User Guide

4.4 Memory module 4 Replacement Procedures
4-12 Satellite R10 Maintenance Manual (960-509)
4.4 Memory module
Caution: The power must be turned off when you remove the memory module.
Removing a memory module with the power on risks damaging the module
or the computer itself.
Do not touch the memory module terminals. Any dirt on the terminals may
cause memory access problems.
Never press hard or bend the memory module.
Removing the memory module
To remove the memory module(s), confirm that the computer is in boot mode. Then
perform the following procedure. (See Figure 4-4.)
1. Turn the computer upside down.
2. Loosen the screw (with e-ring) fixing the memory slot cover.
3. Remove the memory slot cover.
4. Open the left and right latches and remove the memory module(s).
Figure 4-4 Removing the memory module
Screw (with e
-
ring)
Memory slot cover
Memory module