User Guide

4.6 Selectable bay module 4 Replacement Procedures
4-16 Satellite R10 Maintenance Manual (960-509)
4.6 Selectable bay module
Removing a selectable bay module
The following describes the procedure for removing a selectable bay module. (See Figure
4-7 and 4-8.)
1. Turn the computer upside down.
2. Move the following screw (if the screw is secured in the lock screw hole) from
lock position to unlock position.
? M2.5x4.0B FLAT BIND screw x1
3. Pull out a selectable bay module from the selectable bay while sliding the lever.
Figure 4-7 Removing a selectable bay module
M2.5x4.0B FLAT BIND
Selectable bay module
Loc
k position
Unlock position
Lever