User Guide

4.7 Keyboard 4 Replacement Procedures
4-20 Satellite R10 Maintenance Manual (960-509)
Installing the keyboard
The following describes the procedure for installing the keyboard. (See Figure 4-9.)
1. Put the keyboard on the palm rest as its face is down. Connect the keyboard
flexible cable to CN3200 on the system board and lock the connector.
2. Hook the bottom edge of the keyboard to the palm rest. Place the keyboard on the
computer and secure it with the following screws.
? M2.5x2.8B FLAT BIND screw x2
3. Fit to install the keyboard holder.