User Guide

4.13 Fan / CPU 4 Replacement Procedures
4-32 Satellite R10 Maintenance Manual (960-509)
4.13 Fan / CPU
4.13.1 Fan
Removing the fan
The following describes the procedure for removing the fan. (See Figure 4-19.)
1. Disconnect the fan cable from the connector CN8770 on the system board.
2. Remove the following screws securing the fan and remove the fan.
? M2.0x4.0B FLAT BIND screw x2
Figure 4-19 Removing the fan
Installing the fan
The following describes the procedure for installing the fan. (See Figure 4-19.)
1. Install the fan while fitting the screw holes and secure it with the following screws.
? M2.0x4.0B FLAT BIND screw x2
2. Hook the fan cable to the guide and connect it to the connector CN8770 on the
system board.
Guide
M2.0x4.0B FLAT BIND
Fan
CN8770
M2.0x4.0B FLAT BIND