions Changing the picture on CONTENT MENU HDD DVD-RAM DVD-RW DVD-R You can register your favorite scene as a thumbnail displayed on CONTENT MENU. On a finalized DVD-R/RW disc, this feature is not available. 1 2 Start Press CONTENT MENU, then press to select a title. / Press QUICK MENU. Quick Menu appears. QUICK MENU 3 / e.g.
Introduction PLAY At the point where you want to capture a thumbnail image, press PAUSE. e.g. CONTENT MENU Create Thumbnail Playback 5 Locate a scene you want to capture as a thumbnail. You can use the following buttons. PICTURE SEARCH, FRAME, SLOW, SKIP, PAUSE, etc. Recording 4 Press PLAY to start playback. HDD PAUSE 2006/03/24 11:00pm Ch:6 (0:29:50) Original Location 00:06:25:23F 00:00:00 Title:002 Chapter:0001 Editing Select desired thumbnail image via remote. To set, press enter.
Editing Other editing functions (Continued) Combining two titles (Original) into one HDD DVD-RAM Use this feature to combine two titles into one. The second title is deleted as the second title is added to the end of the first title. 1 2 Start Press HDD or DVD to select a disc that contains titles or chapters you want to merge. Press EDIT MENU. “EDIT MENU Main Menu” appears. EDIT MENU 3 Press / to select “Combine ORG Title”, then press ENTER. “EDIT MENU Combine ORG Title” appears. e.g.
Introduction ENTER It is fixed at the left side at the beginning. Press ENTER button. The selected part moved into the location of the cursor. e.g. EDIT MENU Combine ORG Title HDD Title Original Playback Object :HDD For source, only 2 titles (original) can be selected. After combined, the second title is included into the first one. Start combining Title: A B Editing 7 Perform steps 4 to 6 and select the second title. You cannot select the same title.
RD-XS55SU_Ope_E_p126-130 130 06.3.
Library To facilitate your collecting. Using Library data Searching for a desired title Viewing Library data Checking remaining space RD-XS55SU_Ope_E_p131-140 131 06.3.
Library HDD DVD-RAM Using Library data The recorder has a “Library Management” database which memorizes various properties of recordings made on this recorder, including date, media, title, genre, etc. Using this database, you can search for desired or available discs. You can utilize Library data as follows. • To search for a DVD-RAM disc that contains a desired title. • To check or change information of a title or disc. • To check the remaining space of a DVD-RAM disc.
Library HDD DVD-RAM Searching for a desired title Changing the listing order / The submenu appears. Press / buttons to select a genre, then press ENTER button. Titles within the selected genre are sorted. Recording 1) From Quick Menu, select “Arrange” by then press ENTER. The submenu appears. Sort by disc(DVD) Summary LIBRARY Title (All Titles) MENU No.
Library Searching for a desired title (Continued) Jumping Appoint disc no. The on-screen keyboard appears. Jump e.g. 1) From the Quick Menu, select “Jump” by then press ENTER. The submenu appears. e.g. Summary LIBRARY Title (All Titles) MENU 1/ 2 Quick Menu No. Date Day Time DVD space remaining discSu no.
Library HDD DVD-RAM Viewing Library data Introduction This section explains how to check and maintain the Library data. Viewing title information “Lock” Set the protection for the currently selected title. The protection icon “ ” appears. Title information e.g. CONTENT Title information MENU Title : 006 3CH 2006 3/26(Su) 2006/03/26 10:00pm TV:3 (2:06:32) Documentary/Culture(General) Original Chapter : 0001 (0:04:15) Note • When you change settings of a DVD-RAM disc, load the DVD-RAM disc.
Library Viewing Library data (Continued) Maintenance of Library data The recorder usually controls the Library database system automatically. However, in the following cases, you must maintain and create data manually. Registering a disc manually 1) Load a DVD-RAM disc that contains information you want to add. 2) Press LIBRARY. • When you want to add information about a title, (for example when you use a DVD-RAM disc recorded on another device, etc.), to the Library system of the recorder. page 136).
Deleting all the Library information only When the Library database is full (3000 entries).→ Select “Del title information”. Use this feature when you want to rearrange the whole Library information from the beginning. 1) Press LIBRARY. 1) Press LIBRARY. / to select a title. 2) Press QUICK MENU. 3) Press / to select “Library management” and press ENTER. 3) Press QUICK MENU. 4) Press / to select “Library management” then press ENTER. 6) Press / to select “Yes”, then press ENTER.
