User Guide

4.6 Selectable bay module 4 Replacement Procedures
4-18 Satellite R10 Maintenance Manual (960-509)
Installing a selectable bay module
The following describes the procedure for installing a selectable bay module. (See Figure
4-7 and 4-8.)
1. Install the plastic frame to the selectable bay module and secure them with
following screws.
? M2.0x3.0S S-THIN FLAT BIND screw x5
2. Install the OD board and plastic brace to the selectable bay module and secure
them with following screws.
? M2.0x8.0S BIND screw x2
3. Insert a selectable bay module into the selectable bay of the computer.
4. Turn the following screw (if you want to lock the selectable bay) from unlock
position to lock position.
? M2.5x4.0B FLAT BIND screw x1