User Guide

4.23 Lens holder 4 Replacement Procedures
4-50 Satellite R10 Maintenance Manual (960-509)
4.23 Lens holder
Removing the lens holder
The following describes the procedure for removing the lens holder. (See Figure 4-35.)
1. Remove the following screw securing the lens holder.
? M2.5x4.0B S-THIN FLAT BIND screw x1
Remove the lens holder from the cover assembly.
Figure 4-35 Removing the lens holder
Installing the lens holder
The following describes the procedure for installing the lens holder. (See Figure 4-35.)
1. Install the lens holder to the cover assembly.
2. Secure the lens holder with the following screw.
? M2.5x4.0B S-THIN FLAT BIND screw x1
M2.5x4.0B S
-
THIN FLAT BIND
Lens holder