Network Card User's Manual

 21 
6 F 3 B 0 3 5 6
3.3 Settings on S-LS
(1) Start-up the S-LS
Connect the S-LS (personal computer) and the S20LP-station by the loader cable. Start-up
the S-LS for Windows95.
(2) Turn the T2N/T3H to HALT
(3) Confirm the S20LP-station status
Confirm the status of the connected S20LP-station is "STANDBY" by right and upper side.
It is displayed on the S-LS screen as below.