Library Viewing Library data (Continued) Saving the Library data in a DVD-RAM disc 1) Load a DVD-RAM disc to save the Library data. 2) Press LIBRARY. 3) Press QUICK MENU. 4) Press / to select “Library management”, then press ENTER. 5) Press / to select “Create backup”, then press ENTER. 6) Press / to select “Yes”, then press ENTER. To cancel, select “No”. Re-installing the backup data 1) Load the DVD-RAM disc containing the Library database. 2) Press LIBRARY. 3) Press QUICK MENU.
Library HDD DVD-RAM Checking remaining space Introduction You can check the remaining space of each disc prior to recording. Viewing a number and space of a disc DVD all disc no. Viewing remaining space DVD space remaining To recheck the remaining space for a different “User record quality” setting Note • You can rearrange the list by selecting “Arrange”, “Narrowing” or “Jump” from Quick Menu. Playback 1) Press QUICK MENU. Quick Menu appears.
RD-XS55SU_Ope_E_p131-140 140 06.3.
Network Navi Operate the recorder with a PC.
Network NetworkNavi Navi What is Network Navi? Network Navi can operate and set the recorder using a web screen. You need a PC that can be connected to the recorder with a Local Area Network (LAN). If you have an always-on internet connection, you can use email to remotely set a timer recording. Main features of Network Navi Flow of Network Navi setting Editing titles using a PC e.g.
PC WWW browser The installation of Java VM Ver. 1.5 (for Mac OS X: 1.4.2) is required to use Network Navi features. To obtain the latest Java VM, check the website of Sun Microsystems, Inc. at http://www.sun.com/ (as of May 2005). Broadband always-on connection Note • Operating environment may change without advance notice. In addition, all operations are not guaranteed. 143 RD-XS55SU_Ope_E_p141-170 143 06.3.20, 4:16 PM Others (Continued) Function setup • Operating Environment 1.
Network Navi What is Network Navi? (Continued) • Any fees charged by an ISP including, without limitation, connection charges and email charges are your responsibility. • If the broadband internet connection device (such as a Cable Modem or ADSL modem) specified by your ISP does not have a 10Base-T or 100 Base-TX LAN port, you will not be able to make a connection to the recorder. • An ADSL modem is required to use ADSL service and a cable modem is required to use cable modem service.
Network Navi Preparation for Network Navi Introduction Follow the procedures 1 to 4 to use Network Navi. 1: Connection to a PC Direct connection to a PC Recording A PC with a LAN connection is required. The main method for PC connection is either a direct connection or through a constant and continuous (“always-on”) internet connection. Usable features differ depending on the connection method.
Network Navi Preparation for Network Navi (Continued) Back view of the recorder LAN(10/100) Regarding the cable used: • When connecting directly to this recorder, use the included LAN crossover cable. • When connecting using a router, use a commercially available LAN straight cable (category 5/CAT5). Direct connection to a PC To LAN(10/100) port Crossover cable To LAN (Ether) port Connecting to a PC using a router (e.g.
Introduction 2: Recorder’s setup - Network Setting Recording 1 While stopped, press SETUP. The setup screen will be displayed. SETUP DVD player settings DVD disc menu language English ENTER , and Editing Management settings Network Setting Genre setting Front Display 3 / Playback 2 Select “Management settings” by press ENTER. On ff Select “Network Setting” by ENTER. / , and press The “Network Setting” screen will be displayed.
Network Navi Preparation for Network Navi (Continued) Note: Toshiba recommends that you take the following minimum general security precautions in connection with choosing a User Name and Password in connection with the Network Navi features of the recorder: • Choose a unique User Name and Password that would be difficult for someone else to guess (e.g., do not use the same password that you use for your email account, router, etc.). • Do not share your User Name and Password with anyone.
(Setting unnecessary) The default gateway that is obtained from the DHCP server is displayed. DNS, DNS Server Auto When “Use” is selected, the DNS server address is automatically obtained from the DHCP server. Introduction Default Gateway Manually enter the DNS server address. Up to 63 single-byte alphanumeric characters or symbols Enter the proxy server address when your provider requires proxy setting. Proxy Port 80 Normally there is no need to change this setting.
Network Navi Preparation for Network Navi (Continued) Setting example - Sender of timer recording setting mail and receiver of completion notice e.g. homeadd@yyy.zzz.com e.g. mobileadd@yyy.zzz.com Timer recording Completion notice setting mail from: received at: Settings Mail Function Enable Mail Keyword abc1234 POP3 Server Address yyy.zzz.com POP3 User Name xxxx Select “Return toaaabbb sender”. POP3 Password Accept Only Completion Notice APOP Return to sender yyy.zzz.
