User Guide

3.20 Only One Test 3 Tests and Diagnostics
3-44 Satellite R10 Maintenance Manual (960-509)
Subtest 03 Kill Switch
This subtest checks if the Wireless communication switch works properly.
If the test is started with the switch ON, the following message appears in the
display.
Kill switch is set to a start position (OFF)
Slide the switch to OFF position. Then, the following message appears in the
display.
KILL SWITCH ON !!
Slide the switch to ON position. Then, the following message appears in the display.
KILL SWITCH OFF !!
After Sliding the switch to OFF position, the screen returns to the Only One Test
menu automatically.
Subtest 04 USB
NOTE: When executing this subtest, USB test module and USB cable must be
connected.
This subtest checks if USB ports work properly.
The following menu appears in the display.
################################################################
#
######## USB Port Select (XXXXXXXXX) #######
################################################################
#
* *
* 0 ............ Port 0 (Back) *
* 1 ............ Port 1 (Left side back)
*
* 2 ............ Port 2 (Left side front) *
* *
* 9 ............ EXIT to Only One Menu
*
* *
****************************************************************
*
.... Press test number[0-2, 9] ?