User Guide

4 Replacement Procedures 4.22 Microphone / Front panel
Satellite R10 Maintenance Manual (960-509) 4-49
4.22.2 Front panel
Removing the front panel
The following describes the procedure for removing the front panel. (See Figure 4-34.)
1. Remove the following screws and front panel from the cover assembly.
? M2.5x6.0B FLAT BIND screw x2
2. Detach the display latch from the front panel.
Figure 4-34 Removing the front panel
Installing the front panel
The following describes the procedure for installing the front panel. (See Figure 4-34.)
1. Install the display latch to the front panel.
2. Install the front panel to the cover assembly and secure it with the following
screws.
? M2.5x6.0B FLAT BIND screw x2
M2.5x6.0B FLAT BIND
Front panel
Display latch