Introduction 3: Setting up the PC Setting up the PC (when directly connecting to the PC) Editing When setting has been previously established, keeping a record of the original setting prior to any changes is recommended so that it can be changed back. Playback 1 “Control panel” → “Network connections” → click “Properties” of “Local area connection” → click “Properties” of “Internet protocol (TCP/ IP)”. Select “Use next IP address” to set the IP address and subnet mask.
Network Navi Preparation for Network Navi (Continued) 4: Starting Network Navi Start Network Navi to set up/operate the recorder using a PC. The following instructions are for Windows® XP. 1 Launch the internet browser to start using the Network Navi on the PC. Screen images of Windows® Internet Explorer are used as examples in this user’s manual. When the “Back” button on the browser is used to return to the previous page, the setting and display may not be set correctly.
Introduction 5: Network Navi Settings Settings for Network Navi features of the recorder. Recording 1 Click “Setup Menu” on the Main Menu. Playback Click 2 Click the item to be set and select the value or enter the data. 3 Click “Save” after the setting is completed. Editing For the content to be set, see below. Library The settings are saved. Click Program Description Include This allows program descriptions to be included when saving Library information to a CSV file.
Network NetworkNavi Navi Network Navi features Displaying thumbnails (Title List) ........................................................ 155 Operating with the remote control screen .......................................... 157 Net Keyboard .................................................................................................................... 158 Operation using the Virtual Remote Control ......................................................................
Introduction Displaying thumbnails (Title List) When the “Title List Editor” is clicked in the Main Menu, the thumbnails and information of the titles recorded on the HDD, DVD-RAM, or DVD-R/RW will be displayed. The title information such as the title names and genres can be changed*. It will take some time for them to be displayed. 1 Recording * • A DVD-R/RW (Video Mode) that was recorded on another device cannot be displayed or changed. • A finalized DVD-R/RW can be displayed but cannot be changed.
Network Navi Network Navi features (Continued) 3 4 Click on an item that you want to change, and select a value or input data. For the content of settings, see the following “Items for setting”. After the setting is completed, click “Save”. Click. The title information will be set. When you click “Return before saving the change”, the content of the setting will not be changed and you will return to the title list display. Items for setting Title Name This allows you to name the recorded title.
Using this feature, you can operate the recorder using a PC just like using the remote control included with the recorder. The remote control and the display area are shown on the right side and the bottom of the same window as Network Navi. Playback Click Click on a button on the remote control screen. Editing 2 Recording 1 Click “Virtual Remote Control” on the Main Menu.
Network Navi Network Navi features (Continued) View of the Virtual Remote Control Main panel Sub panel If you click on this area, the remote control will open and close. Switch between the Main panel and Sub panel by clicking these areas. Net Keyboard If the recorder’s character input window is started while the Virtual Remote Control is displayed, the Net Keyboard screen will be displayed on the PC. If you enter using Net Keyboard and click “Enter”, the Net Keyboard will close.
Introduction Operation using the Virtual Remote Control You can have remote control operations using the mouse of a PC. Using the Virtual Remote Control If the remote control screen is starting up, begin the setup after the screen has finished displaying. 1 Click “Setup Menu” on the Main Menu. Operate the mouse within the frame of the remotecontrol screen. Recording Setting up the Virtual Remote Control Playback 2 Click on the “Setup for Virtual Remote Control” button.
Network Navi Network Navi features (Continued) Using Library information (Library) Like in the “Library”, you can easily find a disc with remaining space or a desired disc by using stored information for each title such as the recorded time and date, where it is recorded, the title name, and the genre. In addition, Network Navi can make a CSV-format file output of the Library information to a PC. 1 Click “Library” in the Main Menu. The information for each title will be displayed in a list.
Introduction Setting for custom menu addition (Custom Menu Editor) When creating a DVD-R/RW, this feature will allow you to set and add 16 types of images that are separate from the 8 types of custom menu which initially came with the recorder. 1 2 Click “Custom Menu Editor” in the Main Menu. 3 Select “Use a background for Title/Chapter”, “Color”, or “Transparency”. Playback • If the format is the same, you can save an image from Mac OS as is (72 dpi).
