User Guide

4.11 MDC / modem cable 4 Replacement Procedures
4-28 Satellite R10 Maintenance Manual (960-509)
6. Open the insulators and pull out the modem cable from the insulators.
7. Remove the following screw and disconnect the drain cable 2 from the stud of
hinge assembly.
? M2.0x4.0Z BIND screw x1
8. Disconnect and remove the modem cable from the connector CN3001 on the
system board.
Figure 4-17 Removing the modem cable
Modem cable
CN3001
Insulator
Drain cable 2
M2.0x4.0Z
BIND
M2.0x4.0Z
BIND
or
M2.0x4.0B LH STICK