User Guide

3 Tests and Diagnostics 3.32 SETUP
Satellite R10 Maintenance Manual (960-509) 3-107
10. PCI Bus
This option displays the interrupt level for the Card Bus in the computer. It is for information
only and cannot be changed.
PCI BUS = IRQ10, IRQ11
11. Display
This group of options configures the computer’s display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected Selects an external monitor if one is connected. Otherwise it
selects the internal LCD. (Default)
LCD+AnalogRGB Selects both the internal LCD and the external CRT for
simultaneous display.
System LCD only Selects only internal LCD display.
NOTE: When starting the computer in Standby or Hibernation, the last configuration is
saved. If data does not appear on the display you are using after starting in
Standby or Hibernation, pressing Fn+F5.
Pressing Fn+F5 changes the display setting as follows in order: the internal
LCD, the external CRT, both the internal LCD and the external CRT.
When an external CRT display, which does not support SVGA mode is connected
and “LCD+AnalogRGB” is selected, the external display is not displayed.
(b) LCD Display Stretch
LCD Display Stretch enables or disables a larger display area of the screen.
Enabled Enables the LCD display stretch feature. (Default)
Disabled Disables the LCD display stretch feature.
(c) TV type
This option allows you to select the type of TV.
NTSC (Japan) ; TV in Japanese system
NTSC (US) ; TV in the U.S. system
PAL ; TV in Europe etc. system