Network Navi Network Navi features (Continued) 4 Select “Font Color”, “Cursor Position Color”, and “Cursor Enter Color”. Font Color: This is the font color for items displayed on the menu such as disc name, title name, chapter name, page number, and title/chapter time. The “Return” button that goes back to the title menu will have a white background with a black frame regardless of the setting. Cursor Position Color: The color that will be shown when you navigate the title menu.
You can perform dubbing by designating equipment (Toshiba’s HDD & DVD video recorder) on the same network as the dubbing destination. Net Dubbing can also be performed in “Dub Select Items”. HDD MENU Device select Device name B Original HDD HDD HDD HDD HDD HDD HDD HDD DVD DVD DVD DVD Dub To: DVD DVD DVD DVD DVD Start A Dub Selected Items Select a destination for dubbing, and then a display will appear on the screen.
Network Navi Network Navi features (Continued) Directly connecting Net Dubbing compatible models By directly connecting with the Net Dubbing compatible device, you can dub without the network environment. It is necessary to set the compatible device’s IP address to an address that is different but within the same subnet as the recorder’s. Recorder Net Dubbing compatible device To LAN port To LAN port LAN cable (crossover type, included) 1 Make the “Network Setting” on Setup as in the example below.
Average bit rate: Caution • The operation of Net Monitor is not guaranteed on all PCs. In addition, Net Monitor is not guaranteed to work for future versions of QuickTime®. If you set the average bit rate to high, you will have a better image than if you set the monitor window image to low. However, the data transfer may be unstable due to the communication load.
Network Navi Network Navi features (Continued) View of the monitor window Since an image that is displayed in the monitor window is more compressed than that on TV, the image will be less clear. The following conditions will be displayed in the monitor window. If the screen size is set small and the condition display message is long, a part of the message may not be displayed. “Preparing”: The monitor window is started, and it is preparing for a display.
On “Net Monitor is not available” due to recorder conditions Net Monitor is not available (The connected recorder is now Rate Conversion Dubbing) Recorder condition: DVD-Video menu creating Net Monitor is not available (The connected recorder is creating a “DVD-Video menu”) Conditions: Broadcasting a copy-once or copy prohibited image; playing a copy prohibited image on a disc, previewing of a copy prohibited title, playing of a copy prohibited title on the editing screen Net Monitor is not available (
Network Navi Network Navi features (Continued) • Toshiba is not responsible for any damage or loss caused directly or indirectly by the failure of the recorder to record content intended to be recorded. • Toshiba is not responsible for, nor has any control over, any content recorded and/or viewed using the recorder.
The recorder receives timer recording setting email on the POP server at 15-minute intervals. When setting is successful (setting completion email) • The remaining space on the internal HDD can be checked using email. Enter the following in the body of the email. e.g. open rdstyle prog remain Remaining space Editing When the recorder receives the timer recording setting email, you can receive email that notifies you of setting completion or setting failure. Make the following settings.
Network Navi Network Navi features (Continued) If you are having a difficulty with Network Navi features... The following are Network Navi features each of which must be set for proper operation. Complete the basic settings as in the table below, and then make appropriate changes to the settings. If the Network Navi features are not operating, check the settings again to make sure all inputs are correct.
Function setup You can change the default settings to customize performance to your preference. Customizing the function settings RD-XS55SU_Ope_E_p171-188 171 06.3.
Function setup HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD CD Customizing the function settings You can change the default settings to customize performance to your preference. 1 Press SETUP. The following setup display appears. SETUP e.g. DVD player settings DVD disc menu language English DVD audio language English No subtitle DVD subtitle language DVD d i l O 2 Press / to select the icon of a group that contains a desired item, then press ENTER. SETUP For details on each setting, see the next page.
Details Page DVD player settings DVD disc menu language To select a preferred language for disc menus. 176 To select a preferred language for the sound track. 176 To select a preferred language for subtitles. 176 To turn on or off a function that makes faint sounds easier to hear even if you lower the volume during late-hour playback. 177 To turn on or off the vocal output during DVD KARAOKE disc playback. 177 DVD-VIDEO DVD parental lock To turn the parental lock function on or off.
Function setup Customizing the function settings (Continued) Setting Details Page Display settings TV shape To select a picture size according to the aspect ratio of your TV. 181 To activate or deactivate the operational status display (e.g., ) on the TV screen. 181 To select the transparency of the on-screen menus relative to background pictures. 181 Startup screen To turn on or off the start-up screen setting that makes the background picture appear automatically when turning on the power.
Setting Details Page DVD recorder operation To select picture and sound quality settings for a manual program recording. 183 To make further settings when you cannot adjust the image quality with “Custom picture setting” of the “Picture/audio settings”. 184 To select the black level of recording pictures. 184 To set the aspect ratio for DVD-R recording. 184 To set the audio for DVD-R recording.
