User Guide

4.9 Battery latch assembly / Selectable bay lock 4 Replacement Procedures
4-24 Satellite R10 Maintenance Manual (960-509)
4.9.2 Selectable bay lock
Removing the selectable bay lock
The following describes the procedure for removing the selectable bay lock. (See Figure
4-13.)
1. Release the tabs (2 points) and detach the selectable bay lock.
2. Remove the selectable bay lock from the bottom cover assembly.
Figure 4-13 Removing the selectable bay lock
Installing the selectable bay lock
The following describes the procedure for installing the selectable bay lock. (See Figure
4-13.)
1. Hook the tabs (2 points) and install the selectable bay lock to the bottom cover
assembly.
Caution: Selectable bay lock has different shapes of tabs for each side (2 points).
Therefore, be sure to fit their shapes for installation.
tab
Selectable bay lock