User Guide

4 Replacement Procedures 4.13 Fan / CPU
Satellite R10 Maintenance Manual (960-509) 4-33
4.13.2 CPU
Removing the CPU
The following describes the procedure for removing the CPU. (See Figure 4-20 and 4-
21.)
1. Remove the following screws securing the CPU hold plate in the reverse order of
the number (3? 1) on the CPU hold plate and remove the CPU hold plate.
? M2.0x4.0B BIND screw x3
2. Remove the heat sink on the CPU.
Figure 4-20 Removing the heat sink
3. Unlock the CPU by rotating counterclockwise the cam on the CPU socket by 90
degrees with a flat-blade driver.
4. Remove the CPU.
Figure 4-21 Removing the CPU
M2.0x4.0B BIND
M2.0x4.0B BIND
CPU hold plate
Heat sink