Function setup Customizing the function settings (Continued) DVD player settings DVD disc menu language e.g. DVD-VIDEO DVD player settings DVD disc menu language English DVD audio language English DVD subtitle language No subtitle DVD dynamic range control On Karaoke vocal Off English: To display disc menus in English. French: To display disc menus in French. 1) Obtain the language code of the preferred language from the Language Code List ( page 195). Spanish: To display disc menus in Spanish.
Introduction DVD parental lock 4) Press ENTER button. DVD dynamic range control Off: The DVD Dynamic Range Control does not function. The DVD Dynamic Range Control functions. Karaoke vocal Select this to activate Parental Lock function or to change the setting. After pressing ENTER button, follow steps 1) – 3) below. Off: Deactivate the Parental Lock function. After pressing ENTER button, follow steps 1) below. 1) Enter a 4-digit password by using the number buttons, then press ENTER button.
Function setup Customizing the function settings (Continued) Country/Area AUSTRALIA BELGIUM CANADA CHINA CHINA HONG KONG DENMARK FINLAND FRANCE GERMANY INDONESIA ITALY JAPAN MALAYSIA NETHERLANDS NORWAY PHILIPPINES RUSSIAN FEDERATION SINGAPORE SPAIN SWEDEN SWITZERLAND TAIWAN THAILAND UNITED KINGDOM UNITED STATES Code AU BE CA CN HK DK FI FR DE ID IT JP MY NL NO PH RU SG ES SE CH TW TH GB US To change the limitation level of Parental Lock function Follow step 1) - 3) above.
Introduction Picture/Audio settings Pause/Still HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO Normal setting. Pause the moving image without blurring. Frame: Displays high resolution still image. Output Black level HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD You can adjust the black level of the output signal. Standard: Normal black level. Enhanced: Note • This function is not available when the HDMI connection is used. Editing To display deeper, richer black than in “Standard” setting.
Function setup Customizing the function settings (Continued) Play DNR HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO Analog 2ch: VCD Selects a setting for playback at a reduced noise level. Press / buttons to select an item then select “On” or “Off” using / buttons. 3D-DNR: Select this when a TV or other audio device is connected to this recorder via the ANALOG output connectors. PCM: Select this when a 2ch digital stereo amplifier is connected to this recorder.
Introduction Display settings TV shape SAP Off: The main sound is received. HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO Select a picture size according to the aspect ratio of your TV. For details on this setting, see “TV shape setting” ( page 48, “INSTALLATION GUIDE”). Recording SAP (Second Audio Program broadcast) is separate audio program, usually broadcast in a second language with the main language. On: SAP sound (second language) is received.
Function setup Customizing the function settings (Continued) Operational settings Operation beep Off: Deactivates the screen protector function. On: Activates the screen protector function. Note • Toshiba does not guarantee that this function protects the TV screen by all means. HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD CD Turn on or off a confirmation beeper announcing when a command is received. Off: Turns off the beep sound. On: Turns on the beep sound.
Introduction DVD recorder operation User record quality Instant replay interval HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD CD 5 sec. : 10 sec. : 30 sec. : 5 min. DVD-RAM DVD-RW DVD-R You can select from 5 combined picture and sound quality recording settings prior to actual recording. Actual selection applied becomes the default setting for normal recording or programmed recording. e.g. Title thumbnail point HDD DVD-RAM DVD-RW DVD-R 0 sec. : 3 sec. : 10 sec. : 35 sec. : 1 min. : 5 min.
Function setup Customizing the function settings (Continued) Aspect ratio(Video mode) Picture record mode HDD DVD-RW DVD-RAM DVD-RW DVD-R DVD-R Adjusts problems with the brightness of video signals of TV broadcasts or other external input. To set the aspect ratio when recording onto a DVD-R/RW disc. Press / buttons to select the source, and to select the mode.
Introduction DVD-Video:CHP create DVD-RW Relay recording HDD DVD-R Off: Chapters are not set. 5 min. : 10 min. : 15 min. : 20 min. To set the interval at which chapters are automatically created to 5, 10, 15 or 20 minutes. Turn on or off a function that makes a recording automatically onto the HDD when the remaining space of a DVD-RAM disc is reduced to less than 10 minutes or when a disc is not loaded. Off: Deactivates this function.
