User Guide

4 Replacement Procedures 4.15 Penholder / RTC battery
Satellite R10 Maintenance Manual (960-509) 4-37
4.15.2 RTC battery
Removing the RTC battery
The following describes the procedure for removing the RTC battery. (See Figure 4-25.)
1. Pull out the RTC batter cable from the guide of penholder.
2. Remove the RTC battery from the slot of penholder.
Figure 4-25 Removing the RTC battery
Installing the RTC battery
The following describes the procedure for installing the RTC battery. (See Figure 4-25.)
1. Install the RTC battery to the slot of penholder.
2. Arrange the RTC battery cable to the guide of penholder.
RTC battery
Penholder