User Guide

4 Replacement Procedures 4.18 QI board / CN board
Satellite R10 Maintenance Manual (960-509) 4-43
4.18.2 CN board
Removing the CN board
The following describes the procedure for removing the CN board. (See Figure 4-29.)
1. Remove the following screws securing the CN board.
? M2.0x6.0B FLAT BIND screw x2
2. Pull up to remove the CN board from the cover assembly.
Figure 4-29 Removing the CN board
Installing the CN board
The following describes the procedure for installing the CN board. (See Figure 4-29.)
1. Install the CN board to the cover assembly and secure it with the following
screws.
? M2.0x6.0B FLAT BIND screw x2
M2.0x6.0B FLAT BIND
CN board