Function setup Customizing the function settings (Continued) Management settings Network Setting See “Network Navi” ( HDD auto stop HDD page 147). Off: Turns off the HDD auto stop mode. Genre setting HDD On: DVD-RAM DVD-RW DVD-R This registers a frequently used genre name onto the menu. Genre names registered here are displayed in the “Genre” on Quick Menu. 1) Press / buttons to select a position in the “Current Genre List” you want to change, then press ENTER button. A list of genres appears.
Introduction Initial settings Language HDD format To set a preferred language for on-screen displays. HDD English: Recording Initializes the HDD. Normally it is not required to initialize the HDD. However when the HDD does not function correctly, initializing the HDD may solve the situation. If you initialize the HDD, all titles and library information stored in the HDD are permanently deleted. To view on-screen display in English. French: To view on-screen display in French.
Function setup Customizing the function settings (Continued) Setting of picture and sound quality for recording Sound setting D/M1 D/M2 L-PCM Picture quality setting DVD HDD DVD HDD DVD HDD SP Yes Yes Yes Yes No No LP Yes Yes Yes Yes No No MN Yes Yes Yes Yes Yes Yes 188 RD-XS55SU_Ope_E_p171-188 188 06.3.
Others Before calling service personnel Output sound conversion table Error codes on the display window Recording duration Language Code List Specification RD-XS55SU_Ope_E_p189-199 189 06.3.
Others Before calling service personnel If you experience any of the following difficulties while using this unit, check the list below before consulting your nearest Toshiba dealer. Power Playback The power is not turned on. A DVD or CD does not play. • The power cord is not connected securely. → Connect the power cord securely. • The format of the recorded data does not correspond to this recorder, or the region number is neither “1” nor “ALL”. → Check the disc.
Introduction Recording Remote control Cannot be recorded on the HDD. Library • The DVD mode is selected. → Press HDD button. • The disc space of the HDD is not sufficient. → Delete unwanted data ( page 55) or move the contents to DVD-RAM discs ( page 100). • Some causes such as power failure may set the recorder to reject the operation to protect the HDD. → Copy necessary contents recorded in the HDD to a DVD-RAM disc, and initialize the HDD. Clock The clock blinks. → Set the clock ( page 187).
Others Output sound conversion table Audio setting ( Bitstream Disc BITSTREAM/ PCM jack HDMI OUTPUT jack Sound format Bitstream 48 kHz/16 bit 48 kHz/16 bit 48 kHz/16 bit DVD48 kHz/16 bit video 48 kHz/16 bit disc* 48 kHz/16 bit Bitstream DTS Bitstream MPEG2 44.1 kHz/16 bit VIDEO CD MPEG1 Audio Linear PCM 44.1 kHz/16 bit 44.
Others Error codes on the display window Error code Description ERR-01 Error detected in the physical format. ERR-10 Exceeded volume detected. ERR-11 Exceeded number of titles detected. ERR-12 Exceeded number of chapters detected. ERR-13 Copy protection information detected. ERR-14 DVD disc access error detected. ERR-15 Other errors detected. ERR-16 HDD access error detected. ERR-17 Wide image recorded at 1.4 Mbps detected. ERR-18 Different aspects detected in the same part.
Others Recording duration Sound rate Picture quality rate 1.0 1.4 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4 4.6 4.8 5.0 5.2 5.4 5.6 5.8 6.0 6.2 6.4 6.6 6.8 7.0 7.2 7.4 7.6 7.8 8.0 8.2 8.4 8.6 8.8 9.0 9.
Others Language Code List Introduction Table of languages and their abbreviations Abbreviation 195 RD-XS55SU_Ope_E_p189-199 195 06.3.
Others Specification ■ Power requirement during operation 33.0W ■ Power requirement at standby 17.2W (Front panel display: on) 15.1W (Front panel display: off) ■ Power supply ■ COMPONENT output (Y, PB, PR) Y output (green), 1.0Vp-p (75Ω), Sync signal negative, Pin jack x 1 system PB, PR output (blue, red), 0.7Vp-p (75Ω), Pin jack x 1 system each ■ AUDIO input 2.0V (rms), 22kΩ or above, pin jack (L, R) x 3 systems 2 at rear, 1 in front 120V AC, 60 Hz ■ Mass ■ AUDIO output 5.
Memo Introduction Recording Playback Editing Library Network Navi Function setup Others 197 06.3.
Memo 198 RD-XS55SU_Ope_E_p189-199 198 06.3.
Memo Introduction Recording Playback Editing Library Network Navi Function setup Others 199 06.3.