Network Card User's Manual
9
6 F 3 B 0 3 5 6
1.3 S-LS overview
The S-LS (TOSLINE-S20 Loader System) on a personal computer (PC) monitors station
conditions, reads/writes control data, and sets up parameters. The transmission parameters set by
S-LS is stored in the S20LP-station's built-in EEPROM.
Connection between S-LS and S20LP-station is made by an loader cable, that is the same cable
as for T-PDS.
The following are the details of the menu. Select an intended station in the Station Connection
Diagram window for display and specify the window in the menu or the toolbar.
[File]
[Display Scan Address List] Displays the Scan Address List window.
[Display Station Down Information] Displays Down Information when the local station is downed.
[Save Files All Station’s Information] Saves the setup information of all stations in the file.
[Exit] Terminates the application.
[Menu]
[Setting Information] Displays the Setting Information window.
[Data Access] Displays the Data Access window.
[RAS Information]
[Online Map] Displays the Online Map window.
[Scan Healthy Map] Displays the Scan Healthy Map window.
[Loop Map] Displays the Loop Map window.
[Station Status] Displays the Station Status window.
[Station Down Information] Displays the Station Down Information.
[RAS Counter Information] Displays the RAS Counter Information
[Online/Standby Request] Displays the Online/Standby Request window.
[Test Request] Displays the Test Request window.
[Option]
[Station Display Position]
[Registration] Registers the display positions of the stations rearranged.
[Display] Reflects the display positions of the registered stations in the window.
[Normal] Displays the stations rearranged in the ascending order of smaller display
position numbers.
[Communication Environment Setting] Displays the Communication Environment Setting window.
[Window]
[Display Small Size] Displays the Station Connection Diagram in small size.
[Help]
[Contents] Displays the Help window.
[Key Word Search] Displays the Retrieve window in Help.
[Version Information] Displays the information of the application version.