User Guide

3.20 Only One Test 3 Tests and Diagnostics
3-48 Satellite R10 Maintenance Manual (960-509)
When a defective is found during the each check above, the following message
appears in the display. The test is halted at the point when the defective is found.
** Setting ERROR! **
Press [Enter] key
Press Enter and return to the Only One Test menu. Then execute the test again.
Subtest 07 Button
This subtest checks if the buttons in the following figure work properly.
The following message appears in the display.
Press [Windows Security Button] key
Press Windows security button. Then the following message appears in the display.
Press [Escape/Rotation Button] key
Press Escape/Rotation button. Then the following message appears in the display.
Press [Cross Function Button] key
Press Cross Function button. If the test ends successfully, the screen returns to the
ONLY ONE TEST menu automatically.
Windows Security Button
ESC/Rotation Button
Cross Function Button