User Guide

3.20 Only One Test 3 Tests and Diagnostics

3-46 Satellite R10 Maintenance Manual (960-509)

Subtest 06 Acceleration sensor

This subtest detects and corrects the each axis (X, Y, Z).

NOTE: Make sure that this subtest is executed on the following condition:

1. Flat desk with vertical plane to get the stability of machine.

2. Prevent the machine from shake or shock.

The figure below shows the name and position of each side.

Figure 3-1 Name and positions of each side

Vertical plane

Flat desk

Set the machine

against the vertical plane

with the Front upward

Right side

(right)

Left side

(left)

Back

Front

Top

(heaven surface)