User Guide

4.18 QI board / CN board 4 Replacement Procedures
4-42 Satellite R10 Maintenance Manual (960-509)
4.18 QI board / CN board
4.18.1 QI board
Removing the QI board
The following describes the procedure for removing the QI board. (See Figure 4-28.)
1. Remove the following screws securing the QI board.
? M2.0x6.0B FLAT BIND screw x2
2. Pull up the QI board straight and remove the QI board from the cover assembly.
Figure 4-28 Removing the QI board
Installing the QI board
The following describes the procedure for installing the QI board. (See Figure 4-28.)
1. Install the QI board to the cover assembly and secure it with the following
screws.
? M2.0x6.0B FLAT BIND screw x2
M2.0x6.0B FLAT BIND
QI boa
rd