User Guide

3 Tests and Diagnostics 3.32 SETUP
Satellite R10 Maintenance Manual (960-509) 3-109
12. Peripheral
Use this option to select the peripheral's mode.
(a) Internal Pointing Device
This option enables or disables the touch pad
Enabled Enables the touch pad. (Default)
Disabled Disables the touch pad.
(b) Parallel Port Mode
Use this option to set information of Parallel Port Mode.
ECP Sets the port mode to Extended Capabilities Port (ECP). For
most printers, the port should be set to ECP. (Default)
Std. Bi-Direct. Sets the bi-directional setting. This setting should be used with
some other parallel devices.
NOTE: When using Windows, the setting of “Toshiba HW setup” is enabled and the
setting of “Parallel Port Mode” is disabled.
(c) Hard Disk Mode
Use this option to select the hard disk mode.
Enhanced IDE (normal)
Select this mode when the HDD is used for MS-DOS? ,
Windows 95/98/2000/XP, or OS/2? . (Default)
Standard IDE Select this mode when using an OS which does not support the
Enhanced IDE. When this mode is selected, up to 528MB is
logically available and the rest of the capacity is not usable.
NOTE: Formats for Enhanced IDE and Standard IDE are different, so if you change the
setting, you will have to reformat the hard disk for the appropriate setting.