User Guide

4 Replacement Procedures 4.21 Speaker
Satellite R10 Maintenance Manual (960-509) 4-47
4.21 Speaker
Removing the speaker
The following describes the procedure for removing the speaker. (See Figure 4-32.)
1. Turn up the insulator.
2. Pull out the speaker cable from the guide insulator of cover assembly.
3. Pull out the speaker from the slot of cover assembly.
Figure 4-32 Removing the speaker
Installing the speaker
The following describes the procedure for installing the speaker. (See Figure 4-32.)
1. Install the speaker to the slot of cover assembly.
NOTE: When installing the speaker, confirm the right installation of right and left
speaker. (Right = Red and Green cable, Left = White and Green cable).
2. Arrange the speaker cable along the guide insulator.
3. Stick the insulator over the guide of speaker cable.
Guide insu
lator
Speaker cable
Insulator
Speaker (R)
<White & Green cable
>
Speaker (L)
<Red & Black cable >
Guide insulator